T Slot Router Bits

  • Grid List
  • Page:
    1. 1
  • Items 1 - 24 of 24
  • Page:
    1. 1
  1. Rockler T-Slot Cutter Router Bit - 5/8" Dia x 3/16" H x 1/2" Shank

    Rockler T-Slot Cutter Router Bit - 5/8" Dia x 3/16" H x 1/2" Shank

    T-Slots allow jigs to be moved to any position needed on the track. Cuts slots to fit standard T-Slot Bolts. Instructions:* First cut a 3/8'' groove with a router bit or dado blade.* Repeat the cut with the T-slot bit. Note: This bit does not cut Universal T-Tracks or slotwalls. 3/8" Between Cutter…

    18 Review(s)
    $29.99
  2. T-Slot Bolts-5/16" - 18 Thread T-Slot Bolts

    T-Slot Bolts-5/16" - 18 Thread T-Slot Bolts

    …T-slot Router Bit (Rockler #26099). Lengths range from 1" to 3-1/2" (see below for selection). Technical Details:* Zinc plated steel* 5/16" x 18 TPI threading* Lengths from 1" to 3-1/2"* Foot measures 9/16" wide x 7/8" long x 7/64" thick Best Used With: Universal T-Tracks T-slot Router Bit (Rockler…

    9 Review(s)
    From: $1.19
  3. Freud® 52-522 T-Slotting Cutter Router Bit - 1-1/8" Dia x 13/16" H x 1/2" Shank

    Freud® 52-522 T-Slotting Cutter Router Bit - 1-1/8" Dia x 13/16" H x 1/2" Shank

    Build your own sturdy, attractive, slotted wall to display items from garden tools and power tools to toys — hanging by a hook. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    $48.47
  4. Rockler T-Slotwall Cutter Router Bit - 1-1/16" Dia x 13/16" H x 1/2" Shank

    Rockler T-Slotwall Cutter Router Bit - 1-1/16" Dia x 13/16" H x 1/2" Shank

    …This bit hogs out the slots so you can keep your tools visible and within easy reach. It allows you to reuse scrap wood or left over panels as shop storage. Note: Not intended to create T-slots for jigs. If that is your goal, use bit 26099.* Carbide-tipped bit cuts 5/16" x 1-1/16" slot with 3/8"…

    7 Review(s)
    $34.99
  5. Bench Cookie Plus® T-Track Kit

    Bench Cookie Plus® T-Track Kit

    …Not only do you get a no-slip, no-mar work surface that is fixed firmly in place, but the additional height creates space for saw blades and router bits beneath the workpiece. Simply spin the Bench Cookies and they tighten themselves down, then add a final cinch for good measure. Bench Cookie…

    $54.97
  6. CNC Shark HD Version 2.0 Routing System

    CNC Shark HD Version 2.0 Routing System

    …NEW Redesigned Extended Aluminum T slot top (27" x 36") for versatile clamping, less flex and greater accuracy.* USB interface.* Download free project plans from Vectric* Also includes: 3/8" dia. V-groove Bit and two hold-down clamps!* Mount for Router included (Router sold separately).* Z travel up…

    3 Review(s)
    $3,999.99
  7. Rockler Flooring Nail Slot Router Bit Set - 15/16" Dia x 3/4" H x 1/2" Shank

    Rockler Flooring Nail Slot Router Bit Set - 15/16" Dia x 3/4" H x 1/2" Shank

    …milling some boards to patch or add to an existing floor, or you want more control over the color match and strip width of a new floor, our flooring bit set is the perfect candidate. The cutters are specially designed for flooring, and feature chamfered edges along the tongue and along the bottom…

    $109.99
  8. Powermatic® Shaper 5HP 1PH w/Digital Readout & Casters

    Powermatic® Shaper 5HP 1PH w/Digital Readout & Casters

    …changes. The extruded aluminum fence has several T-slots so you can mount a wood face to create a no-clearance surface around any shaper or router bit. The fence also gives you the ability to quickly move the fence close to its final position, lock it in and then use the precision micro adjustments…

    $3,879.99
  9. Powermatic® Shaper 3HP 1PH w/Digital Readout & Casters

    Powermatic® Shaper 3HP 1PH w/Digital Readout & Casters

    …changes. The extruded aluminum fence has several T-slots so you can mount a wood face to create a no-clearance surface around any shaper or router bit. The fence also gives you the ability to quickly move the fence close to its final position, lock it in and then use the precision micro adjustments…

    $3,674.99
  10. Freud® Slot Cutter Arbors

    Freud® Slot Cutter Arbors

    …portable routers. * Each arbor is computer-balanced and precision-ground.* For premium performance use with Freud slotting cutters (e.g. 39518, sold separately), although the arbors are compatible with any slotting cutter with a 5/16" bore.* Use on hand-held and table-mounted portable routers.

    $7.97
  11. Powermatic TS29 Shaper, 7-1/2HP 3PH 230/460V with Sliding Table

    Powermatic TS29 Shaper, 7-1/2HP 3PH 230/460V with Sliding Table

    …Motor Voltage:230/460V* Net Weight:1100pound* Overall Dimensions:51 x 44 x 53* Part Number:1791284* Prewired:Prewired 230V* Reversable:Yes* Router Bit Collet Diameter (in.):1/4 and 1/2* Ship Weight:1280pound* Slide Table Size (in.):11-1/4 x 51-1/4* Spindle Diameter (in.):3/4, 1, and 1-1/4* Spindle…

    $8,675.99
  12. Rockler Pro Phenolic Router Table, Fence & Plate

    Rockler Pro Phenolic Router Table, Fence & Plate

    …points.* Ergonomic T-knobs for easy fence adjustment.* Includes bit safety guard for safe routing.* Includes Rockler Pro Fence with extruded aluminum backer for straight, accurate cuts.* Large opening in fence for big router bits.* Aluminum fence backer features front- and rear-mounted universal…

    2 Review(s)
    $399.99 $299.99

    SAVE 25%

  13. CNC Shark Pro Plus

    CNC Shark Pro Plus

    …fully compatible with the Bosch Colt Palm Router and includes a 3/8" diameter V-groove router bit. The CNC Shark also includes VCarve Pro 7 and Cut3D design software a $900 value. You supply a PC computer with USB 2.0 port and a Bosch Colt router (router sold separately). Simply connect the USB…

    15 Review(s)
    $3,799.99
  14. Bench Dog® Cast Iron Router Table, Pro Fence & Pro Router Lift

    Bench Dog® Cast Iron Router Table, Pro Fence & Pro Router Lift

    …a secure, flush interface with the included Bench Dog ProLift Router Lift. Plus, you get the 32" ProFence, a precision-milled aluminum fence with two MDF sub-fences, front and rear T-tracks, a 2-1/2" dust port and an integrated bit guard. If you're after the ultimate table top - the pinnacle of…

    $899.99
  15. Rockler Pro Phenolic Router Table, Fence, & FX Router Lift

    Rockler Pro Phenolic Router Table, Fence, & FX Router Lift

    …dent, scratch or delaminate. The whiter, brighter finish enhances visibility, while the included Router Lift FX allows effortless above-table adjustments and bit changes. 3/4" T-profile miter slot allows you to use precision aftermarket miter gauges, while universal T-tracks in both the fence and…

    $549.99
  16. Rockler High Pressure Laminate Router Table, Fence, Stand, & FX Router Lift

    Rockler High Pressure Laminate Router Table, Fence, Stand, & FX Router Lift

    …Pressure Laminate Router Tables are newly redesigned with a dual-track miter slot in the table and an included dust port. Plus, these packages include a steel stand, and our acclaimed Router Lift FX for above-table adjustments and bit changes! New 3/4" T-profile miter slot allows you to use…

    0 Review(s)
    $499.99
  17. Rockler Pro Phenolic Router Table, Fence, Plate & Stand

    Rockler Pro Phenolic Router Table, Fence, Plate & Stand

    …area.* Ergonomic T-knobs for easy fence adjustment.* Includes bit safety guard for safe routing.* Includes Rockler Pro Fence with extruded aluminum backer for straight, accurate cuts.* Large opening in fence for big router bits.* Aluminum fence backer features front- and rear-mounted universal…

    $499.99 $399.99

    SAVE 20%

  18. Pro Phenolic Router Table, Fence, Stand, & FX Router Lift

    Pro Phenolic Router Table, Fence, Stand, & FX Router Lift

    …whiter, brighter finish enhances visibility. These packages include our Steel Stand and the acclaimed Router Lift FX for effortless above-table adjustments and bit changes. 3/4" T-profile miter slot allows you to use precision aftermarket miter gauges, while universal T-tracks in both the fence and…

    1 Review(s)
    $649.99
  19. Jet® Shaper with 1/2'' & 3/4'' Spindles

    Jet® Shaper with 1/2'' & 3/4'' Spindles

    …pieces * Four adjustable work hold-downs to secure your work while shaping * 1/2" and 3/4" interchangeable spindles and router bit collets for use with shaper cutter and router bits Product Specifications:* Jet Part Number: 708322* Model Number: JWS-25CS* Brand: Jet* Height: 40"* Width: 29"* Length:…

    0 Review(s)
    $2,024.00
  20. Powermatic® Shaper 5HP 3PH w/Digital Readout & Casters

    Powermatic® Shaper 5HP 3PH w/Digital Readout & Casters

    …changes. The extruded aluminum fence has several T-slots so you can mount a wood face to create a no-clearance surface around any shaper or router bit. The fence also gives you the ability to quickly move the fence close to its final position, lock it in and then use the precision micro adjustments…

    $3,879.99
  21. Rockler High Pressure Laminate Router Table, Fence, & FX Router Lift

    Rockler High Pressure Laminate Router Table, Fence, & FX Router Lift

    Our High Pressure Laminate Router Tables are newly redesigned with a dual-track miter slot in the table and an included dust port. Plus, these packages include our acclaimed Router Lift FX for above-table adjustments and bit changes! New 3/4" T-profile miter slot allows you to use precision…

    $399.99
  22. Bench Dog® Cast Iron Router Table, Pro Router Lift, Pro Fence, & Steel Cabinet

    Bench Dog® Cast Iron Router Table, Pro Router Lift, Pro Fence, & Steel Cabinet

    …Dog ProLift Router Lift. ProLift is compatible with Porter-Cable 7518 & 7519; adapters for other routers available separately. Plus, you get the 32" ProFence, a precision-milled aluminum fence with two MDF sub-fences, front and rear T-tracks, a 2-1/2" dust port and an integrated bit guard. If you're…

    2 Review(s)
    $1,249.99
  23. Bench Dog® Cast Iron Router Table, Plate, Pro Fence & Steel Cabinet

    Bench Dog® Cast Iron Router Table, Plate, Pro Fence & Steel Cabinet

    router table. 1/4" Aluminum Router Plates Predrilled for Most Routers: To choose an aluminum plate, find your router in one of the four groups below. If your router is not listed, choose either the Standard Blank Plate (with a 3-1/4'' bit opening) or the Large Blank Plate (with a 3-11/16'' bit

    $999.99
  24. Jet® 1.5HP Shaper, 1/2'' & 3/4'' Spindles

    Jet® 1.5HP Shaper, 1/2'' & 3/4'' Spindles

    …heavy-duty steel stand has a removable cover for easy motor access* 1/2" and 3/4" interchangeable spindles and router bit collets for use with shaper cutter and router bits* Powerful 1-1/2HP motor delivers dependable power, even on heavy jobs* 22-3/8" x 18-1/8" solid cast iron table provides…

    $1,119.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 24 of 24
  • Page:
    1. 1
Feedback X