Table Saw Miter Sled

  • Grid List
  • Page:
    1. 1
  • Items 1 - 16 of 16
  • Page:
    1. 1
  1. Rockler Tablesaw CrossCut Sled

    Rockler Tablesaw CrossCut Sled

    …* 1/2" thick 23-3/4" x 23-3/4" MDF table with melamine coating.* Easy-to-read 1/2° graduations and a hair-line indicator ensure error-free setups.* Extra material allows you to cut the sled down to fit your saw perfectly.* Right edge of sled functions as a zero-clearance chip breaker.*…

    91 Review(s)
    $139.99
  2. Rockler 45 Degree Miter Sled

    Rockler 45 Degree Miter Sled

    …both pieces reference off a perfect 90&deg angle, the miters will fit perfectly.* Pre-installed adjustable nylon pins provide a no-slop fit to the miter track.* Through-slots in the base allow you to securely clamp moldings at table level.* Can be easily drilled to add extended fences and…

    85 Review(s)
    $25.99 $14.99

    SAVE 42%

  3. Incra Miter 5000 Sled

    Incra Miter 5000 Sled

    The ultimate miter cutting workstation for the table saw!* Three-panel miter sled with patented Incra incremental angle control delivers perfect, repeatable accuracy.* Includes 36"-64" telescoping miter fence and dual flip stop.* With 364 precision indexed angle stops over +/-90° to produce…

    7 Review(s)
    $299.99
  4. Portable Cross Cut Sled with FREE Cutoff Platform

    Portable Cross Cut Sled with FREE Cutoff Platform

    …standard miter track (3/4" wide x 3/8" deep)* Note: For compatibility, the right edge of your table saw's left-hand miter track (in which the sled would mount) must be between 5-3/16" and 6-5/8"from the left edge of the saw blade. This smaller sled works on most portable or benchtop-style saws,

    1 Review(s)
    $148.98 $119.99

    SAVE 19%

  5. Bench Dog® ProMAX Cast Router Table Extension for Table Saws (40-102)-Router Table Package With Plate

    Bench Dog® ProMAX Cast Router Table Extension for Table Saws (40-102)-Router Table Package With Plate

    …configuration lets you rotate the fence and work from either side of the table to maximize surface area. Plus, with a third miter slot at its disposal, your table saw becomes perfectly equipped to handle crosscut sleds. Select a package that includes a plate pre-drilled to mount your router, which…

    14 Review(s)
    $349.99
  6. Incra Build It Starter Kit

    Incra Build It Starter Kit

    …jigs. Warm up with the disc sander jig or the squaring jig for fast results. Then try the coping sled for clean, square rail-ends, throw the crosscut sled together for angled cuts on the table saw or build the tenoning jig for crisp tenons in almost no time. The choice is yours. Plus, you'll have…

    2 Review(s)
    $146.99
  7. Incra Miter Express Miter Sled

    Incra Miter Express Miter Sled

    …from your table saw when making rip cuts or other operations that don't require a sled.* Safely handles large and extra small workpieces.* Excellent crosscut and mitering control.* Comes with hold-down clamp and aluminum miter bar.* With quick-release feature.* Works with any miter gauge in your…

    2 Review(s)
    $159.99
  8. Incra® Miter 1000SE with Telescoping Fence

    Incra® Miter 1000SE with Telescoping Fence

    …setups. Made of solid aluminum with hardened anodized surface.* Miter bar has six expansion disks to adjust both sides of the bar for zero side play and anti-friction travel on all table saws and router tables with standard 3/8" x 3/4" miter slots.* Interlocking tongue-and-groove cooperation between…

    6 Review(s)
    $159.99
  9. Incra Miter 1000HD Miter Gauge

    Incra Miter 1000HD Miter Gauge

    …Perfect for both table saw and router table applications, the Miter 1000HD allows you to produce perfect, gap-free hairline glue joints on the mitered corners of any multi-sided object without trial-and-error setups. * Heavy duty machined and laser cut components* GlideLOCK miter bar features…

    23 Review(s)
    $189.99
  10. Incra Miter Gauge 1000

    Incra Miter Gauge 1000

    …67-1/2 °.* GlideLOCK Miter Bar with six expansion points allows you to adjust both sides of the bar for zero side play, anti-friction travel on all table saws with standard (or near standard) miter gauge channels. This means the bar won't wiggle around in the miter slot!* With 18" Incra track…

    $109.99
  11. Cutoff Platform for Rockler Cross Cut Sled

    Cutoff Platform for Rockler Cross Cut Sled

    This sled accessory secures to smaller table saws, providing zero-clearance workpiece support for safe, splinter-free cuts. The 1/2" thick MDF platform features a smooth sliding melamine surface and a locking aluminum miter bar. Use only with our Crosscut Sled for Portable Table Saws. This platform…

    2 Review(s)
    $28.99 $9.99

    SAVE 66%

  12. Rockler Taper / Straight Line Jig

    Rockler Taper / Straight Line Jig

    …fast, easy and more precise. Perfect for chair legs, table legs and more. Jig fits snug in any standard 3/8" x 3/4" miter slot and features a large, ergonomic handle for smooth push-action performance throughout the cut. Plus, with the miter bar removed it doubles as a stable straight line ripping…

    45 Review(s)
    $77.99 $57.99

    SAVE 26%

  13. Incra Miter Gauge V27

    Incra Miter Gauge V27

    …affordable Incra miter gauge ever!* Engineered to provide high performance for your table saw, band saw, router table, disk sander, belt sander or any other tool in need of a better miter gauge. Technical Details:* Features exclusive AngleLock indexing system* Adjustable GlideLock miter bar with…

    $67.99
  14. Rockler Bench Dog® ProMAX Cast Router Table without Plate (40-102)

    Rockler Bench Dog® ProMAX Cast Router Table without Plate (40-102)

    …you covered. Its dual fence slot configuration lets you rotate the fence and work from either side of the table to maximize surface area. Plus, with a third miter slot at its disposal, your table saw becomes perfectly equipped to handle crosscut sleds. Accepts 8-1/4" x 11-3/4" router table plates.

    $329.99
  15. Bench Dog Tools® TiterMiter™ Miter Slot and Accessory Track

    Bench Dog Tools® TiterMiter™ Miter Slot and Accessory Track

    …t-bar miter slot fits most miter gauges* Track can also be adjusted to fit many undersized miter gauges, such as those from Sears and Ridgid* 1/4'' accessory T-tracks on both top and bottom* Heavy-duty extruded aluminum stiffens and protects the front edge of your router table* Fits router tables

    $49.99
  16. The Best of Woodworker's Journal 3 Book Set

    The Best of Woodworker's Journal 3 Book Set

    …Router Straightedge Jig * Router Surface Jig * Shop-Built Panel Saw * Simple Crosscut Sled * Sliding Dovetail Systems * Table Saw Tenoning Jig * The Miter Clamp Jig * Traveling Router Table * Ultimate Fluting Jig * Ultimate Router Table Boxes, Clocks, Lamps and Small Projects * Artist s Pencil Box *…

    $55.85
  • Grid List
  • Page:
    1. 1
  • Items 1 - 16 of 16
  • Page:
    1. 1
Feedback X