T Slide

  • Items 1 - 24 of 107
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler T-Track Intersection Kit

    Rockler T-Track Intersection Kit

    Slide your jigs and fixtures in almost any direction!* Used with our 3/4" wide aluminum T-track, this 4-piece kit allows you to make the T-track intersection you need.* Includes four pieces and mounting hardware - enough to make one intersection.* Stop blocks and hold-downs can be used almost…

    2 Review(s)
    $21.99
  2. Rockler 36'' Miter Track

    Rockler 36'' Miter Track

    Set up your jigs, fixtures and shop-made router tables to accept a smooth-sliding miter gauge. This 36" miter track is constructed of 100% aluminum for excellent durability without the weight. The track fits into a 1" x 1/2" deep dado, and accepts a standard 3/4" x 3/8" miter bar. For fast,…

    $17.99
  3. Digital Sliding T-Bevel Gauge

    Digital Sliding T-Bevel Gauge

    Take the guesswork out of angle measurement and duplication with this 2-in-1 Digital Sliding T-Bevel and Protractor! Features a large digital angle readout that gives you precise 360° measurements with an accuracy to 0.3° and .05° resolution and holds them while you transfer to stock.…

    5 Review(s)
    $36.99 $24.99

    SAVE 32%

  4. Bench Cookie Plus® T-Track Kit

    Bench Cookie Plus® T-Track Kit

    …and Bench Cookies® for their versatility - now this complete kit allows you to combine the two for the ultimate in both! T-Track Risers slide conveniently into your T-track to provide a set of four elevated posts for your Bench Cookie® Plus Work Grippers. Not only do you get a no-slip,…

    $54.97
  5. FastCap RocLoc Drywall Anchors with Screws

    FastCap RocLoc Drywall Anchors with Screws

    …quickly and easily in 1/2" drywall, each anchor supporting up to 150 pounds. The RocLoc anchor resists shear stress and will not allow the load to slide. Just drill a 1/2" hole, push the anchor into place and use the included Powerhead screw to fasten your item to the wall. Pack of 10 anchors with…

    $8.39
  6. Rev-A-Shelf Filler Pullout Organizer w/Stainless Steel Panel for Base Cabinets (434-BF Series)-Filler Pullout Organizers for Base Cabinets

    Rev-A-Shelf Filler Pullout Organizer w/Stainless Steel Panel for Base Cabinets (434-BF Series)-Filler Pullout Organizers for Base Cabinets

    …decorative fillers into storage pullouts! The 434-BF Series is available for base cabinet applications and features full-extension ball bearing slides, black accessory hooks, pegs, and a magnetic grade stainless steel panel that provides endless storage customization for storing pots and pans,…

    From: $189.99
  7. Rockler Bench Cookie Plus® 2'' T-Track Risers, 4-Pack

    Rockler Bench Cookie Plus® 2'' T-Track Risers, 4-Pack

    …and Bench Cookies® for their versatility - now this simple kit allows you to combine the two for the ultimate in both! T-Track Risers slide conveniently into your T-track to provide a set of four elevated posts for your Bench Cookie® Plus Work Grippers (sold separately, 46902).…

    $10.49
  8. iGaging 9'' Ebony Sliding T-Bevel

    iGaging 9'' Ebony Sliding T-Bevel

    The sliding t-bevel is the tool of choice for transferring angles and laying out dovetails and angled joinery. This model is offered with a beautiful ebony handle and solid brass wear strips for durability and a stable reference surface. 9" blade pivots and slides, and is locked in place with a…

    $37.99
  9. False Front Hinged Slides

    False Front Hinged Slides

    …separately below) appears.* The slides are 14" long with a 10-1/2" extension.* Requires 1/2" side space per side.* 75 lb. load rating.* Black Epoxy Coated Steel.* Nylon Roller Bearings.* Hinge on front of slide is 1-5/8" high x 5/8" wide* Hold-out stop keeps slides in position when extended for a…

    20 Review(s)
    $12.19
  10. 10'' Sliding T-Bevel Square

    10'' Sliding T-Bevel Square

    Metal blade pivots and can be locked at any angle.

    $20.99
  11. Custom-Fit Slide Glides

    Custom-Fit Slide Glides

    Economical and versatile, these adjustable slide glides are designed for use with cabinet drawer openings that have a center, T-shaped guide rail. The set consists of one adjustable center-mount plastic backplate and two L-shaped nail-on glides for drawer edges. Backplate adjusts to fit guide rails…

    8 Review(s)
    $4.59
  12. Slide Mounting Screws

    Slide Mounting Screws

    Slide mounting screws for attaching ball bearing slides and catches (roller and magnetic) have low profile heads that won't interfere with guide operation.* Thread design gives you substantial holding power in the mating material.* #2 Square-X drive.* Can also be used to attach brackets, shelf…

    4 Review(s)
    $5.19
  13. Slipit© Sliding Compound

    Slipit© Sliding Compound

    Slipit© reduces friction on moving wood and metal parts. Use this specially formulated, silicone-free lubricant for wooden windows, doors, drawers and any other wood-on-wood application. Slipit© won't gum up or cause pieces to jam, and won't harm finished wood surfaces or skin. Applies…

    17 Review(s)
    $17.99
  14. Salice Futura Push-to-Open Drawer Slides

    Salice Futura Push-to-Open Drawer Slides

    …drawer. Recess range is 3/8" to 9/16".* Length of drawer slide should equal the length of the drawer box.* To find the minimum cabinet depth, add 7/8" to the length of the slide.* To find maximum cabinet depth (relevant only when using rear mounting brackets), add 2-1/2" to the length of the slide.

    2 Review(s)
    From: $29.99
  15. Metal Drawer Slides and Sides

    Metal Drawer Slides and Sides

    Heavy-gauge epoxy drawer slides are incorporated with white epoxy-coated steel drawer sides to let you make drawers like a pro! All you have to do is make the bottom, front and back and install. Thin drawer side material gives you more space; plus, it won't warp or split. Sides also have ready-made…

    7 Review(s)
    $30.99
  16. Powermatic TS29 Shaper, 7-1/2HP 3PH 230/460V with Sliding Table

    Powermatic TS29 Shaper, 7-1/2HP 3PH 230/460V with Sliding Table

    …insuring long, trouble-free performance. Powered by a big 7-1/2HP motor that drives the spindle forward and reverse with five speeds. The massive sliding table is fully supported by six tapered precision bearings through a full four-foot stroke. In addition, on board the table is a large miter head…

    $8,675.99
  17. Hafele SmartCab™ Base Cabinet Pull-Out With Soft-Close Slides

    Hafele SmartCab™ Base Cabinet Pull-Out With Soft-Close Slides

    The Hafele SmartCab™ is a multi-purpose, pull-out storage unit mounted on a pair of silky-smooth, full-extension soft-close slides that provide easy access to items at the back of the cabinet. The basic unit includes a full-depth shelf and a half-depth shelf plus vertical divider for two basic…

    $219.99
  18. Festool Kapex KS 120 EB Sliding Compound Miter Saw

    Festool Kapex KS 120 EB Sliding Compound Miter Saw

    …and lightweight design, remarkable dust collection capability and a seemingly endless list of premium features, the Kapex is the most advanced sliding compound miter saw on the market today. It weighs only 47 lbs. and features a unique rail-forward design, allowing for easy transportation and…

    6 Review(s)
    $1,400.00
  19. Laguna Tools Platinum Series Universal Sliding Table System

    Laguna Tools Platinum Series Universal Sliding Table System

    …the Platinum Series Universal Sliding Table, a sliding table attachment that converts virtually any cabinet style table sawto give you the cutting capacity of a small panel saw!* Designed for easy installation* Uses the same bearing mechanism on professional sliding table panel saws* Can crosscut…

    $695.00
  20. Hafele Synergy Slide-Out Tie-Racks

    Hafele Synergy Slide-Out Tie-Racks

    Tie collection tied up in knots? This Slide-Out Tie Rack from Hafele will smooth things out once and for all. 3/4 extension slide provides easy access, even if it directly abuts other storage areas such as hanging space. And with room for up to 20 ties, you won't have to sacrifice selection for the…

    $29.99
  21. Hafele Synergy Slide-Out Belt Racks

    Hafele Synergy Slide-Out Belt Racks

    This Slide-Out Belt Rack from Hafele tucks your belt collection into a narrow space, yet provides easy access with the 3/4 extension slide. With hooks for six belts, plus plenty of room for stacking, you won't have to sacrifice selection for the sake of order. Choose from three finishes to match…

    $29.99
  22. Rockler Auto-Lock T-Track Clamp

    Rockler Auto-Lock T-Track Clamp

    Tightening Rockler's new Auto-Lock T-Track Clamp is literally an open-and-shut case—just slide the clamp face up to your work and close the lever! Once set, the clamping pressure is always the same regardless of workpiece size, and is adjusted only if needed with the set screw. Since the…

    1 Review(s)
    $29.99
  23. T-Jak™ Support System

    T-Jak™ Support System

    …tub surrounds and many other applications. Ingenious quick-release knob allows you to adjust for proper height in seconds. Simply tilt the knob, slide the shaft to the desired height and it will automatically lock in place. Fine-tune your adjustment by simply turning the knob.* Supports up to 400…

    5 Review(s)
    From: $99.99
  24. Slide-Out PC Holder

    Slide-Out PC Holder

    This sliding computer mount keeps your computer out of the way when you don't need it, yet slides out and swivels for easy access when you need to plug in new accessories or upgrades. No more crawling under your desk! Heavy duty construction. Free up valuable desktop space by mounting your CPU…

    3 Review(s)
    $60.99
  • Items 1 - 24 of 107
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X