Table Top Edge Router Bits

  • Items 1 - 24 of 43
  • Page:
    1. 1
    2. 2
  1. Rockler Table Top Edge Router Bit - 1-3/16" Dia x 3/8" H x 1/4" Shank

    Rockler Table Top Edge Router Bit - 1-3/16" Dia x 3/8" H x 1/4" Shank

    This bit features an elongated round over that softens and beautifies table edges and moldings. You can set it to rout a small shoulder on the face of the workpiece, or to rout flush for a smooth round over. The deepness of the profile results in a very smooth transition from radius to face. Top

    $42.99
  2. Freud® Quadra-Cut™ Rounding Over Router Bits - 1/2" Shank

    Freud® Quadra-Cut™ Rounding Over Router Bits - 1/2" Shank

    …over bits add softness to cabinetry edges and table tops. Their exclusive 4-cutter Quadra-Cut design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Rounding over bit applications: Soften furniture edges and create…

    11 Review(s)
    From: $35.97
  3. Freud® 99-027 Round Over Table Edge and Handrail Router Bit - 2-19/32" Dia x 23/32" H x 1/2" Shank

    Freud® 99-027 Round Over Table Edge and Handrail Router Bit - 2-19/32" Dia x 23/32" H x 1/2" Shank

    …attractive edge to table tops, plaques and handrails with this versatile router bit from Freud. If used as a table edge bit, it routs a smooth, elongated radius. Set it deeper to rout a small shoulder, or shallower for a basic roundover. If used as a handrail bit, rout the handrail on both edges to…

    1 Review(s)
    $102.97
  4. Freud® Quadra-Cut™ Bevel Raised Panel Router Bits - 1/2" Shank

    Freud® Quadra-Cut™ Bevel Raised Panel Router Bits - 1/2" Shank

    …to raise Shaker panels, but can also be used to bevel the underside of table tops. It features Freud's exclusive Quadra-Cut™ 4-cutter design, which provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Application:…

    1 Review(s)
    From: $98.97
  5. Rockler Table Top Edge Router Bit - 2-1/2" Dia x 3/4" H x 1/2" Shank

    Rockler Table Top Edge Router Bit - 2-1/2" Dia x 3/4" H x 1/2" Shank

    …it's generous 2-1/2" diameter, this edge profiling bit works beautifully for table tops, cabinet tops and built-up moldings. The broad round over tapers toward the edge, resulting in a lighter, less bulky look. You can profile either the bottom side or the top side to achieve different visual…

    1 Review(s)
    $69.99
  6. Rockler Table Top Edge Router Bit - 2-1/2" Dia x 3/4" H x 1/2" Shank

    Rockler Table Top Edge Router Bit - 2-1/2" Dia x 3/4" H x 1/2" Shank

    Often woodworkers make the mistake of using a router bit that is too small for table tops. This one is ideally proportioned at a full 2-1/2" wide overall, and offers a spacious profile with a simple ogee curve as pleasing to the eye as it is to the touch. Click the "Tech Specs" tab for specific…

    $79.99
  7. Freud® 99-011 Quadra-Cut™ Table Top Classical Bold Router Bit - 1-5/8" Dia x 5/8" H x 1/2" Shank

    Freud® 99-011 Quadra-Cut™ Table Top Classical Bold Router Bit - 1-5/8" Dia x 5/8" H x 1/2" Shank

    The table top classical bold bit is designed with sharp curves to generate a strong, uplifting edge for table tops and other edge profiles. It is generously dimensioned with a large 25/64" roundover radius and a smaller 11/64" cove radius to create a bold effect on furniture of all types. It…

    $67.47
  8. Freud® Quadra-Cut™ Cove Raised Panel Router Bits - 1/2" Shank

    Freud® Quadra-Cut™ Cove Raised Panel Router Bits - 1/2" Shank

    …clean edges every time, even with cross-grain cuts in difficult materials. Application: Ideal for creating raised panels for doors and paneling, as well as decorative tops, plaques and molding* Revolutionary Quadra-Cut™design combines two small wings that cut downward to shear the top edge for…

    2 Review(s)
    From: $104.47
  9. Rockler Table Top Edge Router Bit - 2-1/2" Dia x 25/32" H x 1/2" Shank

    Rockler Table Top Edge Router Bit - 2-1/2" Dia x 25/32" H x 1/2" Shank

    …it's generous 2-1/2" diameter, this edge profiling bit works beautifully for table tops, cabinet tops and built-up moldings. The broad round over tapers toward the edge, resulting in a lighter, less bulky look. You can profile either the bottom side or the top side of your panel to achieve different…

    $79.99
  10. Rockler Edge Beading Router Bits - 1/4" Shank

    Rockler Edge Beading Router Bits - 1/4" Shank

    With its integral 1/2" guide bearing, this beading bit is a snap to use. There is no need to set the depth of cut with a fence, and you can even use the bit without a router table at all. The bit also features a taller section at the top of the carbide, which allows you more freedom to adjust the…

    4 Review(s)
    From: $34.99
  11. Rockler Edge Beading Router Bits - 1/2" Shank

    Rockler Edge Beading Router Bits - 1/2" Shank

    With its integral 1/2" guide bearing, this beading bit is a snap to use. There is no need to set the depth of cut with a fence, and you can even use the bit without a router table at all. The bit also features a taller section at the top of the carbide, which allows you more freedom to adjust the…

    4 Review(s)
    $34.99 From: $26.24

    SAVE 25%

  12. Freud® 99-452 Quadra-Cut™ Bead Table Edge and Handrail Router Bit - 2-5/8" Dia x 25/32" H x 1/2" Shank

    Freud® 99-452 Quadra-Cut™ Bead Table Edge and Handrail Router Bit - 2-5/8" Dia x 25/32" H x 1/2" Shank

    …with another profile to create a custom design for railings and table edges.* For handrails, use our Handrail Router Bit (91708, sold separately) to rout the finger grooves.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted portable routers.

    $101.97
  13. Freud® Cove Router Bits - 1/2" Shank

    Freud® Cove Router Bits - 1/2" Shank

    Use these coving bit to apply decorative edging to table tops, plaques and signs, and to embellish other profiles and moldings. The shear angle slices through wood similar to the way a finely honed hand plane would. Rugged 1/2" shank deadens vibration, while the finely sharpened carbide ensures a…

    From: $34.97
  14. Freud® Rabbeting Router Bits - 1/2" Shank

    Freud® Rabbeting Router Bits - 1/2" Shank

    …such as for letting in back panels and the tops and bottoms of cabinets. The bits feature high-grade carbide, which produces super smooth cuts on both surfaces of the rabbet.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted portable routers.

    From: $31.97
  15. Freud® Rabbeting Router Bits - 1/2" Shank

    Freud® Rabbeting Router Bits - 1/2" Shank

    …applications, such as for letting in back panels and the tops and bottoms of cabinets. The bits feature high-grade carbide, which produces super smooth cuts on both surfaces of the rabbet.* Steel pilots can be removed from bits and used with edge guides for wider rabbets.* Cuts all composition…

    2 Review(s)
    From: $42.47
  16. Rockler Table Edge/Handrail Router Bit - 2-3/4" Dia x 1/2" Shank

    Rockler Table Edge/Handrail Router Bit - 2-3/4" Dia x 1/2" Shank

    …used as a handrail bit, the handrail is routed on both edges to put a smooth convex contour on the top face of the handrail. If desired, use our Handrail Router Bit (91708, sold separately) to rout the finger grooves on the cheeks of the handrail. When used as a table edge bit, it routs an elegant,…

    $74.99
  17. Rockler Roman Ogee Router Bits - 1/4" Shank

    Rockler Roman Ogee Router Bits - 1/4" Shank

    This ogee is features a smooth curve, so the cove and round over blend seamlessly into one another. The profile works well for edging table tops, or you can use it to rout lengths of molding stock to trim out the underside of tops, soffits and built-up crown moldings. 1/4" shanks.

    1 Review(s)
    From: $31.99
  18. Rockler Roman Ogee Router Bits - 1/2" Shank

    Rockler Roman Ogee Router Bits - 1/2" Shank

    This ogee is features a smooth curve, so the cove and round over blend seamlessly into one another. The profile works well for edging table tops, or you can use it to rout lengths of molding stock to trim out the underside of tops, soffits and built-up crown moldings.

    $31.99 From: $23.99

    SAVE 25%

  19. Freud® Top and Bottom Bearing Flush Trim Router Bits

    Freud® Top and Bottom Bearing Flush Trim Router Bits

    Double bearing design allows you to choose the cutting direction that best suits your work piece. Freud's Top & Bottom Bearing Bits let you rout half the curve in one direction, flip the work piece over and rout the other half in the opposite direction without repositioning your pattern. Perfect for…

    From: $34.47
  20. Freud® Downshear Helix Flush Trim Router Bits - 1/2" Shank

    Freud® Downshear Helix Flush Trim Router Bits - 1/2" Shank

    These bits are ideal for trimming 3/4" material flush with a substrate—shelf caps with shelves and face frames with cabinet sides, for example. They can also be used for trimming laminate counter tops and doing pattern work. The downshear cutting angle produces a slicing action for chip-free,…

    3 Review(s)
    From: $32.97
  21. Freud® Top Bearing Flush Trim Router Bits - 1/2" Shank

    Freud® Top Bearing Flush Trim Router Bits - 1/2" Shank

    …bearings on these router bits make them ideal for grooving, lettering and dadoes, as well as any other template work where the template is mounted on the top face of the workpiece. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as…

    From: $31.97
  22. Freud® Top Bearing Mortising Dado Router Bits - 1/4" Shank

    Freud® Top Bearing Mortising Dado Router Bits - 1/4" Shank

    …on CNC and other automatic routers as well as hand-held and table-mounted portable routers. * Features TiCo™ Hi-Density carbide for longer bit life and a flawless finish.* Perma-SHIELD® Non-stick Coating protects from heat, gumming, and corrosion.* Each bit is computer-balanced and…

    0 Review(s)
    From: $22.47
  23. Freud® Traditional Beading Router Bits - 1/2" Shank

    Freud® Traditional Beading Router Bits - 1/2" Shank

    …beading bit makes quick work of routing both beaded moldings and beaded edges for larger cabinetry elements. With its integral guide bearing, there is no need to set the depth of cut with a fence. You can even use the bit without a router table at all. The taller section at the top of the carbide…

    3 Review(s)
    From: $35.97
  24. Freud® Bearing Flush Trim Router Bits - 1/2" Shank

    Freud® Bearing Flush Trim Router Bits - 1/2" Shank

    Trimming laminate counter tops and doing intricate pattern work with templates is a breeze with this flush trim bit from Freud. With two flutes to provide fast chip clearance, and razor sharp carbide for smooth, burn-free cuts, these bits will turn out top-quality edges time after time.* Cuts all…

    From: $18.97
  • Items 1 - 24 of 43
  • Page:
    1. 1
    2. 2
Feedback X