T Handle Clamp

  • Items 1 - 24 of 37
  • Page:
    1. 1
    2. 2
  1. Small T-Handle Clamp

    Small T-Handle Clamp

    Once attached to a bench or fixture, this clamp works great as a quick-action hold down for jigs or as a simple way to secure a work piece. Its holding capacity is approximately 200 pounds. * Bottom of rubber foot adjusts from 1/4" above mounting surface to 3/8" below mounting surface. Total length…

    1 Review(s)
    $16.99
  2. Axe Grinding Jig SVA-170 for Tormek T-7 Sharpening System

    Axe Grinding Jig SVA-170 for Tormek T-7 Sharpening System

    For carving and carpenter's axes. Maximum axe size 6-1/2". The jig comprises a clamp with a rubber lined, wedge shaped stop, which holds the axe in a fixed position towards the grindstone. The clamp works on the Universal Support, on which it slides across the stone. The jig is designed so that the…

    $19.00
  3. Quick-Set Heavy-Duty T-Handle Clamp

    Quick-Set Heavy-Duty T-Handle Clamp

    Perfect for holding workpieces and other stock in place! This clamp offers a 350-pound holding capacity and includes a 5/16-18 Quick-Set pressure adapter for fast and easy depth adjustments. Patented.* Arm length: 2"* Arm height: 13/16"* Base dimensions: 1-11/16" x 1-13/16"

    1 Review(s)
    $20.99
  4. Rockler Auto-Lock T-Track Clamp

    Rockler Auto-Lock T-Track Clamp

    …the clamp to your T-track* Bottom-mounted alignment pins can be repositioned at 45° for angled clamping* Adjustment screw is easily accessible through a hole in the handle, and adjusts clamping pressure from 10 to 500 lbs* Non-slip pad on base of clamp prevents unwanted shifting* Clamp face…

    1 Review(s)
    $29.99
  5. Rockler Sure-Foot Plus® 3/4'' Pipe Clamp

    Rockler Sure-Foot Plus® 3/4'' Pipe Clamp

    …table to allow for greater handle clearance, so you won't have to position clamp handle off the edge of a bench.* Clamping face includes holes for mounting pads, cauls, jigs and specialty fixtures.* Built-in clamp hook eliminates need to "clamp the clamp" when hanging on wall.* Four-clutch-plate…

    66 Review(s)
    $18.99
  6. All in One Clamp Guide Package, While Supplies Last!

    All in One Clamp Guide Package, While Supplies Last!

    …and flat top for bearing-guided routing applications* Integral clamping jaws and locking lever provide a quick, easy way of clamping the guide.* Features instant edge-to-edge clamping, low profile with no obstruction, extra long handle and 1-3/4" wide extrusion.* Built-in T-track on top of the guide…

    37 Review(s)
    $159.99
  7. BLOKKZ Universal Clamping Blocks, Pair

    BLOKKZ Universal Clamping Blocks, Pair

    …to handling virtually any miter, these easily clamp notoriously difficult joints, such as scarf joints, bevels and mortise and tenon joints where the tenon extends through the mortise. They're also perfect for clamping simple ninety degree joints on large assemblies when you don't have a clamp

    $24.99
  8. Rockler Sure-Foot® Aluminum Bar Clamps (4-Pack)

    Rockler Sure-Foot® Aluminum Bar Clamps (4-Pack)

    …for excellent handle clearance. All of the Sure-Foot® features in a lightweight bar clamp!* Includes two 48" Sure-Foot® Aluminum Bar Clamps and two 24" Sure-Foot® Aluminum Bar Clamps* Won't rap your knuckles with these clamps' higher base for greater clearance.* Built-in clamp hook locks…

    1 Review(s)
    $129.99 $69.99

    SAVE 46%

  9. Magswitch T-Handle Magnetic Workholding Square

    Magswitch T-Handle Magnetic Workholding Square

    Super-strong magnet provides a versatile hold-down without interfering in your work space. Great for reinforcing a fence anywhere on a steel table!* 90° corners for squaring.* Switches in and out of fixtures with ease.* Does not included Resaw Guide shown Magsquares allow for the attachment of…

    2 Review(s)
    $62.99
  10. Kreg Large Face Clamp, with Soft Grip Handles

    Kreg Large Face Clamp, with Soft Grip Handles

    Now with soft-grip handles for more comfortable operation! This clamp is the ideal size for pocket hole joinery on larger work pieces. A large clamping pad ensures perfectly flush joint lines and won't damage your wood. Without a clamp like this, the joint can sometimes misalign if the screw follows…

    $29.99
  11. Bosch JS470E 7.0A D-Handle Jigsaw

    Bosch JS470E 7.0A D-Handle Jigsaw

    …wrench.* Exclusive multi-directional blade clamp provides superior grip of T-shank blades (does not accept U-Shank blades).* Four orbital-action settings for smooth to aggressive cuts.* Adjustable dust blower keeps cutting line clear.* Ergonomic top handle with soft-grip areas for solid, comfortable…

    $159.00
  12. Bosch JS572EL 7.2A D-Handle Jigsaw

    Bosch JS572EL 7.2A D-Handle Jigsaw

    …operating speed.* Constant Response Circuitry maintains desired speed for consistent performance under load.* Exclusive multi-directional blade clamp provides superior grip of T-shank blades (does not accept U-Shank blades).* Aluminum gearbox with insulated cover.* Toolless blade-change system…

    $299.00
  13. Gorilla Gripper Plywood Carrier

    Gorilla Gripper Plywood Carrier

    …the Gorilla Gripper clamps onto the top edge of the sheet, eliminating any bending or stooping, and allowing you to carry most sheet sizes with your hand comfortably locked in place over your shoulder. Simply slip it on, lift, and the Gorilla Gripper automatically clamps onto any stock from 0"-3/4".…

    6 Review(s)
    $52.49
  14. 3-1/4'' to 8'' Extendable Aluminum C-Clamp

    3-1/4'' to 8'' Extendable Aluminum C-Clamp

    …in record time. Not only that, but its clamping range can be extended just as quickly with a second quick-release lever mounted on the bar. If you need extra heavy clamping power, simply pull the handle down and rotate it 90° for more leverage. The clamp is sturdily built with aluminum jaws that…

    1 Review(s)
    $19.99
  15. Festool RS 2 E Orbital Sander with New T-Loc Systainer

    Festool RS 2 E Orbital Sander with New T-Loc Systainer

    …completely painless; the lever-actuated spring clamps lock open so you don't have to fumble with two things at once. You can even use the optional Hole Punch (70828) to form all 10 dust collection holes with a single push! Two comfortable handles offer more control and less fatigue, while variable…

    $395.00
  16. All-In-One Low-Profile Contractor Clamps, New & Improved!

    All-In-One Low-Profile Contractor Clamps, New & Improved!

    New and Improved! Now with lower profile and wider jaw for more stability! Wide lever handles and a click-lock sliding jaw make it simple to position and secure these clamps for use as a straight edge guide for circular saws and routers and as a fence for your table saw or drill press. A very low…

    89 Review(s)
    From: $41.99
  17. Bosch MRF23EVS Fixed Base Router, 2.3 HP

    Bosch MRF23EVS Fixed Base Router, 2.3 HP

    …Wrench, Three M4 Screws for Table Mounting. Features:* Trigger Control System: Trigger power switch (with lock-on button) conveniently located in handle for enhanced control* Afterlock Microfine Depth Adjustment: Easy and precise adjustment at any plunge setting* Smooth Plunge Action, Spring-Lock…

    $242.99
  18. Festool MFK 700 EQ Set Trim Router with New T-Loc Systainer

    Festool MFK 700 EQ Set Trim Router with New T-Loc Systainer

    handle any edge or corner application, rout grooves straight away, and much more. Change from vertical to horizontal routing in seconds, and attach and remove every component of the MFK without a single tool. Both bases feature a large, stable bearing surface and ergonomically designed guide handles

    $525.00
  19. Festool TS 75 EQ Plunge Cut Saw with New T-Loc Systainer

    Festool TS 75 EQ Plunge Cut Saw with New T-Loc Systainer

    …indicator and built in scale.* Lightweight cast aluminum magnesium base.* Full-length channel beneath the guide rail accepts clamps for obstruction-free clamping. Clamps sold separately in the Festool FS/2 Guide Rail Accessory Kit (71458). Includes:* 75" guide rail* 8-1/4" 36-tooth carbide blade*…

    $725.00
  20. Bosch MRC23EVSK Modular Router, 2.3 HP

    Bosch MRC23EVSK Modular Router, 2.3 HP

    …Screws for Table Mounting, Combo Kit Case. Features:* Trigger Control System: Trigger power switch (with lock-on button) conveniently located in handle for enhanced control* Afterlock Microfine Depth Adjustment: Easy and precise adjustment at any plunge setting* Smooth Plunge Action, Spring-Lock…

    2 Review(s)
    $321.99
  21. Trim Clip Miter Clip

    Trim Clip Miter Clip

    …miter clamp firmly shut, while the notch keeps the tips of the miters neatly aligned. Once clamped, you can also rotate the clamp handle up and out of the way, providing access so you can nail the miter and move on to the next corner. The metal spurs hold the wood firmly and allow the clamp to be…

    1 Review(s)
    $16.99
  22. Powermatic® Tilt Table Mortiser w/Stand

    Powermatic® Tilt Table Mortiser w/Stand

    …adjustable gibs to assure years of trouble-free service. The heavy rack and pinion gear system utilizes a spring-loaded six position adjustable handle for movement. A handy depth stop gives a uniform depth of mortise. A large 20-1/4" x 7" table gives plenty of work support and will adjust to any…

    1 Review(s)
    $1,274.99
  23. Kreg Jig® K5 Pocket Hole System

    Kreg Jig® K5 Pocket Hole System

    …portable use, and you have, quite simply, the most advanced Kreg Jig® yet * Front-mounted clamp handle makes clamping easy - no need to reach around the workpiece to close the clamp.* Ratcheting clamp mechanism adjusts without tools.* Quick-release pin holds drill block in place, and can't get…

    1 Review(s)
    $139.00
  24. Tormek® Small Knife Sharpening Jig

    Tormek® Small Knife Sharpening Jig

    …designed to securely hold the knife without damaging the handle.* The Tormek® Small Knife Sharpening Jig consists of a guide bar, a handle grip, and an adjustable clamp. The knife handle is fastened with a knob on the adjustable clamp.* The guide bar mounts in the jaws of the Tormek Knife Jig…

    $33.00
  • Items 1 - 24 of 37
  • Page:
    1. 1
    2. 2
Feedback X