Steel Ruler

  • Items 1 - 24 of 29
  • Page:
    1. 1
    2. 2
Related Categories: Metal Ruler | Ruler | Measuring | Hook Ruler | Rule | Steel Rule | Starrett | Incra
  1. INCRA Precision Marking Rules

    INCRA Precision Marking Rules

    The first stainless steel rule with micro-fine guide holes for marking a fine dot with a sharp pencil or metal scribe.

    3 Review(s)
    From: $13.99
  2. iGaging Hooked Rulers

    iGaging Hooked Rulers

    Measure accurately down to the nearest 1/64" with a Hook Rule! High quality rules are made from hardened and tempered stainless steel and have an adjustable hook that may be used on either side. Use it to measure dimensions from the edge of any board. Precision etched for long life and readability,…

    1 Review(s)
    From: $9.99
  3. 12'' Centerpoint Rule

    12'' Centerpoint Rule

    …the exact center every time. Find dead-center on your project by simply matching numbers. Just measure the end points (say, 7 3/8" ), then find the corresponding number (7 3/8" ) on the lower scale. Made of durable tempered stainless steel with etched, black-filled numbers in standard markings.

    6 Review(s)
    $13.99
  4. iGaging 12'' Combination Square

    iGaging 12'' Combination Square

    …plumb, and precision tool. Made of hardened steel with a satin chrome finish blade. Easy-to-read graduations of 8ths, 16ths, 32nds, and 64ths. Features a level vial and a hardened scribe tool. Includes storage case. Technical Details:* Hardened steel construction* Satin chrome finish blade*…

    4 Review(s)
    $29.99
  5. iGaging Precision Straight Edges with Rulers

    iGaging Precision Straight Edges with Rulers

    …means they double as precision rulers. Available in 12", 24" and 36" lengths, they feature a hanging hole, and include a protective case if you prefer to store them in a drawer. Technical Details:* iGaging Precision Straight Edges are made of hardened steel.* Accuracy: 0.001".* Thickness: 3/16".*…

    2 Review(s)
    From: $26.99
  6. iGaging 12'' Center Rule & Angle Gauge

    iGaging 12'' Center Rule & Angle Gauge

    Use this multifunction ruler to dial in the angle on your bevel gauge, find centers for drilling drawer knobs, set the height on your table saw or router table, or simply as a standard ruler. One face features a precision angle gaugefrom 0-50°, while the other has a 6" x 6" center rule along one…

    $19.99
  7. Starrett 6'' Rule

    Starrett 6'' Rule

    …The first two long edges are graduated in 8ths and 16ths, while the edges on the flip-side are graduated in 32nds and 64ths. Finely-etched black lines on a satin steel background make for easy reading and minimal glare. Rigid tempered steel won't bend out of shape. End graduations go up to 1/2".

    3 Review(s)
    $29.49
  8. Oshlun 12'' Combination Square, 3 Piece Set

    Oshlun 12'' Combination Square, 3 Piece Set

    This high quality 12-Inch combination square set features a slotted and etched stainless steel blade with 1/8", 1/16", 1/32" and 1/64" scales and includes a square head with 45° shoulder, center head and a protractor head with a double 180°protractor scale (all with reversible lock bolts).…

    4 Review(s)
    $69.99
  9. 4" Engineer Square

    4" Engineer Square

    Our engineer squares with stainless steel rules, are the ideal choice for setting up machinery like table saw blades, jointer knives and fences. Accurate to .002". Great for marking stock for joints or checking stock for squareness. Both squares are notched where the beam and rule meet for drawing…

    5 Review(s)
    $12.99
  10. 6'' Tri-Miter Square by Crown Hand Tools

    6'' Tri-Miter Square by Crown Hand Tools

    …Features a hardened, tempered and blued steel blade with rosewood stock. Fitted with Brass, this tool is accurate, attractive and a must for the traditional craftsman! Technical Details:* Manufactured to British Standard BS3322* Hardened, tempered and blued steel blade* Rosewood stock* Fitted with…

    7 Review(s)
    $28.49
  11. Bevel Setting Protractor

    Bevel Setting Protractor

    …inside angles to outside angles. Simple to use; just loosen the knob to adjust. The anchored lock washer prevents the bar from shifting as it's tightened. Deeply etched scale lines won't wear off. Machined from stainless steel. Protractor head measures 2" x 3-1/2". Measures 7-3/4" long at 90°.

    1 Review(s)
    $18.99
  12. 3' Steel Center Square

    3' Steel Center Square

    Quickly and easily locate the center of round and square stock up to 6" in diameter.* The 3mm thick beveled blade is made from spring steel and is hardened and ground for extended life.* Solid steel right angle stock is 3/8" thick.* Comes in a convenient snap-close vinyl storage case.

    8 Review(s)
    $24.99
  13. Tool Pouch with 8-inch Clip Rail

    Tool Pouch with 8-inch Clip Rail

    …space for screws and other fasteners while nine narrower slots accommodate drill bits, drivers, pencils, rulers and more. Technical Details:* Made of durable polyester fabric.* Two steel clips allow mounting onto the included 8-inch Clip Rail.* Also can be used with the 16-inch Clip Rail (43875,…

    $12.99
  14. Lumber-Lok™ Plate Vise™

    Lumber-Lok™ Plate Vise™

    …tight for safe, accurate cuts* Ports for 1" x 4", 1" x 6", 2" x 2", 2" x 4", 2" x 6", 2" x 8", 2" x 10", 2" x 12", 4" x 8"* Elevates materials off the ground for safe cutting* Won't allow stock to move or spin* Rugged steel construction yet easily carried from one work site to another* Made in USA

    1 Review(s)
    $31.49
  15. Rockler Measuring Kit

    Rockler Measuring Kit

    This complete Rockler Measuring Kit includes three tools to help make all yourmeasuring and assembly tasks quicker and easier!* Square Check* EZ-Mark Line Cords* Biscuit Cutter Gauge Square Check Features:* Prevents your tape measure from slipping off the corner while measuring diagonals* 90°…

    $19.97 $10.99

    SAVE 45%

  16. Oshlun 6'' Fractional Dial Caliper

    Oshlun 6'' Fractional Dial Caliper

    …increments are on the inner scale. Technical Details:* For inside, outside, depth and step measurements.* 0-6" range.* Graduation to 0.01" and 1/64".* Features easy-to-read dial with 1" range per revolution.* Machined from hardened stainless steel for long life.* Comes in a foam-padded plastic case.

    7 Review(s)
    $49.99
  17. 4'' Mini Try Square

    4'' Mini Try Square

    The must-have tool for laying out precise 90° angles, checking internal angles, marking stock or using as a guide for mortising.* Rosewood handle with 4-3/8" hardened steel blade.* Triple rivets ensure constant accuracy.

    1 Review(s)
    $21.49
  18. 45/90 Degree Stainless Steel Miter Gauge

    45/90 Degree Stainless Steel Miter Gauge

    Used for precise 45° and 90° reference, this solid steel gauge has applications allover the shop. Lay out miters for picture frames or trim; set blade angles; check corners for square — the possibilities are endless. A sturdy base allows it to stand upright. Interior windows add…

    4 Review(s)
    $27.99
  19. Wixey 3'' Digital Protractor

    Wixey 3'' Digital Protractor

    Versatile, precise and convenient, the Wixey™ Digital Protractor measures angles in any plane with 0.1° resolution, accuracy, and repeatability. At only 3", it is small enough to work in a tight spot. Use it for a variety of applications, from measuring and layout to setting miter and bevel…

    5 Review(s)
    $52.99
  20. 4'' Steel Engineer Square

    4'' Steel Engineer Square

    This 4" steel engineer square is perfect for setting up machinery, marking stock for joints or checking stock for squareness.

    4 Review(s)
    $15.99
  21. Safety Speed Cut C4 Vertical Panel Saw w/Accessory Package

    Safety Speed Cut C4 Vertical Panel Saw w/Accessory Package

    …is not available Standard Equipment:* 3-1/4 HP, 15 Amp industrial duty saw motor* Zinc plated 1-3/4" steel guide tubes* 4 Nylatron roller bearing systems* Adjustable vertical and horizontal rulers* Thin material pressure guard* Spring loaded counter balance system* Injection-molded plastic material…

    From: $2108.00
  22. Safety Speed Cut C4 Vertical Panel Saw

    Safety Speed Cut C4 Vertical Panel Saw

    …welded steel frame. Ideal for construction sites, sign shops and shops with size limitations. The C4 is ideal for cutting 4' x 8' sheets of material. This industrial saw runs on 15 amps with a 3-1/4" HP Milwaukee motor, 4 roller bearing systems, rotating saw head, adjustable rulers and a…

    From: $1509.00
  23. 3-Piece Engineer Square Set

    3-Piece Engineer Square Set

    …set is great for setting up and checking machines and projects for extreme accuracy to 0.00063".* Includes 2", 4" and 6" precision steel squares.* Hardened spring steel blades are permanently fixed to the stock with tapered self-locking rivets for complete rigidity.* Working edges of the blades are…

    21 Review(s)
    $49.99
  24. iGaging 8" Digital Angle Protractor (35-408)

    iGaging 8" Digital Angle Protractor (35-408)

    Take steel blade angle measurement to a new digital degree! Mark miters, check 90°corners and more. Two overlapping steel blades feature inch and millimeter markings to1/16" and 0.1mm. Digital protractor device measures the angle between the blades asthey are slid apart. Measures entire 360°…

    6 Review(s)
    $41.99
  • Items 1 - 24 of 29
  • Page:
    1. 1
    2. 2
Feedback X