T3

  • Grid List
  • Page:
    1. 1
  • Items 1 - 13 of 13
  • Page:
    1. 1
  1. T3 Tormek Sharpening System

    T3 Tormek Sharpening System

    …to a wood-sheering sharpness. Its industrial-strength 120 W motor is surprisingly quiet at only 52 dB, and has a 25,000 hour running life. The T-3 comes with a Square Edge Jig for plane irons and wood chisels, an AngleMaster to set and measure the edge angle, a tube of honing compound, an…

    3 Review(s)
    $399.00
  2. Handtool Kit for Tormek Sharpening Systems HTK-705

    Handtool Kit for Tormek Sharpening Systems HTK-705

    …and carving tools. Each jig perfectly replicates the edge angle so you can sharpen hand tools faster than ever. This kit works with both the T-7 and T-3 Tormek Sharpening Systems. Technical Details:* The Knife Jig works to sharpen most knives, including carver's draw knives. Long knives need to be…

    1 Review(s)
    $215.00
  3. Rotational Base for Tormek T3 and T7 Sharpeners

    Rotational Base for Tormek T3 and T7 Sharpeners

    …from a sturdy, low-friction polymer.* In accordance with Tormek's compatibility policy, the RB-180 Rotating Base will fit the Tormek T-7, Tormek T-3, Tormek 2000 series, Tormek 1200 series, Tormek SA-250 and the Tormek N-1500 sharpeners.* Locking lever prevents inadvertant rotation from vibration.*…

    $57.00
  4. Multi-Jig SVS-50 for Tormek T-7 Sharpening System

    Multi-Jig SVS-50 for Tormek T-7 Sharpening System

    Use the Multi-Jig SVS-50 Sharpening System Jig with your Tormek T-7 or T-3 to sharpen turning skew chisels, straight or radiused edge parting and beading tools and roughing gouges. Straight carving gouges up to 2" width. Technical Details:* For turning skew chisels, straight or radiused edge parting…

    $68.00
  5. Festool FastFix® FX Right-angle Chuck

    Festool FastFix® FX Right-angle Chuck

    …tool. 1/4 inch hex drive with wire detent. Accepts Festool Centrotec or adjustable 1/2 inch chuck. Chuck rotates 360 degrees with 16 presets. Works with all existing and previous model Festool drills equipped with FastFix interface for toolless change of chucks: T+3, C12, TDK, TDD, CDD models.

    $120.00
  6. Tormek Turning Tool Setter TTS-100

    Tormek Turning Tool Setter TTS-100

    …tool to be stored on the housing for easy access.* Designed for use with Gouge Jig SVD-185 and Multi Jig SVS-50.* Includes instruction manual.* Made from glass-filled resin.* Made in Sweden. Works Best With: 18772 - Gouge Jig (SVD-185) 37592 - Multi-Jig (SVS-50) 35254 - Tormek T-7 33377 - Tormek T-3

    0 Review(s)
    $34.00
  7. Festool FastFix® FX Eccentric Chuck

    Festool FastFix® FX Eccentric Chuck

    …cost of dedicated, single use tools. Getting the job done right the first time eliminates waste of material and fasteners and saves valuable time. Works with all existing and previous model Festool drills equipped with FastFix interface for toolless change of chucks: T+3, C12, TDK, TDD, CDD models.

    $120.00
  8. FastFix® FX Depth Stop Chuck

    FastFix® FX Depth Stop Chuck

    …time, including dry wall, decks, and cabinets. Getting it right the first time eliminates waste of material and fasteners and saves valuable time. Works with all existing and previous model Festool drills equipped with FastFix interface for toolless change of chucks: T+3, C12, TDK, TDD, CDD models.

    $120.00
  9. Tormek Square Edge Jig SE-76

    Tormek Square Edge Jig SE-76

    …Mounts on Tormek's universal support* Automatically lines up chisels and plane irons for correct grinding angle* Lower clamp has a ridge to fit shorter tools* Two safety stops prevent tools from slipping off stone Best Used With: 35254 - Tormek T-7 33377 - Tormek T-3 Click Here to View Instructions:

    2 Review(s)
    $60.00
  10. Tormek Woodturner's Accessory Kit TNT-708

    Tormek Woodturner's Accessory Kit TNT-708

    …chisels with a straight or curved edges. You also get a book and DVD devoted exclusively to sharpening turning tools! Compatible with Tormek T-7 and T-3 Models. Technical Details:* Shape and sharpen all your turning tools* Gouge Jig (SVD-185) for fingernail shaped bowl gouges and spindle gouges -…

    1 Review(s)
    $334.00
  11. Tormek DBS-22 Drill Bit Sharpening Attachment

    Tormek DBS-22 Drill Bit Sharpening Attachment

    …specialists at Tormek know how to keep a cutting edge. Accepts drill bits from 1/8" to 7/8". Technical Details:* Accepts Drill bits from 1/8" to 7/8" with point angles from 90 deg to 150 deg* Clearance angle can be set to 7 deg, 9 deg, 11 deg or 14 deg Best Used With: Tormek T-7 and T-3 Models.

    1 Review(s)
    $280.00
  12. Tormek AngleMaster WM-200

    Tormek AngleMaster WM-200

    …and has handy built-in magnets that keep the AngleMaster close to your shop tool for easy reference. Works with both the Tormek T-7 (35254) and T-3 (33377) Sharpening Systems.* Grind your tool to any desired edge angle from 10° to 75° with an accuracy of 1°* Use it to measure an existing…

    $27.00
  13. Tormek T-7 40th Anniversary Limited Edition Sharpening System

    Tormek T-7 40th Anniversary Limited Edition Sharpening System

    …The Tormek RB-180 Rotational Base is constructed from a sturdy, low-frictionpolymer.* The RB-180 Rotating Base will fit the Tormek T-7, Tormek T-3, Tormek 2000series, Tormek 1200 series, Tormek SA-250 and the Tormek N-1500 sharpeners.* Locking lever prevents inadvertant rotation from vibration.*…

    $639.00
  • Grid List
  • Page:
    1. 1
  • Items 1 - 13 of 13
  • Page:
    1. 1
Feedback X