Table Top Router Bit

  • Items 1 - 24 of 114
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Table Edge/Handrail Router Bit - 2-3/4" Dia x 1/2" Shank

    Rockler Table Edge/Handrail Router Bit - 2-3/4" Dia x 1/2" Shank

    …used as a handrail bit, the handrail is routed on both edges to put a smooth convex contour on the top face of the handrail. If desired, use our Handrail Router Bit (91708, sold separately) to rout the finger grooves on the cheeks of the handrail. When used as a table edge bit, it routs an elegant,…

    $74.99
  2. Freud® Top and Bottom Bearing Flush Trim Router Bits

    Freud® Top and Bottom Bearing Flush Trim Router Bits

    Double bearing design allows you to choose the cutting direction that best suits your work piece. Freud's Top & Bottom Bearing Bits let you rout half the curve in one direction, flip the work piece over and rout the other half in the opposite direction without repositioning your pattern. Perfect for…

    From: $34.47
  3. Rockler Table Top Edge Router Bit - 1-3/16" Dia x 3/8" H x 1/4" Shank

    Rockler Table Top Edge Router Bit - 1-3/16" Dia x 3/8" H x 1/4" Shank

    This bit features an elongated round over that softens and beautifies table edges and moldings. You can set it to rout a small shoulder on the face of the workpiece, or to rout flush for a smooth round over. The deepness of the profile results in a very smooth transition from radius to face. Top

    $42.99
  4. Rockler Table Top Edge Router Bit - 2-1/2" Dia x 3/4" H x 1/2" Shank

    Rockler Table Top Edge Router Bit - 2-1/2" Dia x 3/4" H x 1/2" Shank

    Often woodworkers make the mistake of using a router bit that is too small for table tops. This one is ideally proportioned at a full 2-1/2" wide overall, and offers a spacious profile with a simple ogee curve as pleasing to the eye as it is to the touch. Click the "Tech Specs" tab for specific…

    $79.99
  5. Freud® 99-011 Quadra-Cut™ Table Top Classical Bold Router Bit - 1-5/8" Dia x 5/8" H x 1/2" Shank

    Freud® 99-011 Quadra-Cut™ Table Top Classical Bold Router Bit - 1-5/8" Dia x 5/8" H x 1/2" Shank

    The table top classical bold bit is designed with sharp curves to generate a strong, uplifting edge for table tops and other edge profiles. It is generously dimensioned with a large 25/64" roundover radius and a smaller 11/64" cove radius to create a bold effect on furniture of all types. It…

    $67.47
  6. Router Xtreme Xtension™

    Router Xtreme Xtension™

    router bits from above the table with only one tool - PLUS extend router bit's reach. * No need to lock your spindle - single locking screw secures the bit.* Runs 1/8" through 3-1/2" diameter cutters.* Additional 1-1/4" length and 1" deep bore provide complete support of all 1/2" and 1/4" shank bits

    5 Review(s)
    $76.99
  7. Rockler Table Top Edge Router Bit - 2-1/2" Dia x 3/4" H x 1/2" Shank

    Rockler Table Top Edge Router Bit - 2-1/2" Dia x 3/4" H x 1/2" Shank

    …generous 2-1/2" diameter, this edge profiling bit works beautifully for table tops, cabinet tops and built-up moldings. The broad round over tapers toward the edge, resulting in a lighter, less bulky look. You can profile either the bottom side or the top side to achieve different visual effects.…

    1 Review(s)
    $69.99
  8. Rockler High Pressure Laminate Router Table, Fence & Plate

    Rockler High Pressure Laminate Router Table, Fence & Plate

    …locking points.* 24" x 32" table for over five square feet of surface area.* Ergonomic T-knobs for easy fence adjustment.* Includes bit safety guard for safe routing.* Extruded aluminum backer provides a stiff, straight backbone.* Large opening in fence for big router bits.* Aluminum fence backer…

    6 Review(s)
    $249.99
  9. Rockler Wedge Tongue and Groove Router Bit - 1-1/2" Dia x 1-3/16" H x 1/2" Shank

    Rockler Wedge Tongue and Groove Router Bit - 1-1/2" Dia x 1-3/16" H x 1/2" Shank

    Stronger than dowels and biscuits, the tongue and groove joints you'll cut with this bit are perfect for edge-joining panels, table tops, or any other glue-up project. The interlocking design increases the available surface area for the glue, resulting in an incredibly strong joint. Since the pieces…

    8 Review(s)
    $49.99
  10. Router Bit Height Adjustment Handle

    Router Bit Height Adjustment Handle

    router table. The eight inch shaft with hex wrench end allows precise top of the table height adjustment. The Router Bit Height Adjustment Handle works with Porter Cable 890 and 8529 series routers. Technical Details:* 8" shaft with hex wrench end* For use with Porter Cable 890 & 8529 series routers

    $19.99
  11. Rockler Table Top Edge Router Bit - 2-1/2" Dia x 25/32" H x 1/2" Shank

    Rockler Table Top Edge Router Bit - 2-1/2" Dia x 25/32" H x 1/2" Shank

    …generous 2-1/2" diameter, this edge profiling bit works beautifully for table tops, cabinet tops and built-up moldings. The broad round over tapers toward the edge, resulting in a lighter, less bulky look. You can profile either the bottom side or the top side of your panel to achieve different…

    $79.99
  12. Rockler Router Table Plates

    Rockler Router Table Plates

    bit opening, plate locking bolts and router mounting hardware.* Please note: Because different table top materials (HPL, phenolic or cast iron) require different leveling screws, the leveling screws are included with the table tops.* For customers making custom table tops, we recommend the Router

    8 Review(s)
    $59.99
  13. Rockler Router Table Fence

    Rockler Router Table Fence

    Our Rockler Router Table Fence boasts the same features and tool-free adjustability as the original, PLUS an included dust port, bright, high-visibility bit guard and fence faces, and a gleaming black aluminum backbone. At 32" long, this extruded backer provides plenty of reference surface for…

    $84.99
  14. Rockler Pro Router Table Fence

    Rockler Pro Router Table Fence

    …virtually any router table operation. The two melamine-coated MDF fence faces are adjustable for low- and zero-clearance routing, while the front- and rear-facing universal T-tracks accept featherboards, stops, hold-downs, and more. The fence also includes an integrated translucent bit guard and a…

    $139.99
  15. Bench Dog® Router Table Plates

    Bench Dog® Router Table Plates

    …Group D routers: Bosch 1619-1619EV; Freud FT2000; DeWalt 625 PLEASE NOTE: Because different table top materials (HPL, phenolic or cast iron) require different leveling screws, the leveling screws are included with the table tops. For customers making custom table tops, we recommend Router Plate…

    7 Review(s)
    $64.99
  16. Rockler Steel Router Table Cabinet

    Rockler Steel Router Table Cabinet

    Top, Drawer Box Kit, and Safety Switch Kit are available separately. The Router Table Shim (42817 - sold separately) is needed for mounting a Phenolic router table top to the cabinet. * Heavy-duty galvanized steel construction gives it the heft and look of a shaper cabinet* Storage for router bits,

    7 Review(s)
    $459.99
  17. Bench Dog® Router Table Pro Fence 32''

    Bench Dog® Router Table Pro Fence 32''

    …of the aluminum spine. These tracks, which are perfect for attaching featherboards, stops, hold-downs, and more, accept any accessory with 1/4" t-bolts, 5/16" hex-bolts, and 1/4" hex bolts. On top of two adjustable MDF faces, the fence also includes an integrated bit guard and a 2-1/2" dust port.

    1 Review(s)
    $159.99
  18. Freud® 99-027 Round Over Table Edge and Handrail Router Bit - 2-19/32" Dia x 23/32" H x 1/2" Shank

    Freud® 99-027 Round Over Table Edge and Handrail Router Bit - 2-19/32" Dia x 23/32" H x 1/2" Shank

    Apply an attractive edge to table tops, plaques and handrails with this versatile router bit from Freud. If used as a table edge bit, it routs a smooth, elongated radius. Set it deeper to rout a small shoulder, or shallower for a basic roundover. If used as a handrail bit, rout the handrail on both…

    1 Review(s)
    $102.97
  19. Freud® 99-452 Quadra-Cut™ Bead Table Edge and Handrail Router Bit - 2-5/8" Dia x 25/32" H x 1/2" Shank

    Freud® 99-452 Quadra-Cut™ Bead Table Edge and Handrail Router Bit - 2-5/8" Dia x 25/32" H x 1/2" Shank

    …with another profile to create a custom design for railings and table edges.* For handrails, use our Handrail Router Bit (91708, sold separately) to rout the finger grooves.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted portable routers.

    $101.97
  20. Incra Master Lift II Designed for Rockler Tables

    Incra Master Lift II Designed for Rockler Tables

    …to work with Rockler Router Tables. Technical Details:* Exclusive INCRA MagnaLOCK reducing ring system for instant ring changes and perfect ring fit* Includes five steel reducing rings - 3/8", 1", 1-5/8", 2-5/8", 3-5/8"* Change router bits from the top of the table* Quickly make super precise,…

    8 Review(s)
    $329.99
  21. Pro Phenolic Router Table, Fence, Stand, & FX Router Lift

    Pro Phenolic Router Table, Fence, Stand, & FX Router Lift

    …dust port and bit guard. 10-point plate leveling/locking system. 24" x 32" table. 8-1/4" x 11-3/4" x 1/4" aluminum plate. * Includes our acclaimed Rockler Router Lift FX for above-table bit height adjustments and bit changes.* The Router Lift FX accepts the following routers: Porter-Cable 690/890…

    1 Review(s)
    $649.99
  22. Rockler Pro Phenolic Router Table, Fence, & FX Router Lift

    Rockler Pro Phenolic Router Table, Fence, & FX Router Lift

    …610, 616, 618. * Includes our acclaimed Rockler Router Lift FX for above-table bit height adjustments and bit changes.* Router Lift FX includes insert ring with 1-1/2" opening.* Featuring 8-points of plate leveling and 2 locking points.* 24" x 32" table for over five square feet of surface area.*…

    $549.99
  23. Rockler Pro Phenolic Router Table, Fence & Plate

    Rockler Pro Phenolic Router Table, Fence & Plate

    …1/4" Aluminum Router Plates Predrilled for Most Routers: To choose an aluminum plate, find your router in one of the four groups below. If your router is not listed, choose either the Standard Blank Plate (with a 3-1/4" bit opening) or the Large Blank Plate (with a 3-11/16" bit opening) and drill…

    2 Review(s)
    $399.99 $299.99

    SAVE 25%

  24. Rockler High Pressure Laminate Router Table, Fence, Plate, & Stand

    Rockler High Pressure Laminate Router Table, Fence, Plate, & Stand

    …locking points.* 24" x 32" table for over five square feet of surface area.* Ergonomic T-knobs for easy fence adjustment.* Includes bit safety guard for safe routing.* Extruded aluminum backer provides a stiff, straight backbone.* Large opening in fence for big router bits.* Aluminum fence backer…

    3 Review(s)
    $349.99
  • Items 1 - 24 of 114
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X