Straight Router Bit

  • Items 1 - 24 of 113
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Straight, 2-Flute Router Bits - 1/2" Shank

    Rockler Straight, 2-Flute Router Bits - 1/2" Shank

    Precisely machined for square, straight-sided cuts, Rockler Straight Bits are the perfect candidates for dadoes, grooves and mortises of all sizes. All feature sturdy 1/2" shanks, which reduce vibration and chatter for a smoother cut. This in turn translates to tighter joints and stronger joinery.…

    15 Review(s)
    From: $13.49
  2. Rockler Straight, 2-Flute Router Bits - 1/4" Shank

    Rockler Straight, 2-Flute Router Bits - 1/4" Shank

    One of the most common router bits, straight router bits are used to cut grooves, dadoes, rabbets, and for general purpose material removal. They are also capable of cutting mortises. Each bit has two carbide flutes that are precision ground for the smoothest possible cuts, and a long cutting life…

    11 Review(s)
    From: $13.99
  3. Freud® Double Flute Straight Router Bits - 1/2" Shank

    Freud® Double Flute Straight Router Bits - 1/2" Shank

    straight bits cut smoother than other bits because of the precise shear and hook angles.* End of bit relief allows for fast plunging.* Cuts all composite materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    4 Review(s)
    From: $17.97
  4. Rockler Piloted Flush Trim Router Bits - 1/2" Shank

    Rockler Piloted Flush Trim Router Bits - 1/2" Shank

    …used for template work where the template is below the worked material or, alternatively, with a router mounted in a router table where the template is above the worked material. In both cases it is suitable for straight and particularly shaped patterns.* Two and three flute cutters. * 1/2" shanks.

    From: $17.99
  5. Rockler Undersized Plywood Router Bit Set

    Rockler Undersized Plywood Router Bit Set

    …result, regular size bits usually don't cut a tight-fitting dado. Fortunately, undersized dado bits like these will help your joinery fit perfectly, resulting in stronger assemblies and nearly invisible joint lines. This set includes the three most common sizes of straight bits for undersized…

    10 Review(s)
    $44.99
  6. Rockler 4-Pc. Straight Bit Set - 1/2" Shank

    Rockler 4-Pc. Straight Bit Set - 1/2" Shank

    …rabbets for your cabinetry and furniture with this four-piece boxed set of straight router bits. The set includes the most commonly used straight bits: 1/4", 3/8", 1/2" and 3/4", and comes in a convenient storage box. All bits are double flute, combining a smooth cut with efficient chip ejection.…

    5 Review(s)
    $59.99
  7. Rockler Undersized Straight Router Bits - 1/2" Shank

    Rockler Undersized Straight Router Bits - 1/2" Shank

    These straight bits are slightly undersized to cut tight-fitting grooves and dadoes for plywood that is thinner than its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut…

    21 Review(s)
    From: $14.49
  8. Freud® Double Flute Straight Router Bits - 1/4" Shank

    Freud® Double Flute Straight Router Bits - 1/4" Shank

    straight bits cut smoother than other bits because of the precise shear and hook angles.* End of bit relief allows for fast plunging.* Cuts all composite materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    From: $14.97
  9. Rockler Double Bearing Shear Flush Trim Router Bit - 3/4" Dia x 1-1/2" H x 1/2" Shank

    Rockler Double Bearing Shear Flush Trim Router Bit - 3/4" Dia x 1-1/2" H x 1/2" Shank

    …producing a smoother cut than traditional straight-fluted bits. The unique design also helps eliminate tear-out problems that occur when routing end-grain, cross-grain and figured grain on hardwoods. Dual bearings mounted at both top and bottom make this an extremely versatile template routing bit.

    13 Review(s)
    $42.99
  10. Powermatic TS29 Shaper, 7-1/2HP 3PH 230/460V with Sliding Table

    Powermatic TS29 Shaper, 7-1/2HP 3PH 230/460V with Sliding Table

    …Motor Voltage:230/460V* Net Weight:1100pound* Overall Dimensions:51 x 44 x 53* Part Number:1791284* Prewired:Prewired 230V* Reversable:Yes* Router Bit Collet Diameter (in.):1/4 and 1/2* Ship Weight:1280pound* Slide Table Size (in.):11-1/4 x 51-1/4* Spindle Diameter (in.):3/4, 1, and 1-1/4* Spindle…

    $8,675.99
  11. Fulcrum Pins for Rockler Router Table Plates

    Fulcrum Pins for Rockler Router Table Plates

    …these Router Table Fulcrum Pins function as stable guides when routing curved profiles without a fence. When routing inside curves, for example, it becomes impossible to use a straight fence for stability, so a guide pin is used. Fulcrum pins are most commonly used with bearing guided router bits,

    $4.49
  12. Bosch Colt™ Variable-Speed Palm Router Kit

    Bosch Colt™ Variable-Speed Palm Router Kit

    …base to base.* Convenient front spindle lock for fast, easy one-wrench bit changes.* Rubberized grip and unique finger support pockets provide additional support when trimming edges.* All-metal straight-edge guide directs router along edges of workpiece or up to 3-5/8" from edge.* Fast and precise…

    23 Review(s)
    $129.99
  13. Freud® Single Flute Straight Router Bits - 1/4" Shank

    Freud® Single Flute Straight Router Bits - 1/4" Shank

    …Single-Flute Straight Bits work well for general stock removal at fast feed rates. They're ideal for cutting narrow grooves and channels, such as those for drawer bottoms. The bits cut all composition materials, plywoods, hardwoods and softwoods. Use them on CNC and other automatic routers as well…

    From: $11.47
  14. Porter-Cable Panel Pilot Router Bit - 1/4" Dia x 25/32" H x 1/4" Shank

    Porter-Cable Panel Pilot Router Bit - 1/4" Dia x 25/32" H x 1/4" Shank

    This Porter Cable 1/4" Panel Pilot Bit is just the thing for cutting template designs, cutting openings for power outlets in drywall, paneling, siding, and a lot more! Use it on hardwoods, softwoods, plywood, MDF, aluminum sheeting, insulation and drywall. * Tipped with micrograin carbide.* Shank…

    $9.99
  15. Freud® Up-Spiral Router Bits - 1/4" Shank

    Freud® Up-Spiral Router Bits - 1/4" Shank

    …carbide up spiral bits combine effective chip removal with a cut that can’t be matched by standard straight bits. Ideal for production settings.* Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.* Use on CNC and other automatic routers as well as…

    From: $20.47
  16. Rockler Up-Cut Spiral Mortising Router Bits - 1/4" Shank

    Rockler Up-Cut Spiral Mortising Router Bits - 1/4" Shank

    Onsrud up-cut spiral router bits are perfect for cutting mortises. The up-cut design helps keep the mortise clear of chips and shavings while you cut. Available in high speed steel and solid carbide.

    6 Review(s)
    From: $17.99
  17. Rockler Undersized Straight Router Bits - 1/4" Shank

    Rockler Undersized Straight Router Bits - 1/4" Shank

    These straight bits are slightly undersized to cut tight-fitting grooves and dadoes for plywood that is thinner than its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut…

    21 Review(s)
    From: $13.99
  18. Traditional Inlay Banding

    Traditional Inlay Banding

    …Wood! 1/2" wide, 36" long, and approximately 1/20" thick. Easy to apply. Applying inlay banding is a very simple operation. Using a router with a straight cutter bit and guide, rout out a groove the desired width and just a shade shallower than the banding. Glue the banding into the groove. When the…

    3 Review(s)
    $18.99
  19. Freud® 91-100 13 Piece Super Router Bit Set - 1/2" Shank

    Freud® 91-100 13 Piece Super Router Bit Set - 1/2" Shank

    Straight Bit (12-100) – 1/4" x 3/4"* Double Flute Straight Bit (12-116) – 1/2" x 1"* Double Flute Straight Bit (12-152) – 3/4" x 1"* Mortising Bit (16-110) – 1/2" x 1/2"* Round Nose Bit (18-114) – 1/4" x 3/8"* V-Groove Bit (20-108) – 3/4" x 1/2"* Dovetail Bit

    2 Review(s)
    $220.47
  20. Freud® Double Compression Spiral Router Bits - 1/2" Shank

    Freud® Double Compression Spiral Router Bits - 1/2" Shank

    The Freud Double Compression Spiral Bit is the ultimate high-performance straight bit, specially designed to eliminate chipping on both sides of the workpiece. This makes it ideal for pattern routing on double-sided panels, edgework, mortises and more. Solid carbide. 1/2" shank. Application: Fine…

    1 Review(s)
    From: $81.97
  21. Freud® 91-103 5-Pc. Introductory Router Bit Set H 1/2" Shank

    Freud® 91-103 5-Pc. Introductory Router Bit Set H 1/2" Shank

    …well-used router bits in the shop, this 5-Piece Introductory Router Bit Set is sure to see plenty of use. The flush-trim bit is indispensable for flushing up face frames and shelf caps with their mating panels. Use the 1/4" straight bit for routing grooves and dadoes. The ogee and round over bits

    $98.97
  22. Freud® Down-Spiral Router Bits - 1/2" Shank

    Freud® Down-Spiral Router Bits - 1/2" Shank

    …and laminates. * Freud's solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. * Cuts all composition materials, plywoods, hardwoods, and softwoods. * Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    3 Review(s)
    From: $50.97
  23. Rockler Piloted Flush Trim Router Bits - 1/4" Shank

    Rockler Piloted Flush Trim Router Bits - 1/4" Shank

    …used for template work where the template is below the worked material or, alternatively, with a router mounted in a router table where the template is above the worked material. In both cases it is suitable for straight and particularly shaped patterns.* Two and three flute cutters. * 1/4" shanks.

    From: $15.99
  24. Onsrud Down-Cut Spiral Router Bits

    Onsrud Down-Cut Spiral Router Bits

    Down-spiral cutting action forces the chips down into the groove, eliminating the tendency for wood fibers to chip out the face. Double-flute design with HSS (high speed steel) construction for a smooth finish. * Recommended when chip flow should be directed down for a clean cut on top of the…

    From: $19.39
  • Items 1 - 24 of 113
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X