Straight

  • Items 1 - 24 of 350
  • Page:
    1. 1
    2. 2
    3. 3
  1. 1/2'' Pattern Router Bit

    1/2'' Pattern Router Bit

    With its 1/4" maximum depth of cut, this straight bit is ideally suited for routing hinge mortises and shallow dadoes. At 1/2" wide, you can rout dadoes in multiple passes to precisely fit stock of almost any thickness. Two flutes for fast, smooth, accurate trim cuts. Ball-bearing guide makes it…

    5 Review(s)
    $18.99
  2. 52'' to 104'' Low Profile Straight Edge Clamp System

    52'' to 104'' Low Profile Straight Edge Clamp System

    …The 52" to 104" Low Profile Straight Edge Clamp does it all. Benefits:* Clamps for use as a straight edge with a router or circular saw* Add the T-fence and it becomes a T-square for laying out your project* Connect two 52" sections to create a 104" long straight edge that's long enough for even…

    20 Review(s)
    $89.99
  3. All-In-One Low-Profile Contractor Clamps, New & Improved!

    All-In-One Low-Profile Contractor Clamps, New & Improved!

    …and wider jaw for more stability! Wide lever handles and a click-lock sliding jaw make it simple to position and secure these clamps for use as a straight edge guide for circular saws and routers and as a fence for your table saw or drill press. A very low 17/32" profile body and flat top allow many…

    89 Review(s)
    From: $41.99
  4. iGaging Precision Straight Edges with Rulers

    iGaging Precision Straight Edges with Rulers

    …drafting, lapping the sole of a handplane, or checking lumber for warp, a precision straight edge is an essential tool for the shop. These premium straight edges are meticulously ground and lapped for straightness and parallelism, and they feature a beveled edge with a precision 1/64" scale, which…

    2 Review(s)
    From: $26.99
  5. Brown Ebony Turning Blanks

    Brown Ebony Turning Blanks

    …in stock. * Native to: South America, particularly Argentina.* Color: Varying shades of dark brown.* Texture: Very fine. Not overly oily.* Grain: Straight or slightly interlocking. Sometimes curly.* Allergies: Sawdust may cause a skin reaction. * Working Properties: Brown Ebony is very hard, and can…

    1 Review(s)
    $3.99
  6. Straight Clock Hands

    Straight Clock Hands

    These hour and minute hands are sold in pre-matched pairs in either black or brass. The minute hand measures 5-3/16" overall with a 4-1/8" sweep (measured from the center of the hole to the tip). Normally, the minute hand should be long enough to reach the outermost edge of the numbers or the minute…

    $2.69
  7. Shutter Control Arms for Movable Louvers

    Shutter Control Arms for Movable Louvers

    Now you can purchase the control arms for your louvered shutters in pre-milled stock-just cut it to the length you need, and round off the cut corners to your liking. These shutter control arms are milled from straight-grained basswood stock, with a bullnose along the long edge. Combine with our…

    $2.19
  8. Ash Burl Sequenced Matched 4-Way Veneer Pack

    Ash Burl Sequenced Matched 4-Way Veneer Pack

    …four ways so you can create beautiful, symmetrical patterns with the grain converging at the middle of a four-way juncture. Veneers also boast straight, parallel edges, and are free of defects to minimize waste. Sheet sizes are 8" x 18". Sold in packs of 4 square feet. 4 sheets per pack.…

    $36.49
  9. Taper / Straight Line Jig

    Taper / Straight Line Jig

    …features a large, ergonomic handle for smooth push-action performance throughout the cut. Plus, with the miter bar removed it doubles as a stable straight line ripping jig. * Measures 31-5/8" x 7-3/4".* Constructed of 1/2" thick MDF.* Includes 36" miter bar.* Indexing marks make angle setting easy…

    44 Review(s)
    $77.99
  10. Dado Jig for Low Profile Straight Edge Clamp System

    Dado Jig for Low Profile Straight Edge Clamp System

    …used with a 1/2" straight bit.* Any straight bit can be used, but the user will have to account for the different offset from the edge of the dado sled. This means you can use a 1/4" straight bit for dadoes under 1/2", or a 3/4" straight bit for wider dadoes.* Works with any straight edge!* For the…

    1 Review(s)
    $44.99
  11. Power Tool Guide Kit For Straight Edge System

    Power Tool Guide Kit For Straight Edge System

    …shop made sled or the 12" x 12" Acrylic Base (sold separately, sku: 42279) and the Rockler Straight Edge System (sold separately: sku: 36495)!* Keeps your router or circular tracked to the Rockler Straight Edge System* Dedicate one sled for each router or circular saw you own for precision cutting…

    1 Review(s)
    $6.99
  12. iGaging Hooked Rulers

    iGaging Hooked Rulers

    Measure accurately down to the nearest 1/64" with a Hook Rule! High quality rules are made from hardened and tempered stainless steel and have an adjustable hook that may be used on either side. Use it to measure dimensions from the edge of any board. Precision etched for long life and readability,…

    1 Review(s)
    From: $9.99
  13. Powermatic 1285 12'' Jointer, 3HP, 1PH, 230V Only, Straight Knife

    Powermatic 1285 12'' Jointer, 3HP, 1PH, 230V Only, Straight Knife

    This 12" jointer offers big capacity and performance in a machine that is loaded with features. Large center-mounted fence assembly adjusts easily via rack and pinion system with ram lock. Preset stops on the fence body allow for fast angle set-up at 45° in and out, and a positive stop for…

    $5383.99
  14. Undersized Plywood Router Bit Set

    Undersized Plywood Router Bit Set

    …dado bits like these will help your joinery fit perfectly, resulting in stronger assemblies and nearly invisible joint lines. This set includes the three most common sizes of straight bits for undersized plywood: 23/32" for 3/4" plywood, 31/64" for 1/2" plywood, and 15/64" for 1/4" plywood.

    10 Review(s)
    $44.99
  15. Rockler Straight Router Bits, 2-Flute, 1/4" Shank

    Rockler Straight Router Bits, 2-Flute, 1/4" Shank

    One of the most common router bits, straight router bits are used to cut grooves, dadoes, rabbets, and for general purpose material removal. They are also capable of cutting mortises. Each bit has two carbide flutes that are precision ground for the smoothest possible cuts, and a long cutting life…

    11 Review(s)
    From: $13.99
  16. Rockwell® Blade Runner™ Jig Saw, Multi-Purpose Precision Cutter

    Rockwell® Blade Runner™ Jig Saw, Multi-Purpose Precision Cutter

    …difficult curved cuts or perfect circles as easily as making long, straight cuts* Magnetic blade storage drawer so you're ready for every cutting situation* Combination miter gauge and rip fence for angled cuts and long, straight cuts* Variable speed motor for controlled cuts* Adjustable safety…

    21 Review(s)
    $178.99
  17. Freud Double Flute Straight Bits-Optional Sizes

    Freud Double Flute Straight Bits-Optional Sizes

    Application: General stock removal with a smooth finish.* Freud straight bits cut smoother than other bits because of the precise shear and hook angles.* End of bit relief allows for fast plunging.* Cuts all composite materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic…

    4 Review(s)
    From: $17.97
  18. 1/8'' Double Flute Straight Bit

    1/8'' Double Flute Straight Bit

    This versatile cutter does a staggering amount of work. It can rout dadoes and rabbets, cut grooves for inlays, rout mortises (both for hinges and tenons), flatten or shape panels, rout specially shaped holes and cleanly cut round holes, and shape and duplicate parts with a template. Plus, you'll…

    2 Review(s)
    $20.99 $14.69

    SAVE 30%

  19. Rockler 4-Pc. Straight Bit Set

    Rockler 4-Pc. Straight Bit Set

    Cut tight-fitting dados, grooves and rabbets for your cabinetry and furniture with this four-piece boxed set of straight router bits. The set includes the most commonly used straight bits: 1/4", 3/8", 1/2" and 3/4", and comes in a convenient storage box. All bits are double flute, combining a smooth…

    5 Review(s)
    $59.99
  20. Talon Pegboard Toolholders   Straight Pegs (12 pcs.)

    Talon Pegboard Toolholders Straight Pegs (12 pcs.)

    These nylon holders stay put, allowing you to take tools down without having holders fall off, and they're virtually unbreakable, too! Pack of 12 Style B 1-3/4" straight toolholders featuring easy, tool-free mounting. To remove use a Phillips screwdriver. Fit 1/4" pegboard holes.

    $10.49
  21. 4-Piece Straight Bit Set - 1/4" Shank

    4-Piece Straight Bit Set - 1/4" Shank

    This straight bit set includes four of the most useful cut diameters of this popular router bit type: 1/4", 3/8", 1/2", and 3/4". They are well suited for joining case goods using dados, grooves and rabbets. Bits are designed to produce up to a 1" cut depth, so they can also be used to cut mortises.…

    $54.99
  22. Rockler Straight Router Bits, 2-Flute, 1/2" Shank

    Rockler Straight Router Bits, 2-Flute, 1/2" Shank

    Precisely machined for square, straight-sided cuts, Rockler Straight Bits are the perfect candidates for dadoes, grooves and mortises of all sizes. All feature sturdy 1/2" shanks, which reduce vibration and chatter for a smoother cut. This in turn translates to tighter joints and stronger joinery.…

    14 Review(s)
    $14.99 From: $9.99

    SAVE 33%

  23. 1/8" Dia. Straight Bit (1/8" Shank)

    1/8" Dia. Straight Bit (1/8" Shank)

    Replacement 1/8" shank carbide-tipped straight bit for use with Rockler's Miniature Dovetail Template & Bit Kit (20618, sold separately). Requires 1/4"-to-1/8" collet adapter.

    $22.99
  24. Straight Panel Bit with Back Cutter P636

    Straight Panel Bit with Back Cutter P636

    Use this Straight Raised Panel Bit with Back Cutter (P636) to cut both straight and arched top door panels! Cuts both the profile on the front of the panel and the rabbet in the back of the panel in one pass, giving you a perfect panel edge thickness every time and a 1/4" tongue for precise fitting…

    $142.99
  • Items 1 - 24 of 350
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X