T Slot Clamp

  • Items 1 - 24 of 25
  • Page:
    1. 1
    2. 2
  1. Toggle Clamp Mounting Plate

    Toggle Clamp Mounting Plate

    …to get the most out of your toggle clamps and any workbenches, tables, jigs or surfaces with T-tracks. It's a great way to add a hold-down to fences with top-mounted T-tracks. The steel plate features adjustable slots to accommodate a wide variety of toggle clamps and comes complete with mounting…

    2 Review(s)
    $7.99
  2. Universal T-Track

    Universal T-Track

    …Deep.* T-tracks feature pre-drilled mounting holes in base.* Holes are 4" on center, 2" from each end.* Made of extruded aluminum.* Mounting screws not included. For added versatility and functionality, combine T-Tracks with 5-1/2"L x 1-1/8"W Hold Down Clamps and 3-1/2"L x 3/4"W Hold Down Clamps.

    19 Review(s)
    From: $14.99
  3. Rockler 17-Piece Universal T-Track Kit

    Rockler 17-Piece Universal T-Track Kit

    …Two 1" x 5/16" T-bolts* Two 1-1/2" x 5/16" T-bolts* Two 2-1/2" x 5/16" T-bolts* Four T-knobs* Four 5-star knobs Additional lengths of track are sold separately. For added versatility and functionality, combine T-Tracks with 5-1/2"L x 1-1/8"W Hold Down Clamps and 3-1/2"L x 3/4"W Hold Down Clamps.

    45 Review(s)
    $31.99
  4. Portable Tablet Mount for Tables - by Upper Desk™

    Portable Tablet Mount for Tables - by Upper Desk™

    …place to place with ease using the fast-action mounting clamp. And unlike freestanding units, it won't take up counter space. The mount can be pivoted up to 180°, the height easily adjusted, and your tablet positioned in three tilt slots to provide the best viewing angle from multiple positions,…

    $59.95
  5. Incra Build-It System Components

    Incra Build-It System Components

    …to deluxe crosscut, miter and coping sleds. It's perfect for expensive specialty items like tenoning jigs. Unlike conventional jigs, you can add features or redesign at any time. Right Angle Brackets, Clamp and Knobs all work seamlessly with the T-slot for easy assembly and quick adjustability.

    2 Review(s)
    From: $10.99
  6. Portable Tablet Mount for Cabinets - by Upper Desk™

    Portable Tablet Mount for Cabinets - by Upper Desk™

    …place to place with ease using the fast-action mounting clamp. And unlike freestanding units, it won't take up counter space. The mount can be pivoted up to 180°, the height easily adjusted, and your tablet positioned in three tilt slots to provide the best viewing angle from multiple positions,…

    $59.95
  7. Micro Jig ZeroPlay® Stop ZP9-S1

    Micro Jig ZeroPlay® Stop ZP9-S1

    More than just a miter stop! Small and versatile, this stop can also lock a jig in place or serve as a lock to secure a hold-down clamp (not included) in the miter slot. Fits standard 3/4" x 3/8" T-Style miter slots.

    $7.39
  8. Kreg™ Heavy Duty Bench Klamp System

    Kreg™ Heavy Duty Bench Klamp System

    …your work surface, simply mount the powerful clamp into the plate's keyed slot. When you're done, just remove the clamp to work unobstructed. * Includes 10" x 10" x 1/4" thick steel plate and bench clamp that easily attaches to the plate.* Rotating clamp has 3-1/2" reach for all your pocket hole…

    6 Review(s)
    $59.99
  9. Incra Build It Starter Kit

    Incra Build It Starter Kit

    …Shooter Board Squaring Jig* Tenoning Jig Features:* (1) Large Build-It Panel* (1) Small Build-It Panel* (2) 18" T-Slot Panel Connector* (1) 18" Miter Slider* (1) Build-It Clamp* (1) pr. Build-It Brackets* (1) set of 8 Build-It Knobs* (1) 18" T-Track Regular* (1) 18" T-Track Plus* (5) Free Jig Plans

    2 Review(s)
    $146.99
  10. Bench Cookie Plus® T-Track Kit

    Bench Cookie Plus® T-Track Kit

    …Grippers!* Newly redesigned, these high-friction rubber pads hold your project rock-steady while sawing, sanding, or routing without the use of clamps.* New design features a 3/4" insert for various riser systems Bench Cookie Plus® 2" T-Track Risers:* Simply spin the Bench Cookies onto the…

    $54.97
  11. Rockler T-Track Table Top

    Rockler T-Track Table Top

    …T-Track Hold Downs, or with our Bench Cookie Work Grippers and the Bench Cookie T-Track Risers (46311). You can also use it with toggle clamps mounted on our Toggle Clamp Mounting Plates (24872). The spacious top measures 28" x 40", larger than most comparable tables. Mount it on a shop-built base,…

    1 Review(s)
    $229.99 $199.99

    SAVE 13%

  12. Incra Miter Express Miter Sled

    Incra Miter Express Miter Sled

    …extra holding power of the included hold-down clamps - adds stability and control.* Incra hold-down clamp keeps your fingers away from the blade when cutting small workpieces.* Includes outboard fence support that locks behind your fence in T- slot to provide even more rigidity for all operations.*…

    2 Review(s)
    $159.99
  13. CNC Shark HD Version 2.0 Routing System

    CNC Shark HD Version 2.0 Routing System

    …keypad).* NEW Redesigned Extended Aluminum T slot top (27" x 36") for versatile clamping, less flex and greater accuracy.* USB interface.* Download free project plans from Vectric* Also includes: 3/8" dia. V-groove Bit and two hold-down clamps!* Mount for Router included (Router sold separately).*…

    3 Review(s)
    $3,999.99
  14. Drill Press Fence Clamp

    Drill Press Fence Clamp

    All the components for a hold-down clamp that can be positioned along a T-slot or T-track in the fence of your drill press table. Each clamp comes with screws for mounting plus one mounting block, one 5/16" x 1" T-Bolt and one 1" Round 5/16"-18 Through Hole Knob.

    $18.99
  15. 36" Universal Track for Magswitch Workholding System

    36" Universal Track for Magswitch Workholding System

    …mounting hardware! One side accepts all standard T-bolts and all 1/4" hex. The other side accepts all standard T-bolts, all 5/16" hex and Kreg® clamps.* Includes micro-adjustable brackets for fine tuning to 90 degrees.* Features core advantages of Magswitch, including fast, strong setup anywhere…

    $65.99
  16. Rockler Quick-Release Bar Clamp Rack

    Rockler Quick-Release Bar Clamp Rack

    …Pre-drilled 16" on center for mounting to wall studs.* Also pre-drilled to mount to the Pack Rack Clamp and Tool Storage System (21834, sold separately).* 24-3/8" long.* Spacers between clamp slots measure 1.33" wide.* Clamp storage slots measure 0.3" wide.* Accepts most quick-release bar clamps.

    1 Review(s)
    $15.99
  17. Powermatic TS29 Shaper, 7-1/2HP 3PH 230/460V with Sliding Table

    Powermatic TS29 Shaper, 7-1/2HP 3PH 230/460V with Sliding Table

    …six tapered precision bearings through a full four-foot stroke. In addition, on board the table is a large miter head complete with stock hold-down clamp and a 56" miter fence with flip stop. The large table can easily accommodate a stock feeder for longer production runs.* Sliding table with 4-foot…

    $8,675.99
  18. 18" Universal Track for Magswitch Workholding System

    18" Universal Track for Magswitch Workholding System

    …mounting hardware! One side accepts all standard T-bolts and all 1/4" hex. The other side accepts all standard T-bolts, all 5/16" hex and Kreg® clamps.* Includes micro-adjustable brackets for fine tuning to 90 degrees.* Features core advantages of Magswitch, including fast, strong setup anywhere…

    $32.49
  19. Jet® 17'' Floor Mount Drill Press

    Jet® 17'' Floor Mount Drill Press

    …* Innovative extra large 14" x 18" work table features twin T-slot grooves for miter gauge or homemade jigs, table has lip designed edge for easy clamping of workpiece and a removable insert * Hinged metal belt and pulley cover provides easy access to the quick adjustment motor mount to allow rapid…

    1 Review(s)
    $609.99
  20. Guide Rail Clamps for Festool Guide Rails

    Guide Rail Clamps for Festool Guide Rails

    Designed as key system components to the Festool MFT and Guide Rail systems, Festool Screw Clamps secure your workpiece for precision cutting, sanding, routing, sanding, or just about any other application. Designed to work seamlessly with holes and channels on the the Festool MFT Multifunction…

    From: $42.00
  21. Kapex Crown Stop with Base Extension

    Kapex Crown Stop with Base Extension

    …Extension supports nested workpieces at any angle, and provides enhanced material support to the left or right of the saw. Integrated t-slots enable additional clamping capability, expanding the use of job-specific jigs when used with Festool FS clamps. Includes 1 base extension and 1 crown stop.

    $99.00
  22. Mounting Bracket for Auto-Lock T-Track Clamp

    Mounting Bracket for Auto-Lock T-Track Clamp

    …Rockler Auto-Lock T-Track Clamps (58616, sold separately)* Solid extruded aluminum* Four pre-drilled holes for easy mounting* Flange on one end provides a surface for the base-mounted rubber pad of the Auto-Lock Clamp to rest on, eliminating slippage* Universal T-track slot accepts 5/16" T-bolts,…

    $9.99
  23. Additional Insert Plate for Kreg Bench Clamp, 3" x 4" x 1/4"

    Additional Insert Plate for Kreg Bench Clamp, 3" x 4" x 1/4"

    …your work surface, simply mount the powerful clamp into the plate's keyed slot. When you're done, just remove the clamp to work unobstructed.* Includes 10" x 10" x 1/4" thick steel plate and bench clamp that easily attaches to the plate.* Rotating clamp has 3-1/2" reach for all your pocket hole…

    $12.99
  24. Nova Chuck Spur Center

    Nova Chuck Spur Center

    …the chuck for spindle work. Just clamp the Spur Center into your chuck, and you're ready to go. It's a rugged, 4-pronged spur drive with a square shank that fits snugly into your Nova chuck jaws. Inward and outward creep is totally eliminated, as the shank is slotted to allow the chuck jaws to close…

    $19.99
  • Items 1 - 24 of 25
  • Page:
    1. 1
    2. 2
Feedback X