Table Hinge

  • Items 1 - 24 of 40
  • Page:
    1. 1
    2. 2
  1. Drop Leaf Support-Select size

    Drop Leaf Support-Select size

    …eliminate sagging. Sturdy, rugged and precision crafted for years of trouble-free service. To determine correct support for your table: measure distance "A" (apron to hinge pin center), then determine "B" on the graph by matching "A" with the drop leaf support length. * Brass finish.* Screws…

    33 Review(s)
    From: $14.69
  2. Twin Pin Sewing Machine Hinges-Select Option

    Twin Pin Sewing Machine Hinges-Select Option

    …machine tables and drop front desks. Made of highest quality solid extruded brass. These hinges have twin pin joints with steel pins and recessed knuckles on the top for a perfectly flat surface. Solid extruded brass with a polished finish. Standard Hinges are 1-3/16" x 2-3/4". The Narrow Hinges are…

    12 Review(s)
    From: $12.59
  3. Folding Leaf Hinge

    Folding Leaf Hinge

    Add narrow leaves to your table to create a round or oval top. 5-1/4" x 7-3/4" mechanism doubles as a hinge and support, and locks the leaves in either the closed or open position.* Stiff brass plated steel prevents sagging.* No other supports are required.* For table leaves up to 9" wide.*…

    3 Review(s)
    $17.19
  4. Brass Butler Tray Table Hinges

    Brass Butler Tray Table Hinges

    Solid Brass Table Hinge with a steel spring.* Stops at a 90° angle.* Hinge measures 2-1/2" long x 1-1/2" wide.* Sold in pairs.

    37 Review(s)
    $19.99
  5. Folding Leg Bracket

    Folding Leg Bracket

    Can be mounted to virtually any size of table leg! Supportive of even large or heavier tables, this folding leg bracket also offers the advantage of fitting any size leg to the folding flange of the bracket!* Top of bracket measures 2-3/4" x 2-3/16" overall* Leg mounting bracket measures 1-3/4" (W)…

    43 Review(s)
    $15.39
  6. Flush Hinge

    Flush Hinge

    Eliminate the gap created by most hinges on drop leaf tables. Provides a snug fit between table halves and leaves in any position.* Use on 3/4" wood only.* Sold in pairs.

    3 Review(s)
    $10.39
  7. Brass-Plated Drop Leaf Hinges for Shaped Edges

    Brass-Plated Drop Leaf Hinges for Shaped Edges

    …replacement for your worn-out table hinges? These brass-plated Drop Leaf Hinges for Shaped Edges provide an elegant appearance and smooth up-and-down action for table leaves that incorporate a rule joint. Simply install under your table top for easy drop-down action on your table leaves when opening…

    17 Review(s)
    $11.59
  8. Deluxe Sewing Center Hardware Kit

    Deluxe Sewing Center Hardware Kit

    …necessary hardware to build the Deluxe Sewing Center (wood not included). Includes brass sewing machine hinges, twin ball catches, cherry shaker knobs, table pins, and brass piano hinges. Recommended Products to use with Kit:* 38655 - Deluxe Sewing Center Plan: The detailed plan gives instructions…

    24 Review(s)
    $72.49
  9. Roto Hinges-Choose size

    Roto Hinges-Choose size

    Flexibility for folding legs! Ideal where pivoting action is needed for indoor applications. Simply drill two holes to install Roto hinges. Technical Details:* Made with zinc plated steel rivets and a maple cylinder for durability.* Self-centering and self-spacing.* Manufactured to high standards of…

    14 Review(s)
    From: $6.19
  10. Banquet Table and Bench Legs-Choose table or bench legs

    Banquet Table and Bench Legs-Choose table or bench legs

    Replace your damaged table legs or build your own banquet table. The banquet table legs are constructed of 1" diameter 19 gauge steel tubing providing sturdy support. The banquet table legs come in sets of two, enough for one table. Technical Details: 13772- Banquet Table legs 29" High x 24" Wide*…

    15 Review(s)
    $45.99
  11. Table Hinge L=81MM W=30MM (SMH-83/CR)

    Table Hinge L=81MM W=30MM (SMH-83/CR)

    Material: 304 Stainless Steel.Finish: Satin (S) Chrome (CR) * Catalog Page (PDF format)

    $4.99
  12. Yellow Zinc-Plated Drop Leaf Hinges for Straight Edges

    Yellow Zinc-Plated Drop Leaf Hinges for Straight Edges

    …replacement for your worn-out table hinges? These yellow zinc-plated Drop Leaf Hinges for Straight Edges provide a smooth up-and-down action for table leaves that incorporate a butt joint. Simply install under your table top for easy drop-down action on your table leaves when opening and proper…

    17 Review(s)
    $11.99
  13. Table Hinge, MA-5 - Mirror

    Table Hinge, MA-5 - Mirror

    Material: 304 Stainless Steel.Finish: MirrorSupplied with screws. * Catalog Page (PDF format)

    $12.99
  14. Federal Desk Plan and Desk Support & Hinge Set

    Federal Desk Plan and Desk Support & Hinge Set

    …automatically pulls out lower support. When you close the deck, the hardware pulls the support arm back inside to the stored position. Low profile hinges and pull-out supports maintain a clean, tidy look. The hardware attaches to both sides of your desk. Statuary bronze plated steel, 12" overall.*…

    10 Review(s)
    From: $4.19
  15. S/S Table Hinge L=81MM W=30MM (SMH-83/S)

    S/S Table Hinge L=81MM W=30MM (SMH-83/S)

    Material: 304 Stainless Steel.Finish: Satin (S) Chrome (CR) * Catalog Page (PDF format)

    $5.99
  16. Card Table Leg Brackets

    Card Table Leg Brackets

    Card Table Leg Brackets* Solidly built for durability.* Brackets firmly lock card table legs open for stability and allow them to fold up easily.* Use with 1-1/4" to 1-3/4" square legs.* Reversible right or left.* Requires minimum apron height of 1-1/2".* Sold in Sets of 2.

    11 Review(s)
    $22.99
  17. Snap-Closing Semi-Concealed Hinges - For 1/4" Overlay Doors (#5)

    Snap-Closing Semi-Concealed Hinges - For 1/4" Overlay Doors (#5)

    …1" thick doors. No catch required. Note: Installation requires cutting an arced slot 1/4" wide in the cabinet door for the hinge to rest in. For overlay door hinges, the slot should be cut 1/2" deep at its deepest point and about 1-7/8" long using a table saw or dado set no more than 8" in diameter.

    14 Review(s)
    $3.99
  18. Deluxe Sewing Center Plan

    Deluxe Sewing Center Plan

    …not included). Includes brass sewing machine hinges, twin ball catches, cherry shaker knobs, table pins, and brass piano hinges.* 33100 - Sewing Machine Lift Mechanism: Designed to lift and lower a sewing machine. Mounts to underside of table top and back of cabinet. Release and latch mechanism…

    25 Review(s)
    $13.95
  19. Powermatic® Tilt Table Mortiser w/Stand

    Powermatic® Tilt Table Mortiser w/Stand

    …position table mounted swiveling vise clamp accommodates angled work pieces * Feed lever features size positions allowing for quick adjustments * Table and fence tilt from 0 to 35° for angled mortises * Gas cylinder controlled rack and pinion system for smooth head raising and lowering * Hinged

    1 Review(s)
    $1274.99
  20. Jet® Deluxe Xacta 3HP 10'' Table Saw w/50'' Fence, Downdraft Table, & Leg Set

    Jet® Deluxe Xacta 3HP 10'' Table Saw w/50'' Fence, Downdraft Table, & Leg Set

    …extension wings provides the largest table surface in its class * Poly-V drive belt system delivers efficient, quiet operation * Rail-mounted magnetic switch is easy to reach and provides overload protection * Enclosed cabinet with built-in sealed storage drawer * Hinged motor cover on cabinet gives…

    $2649.99
  21. Powermatic® Benchtop Deluxe Mortiser

    Powermatic® Benchtop Deluxe Mortiser

    …account for the space needed between the bit and chisel during set-up. Large work surfaces in the table and fence allow for more stability and accurate cuts. The new mortiser also includes a large hinged chuck door with magnetic catch. This unique element allows the user to easily access the drill…

    1 Review(s)
    $489.99
  22. Freud Canoe Joint Bits

    Freud Canoe Joint Bits

    These bits rout corresponding parts that fit together to form a joint with a "hinging" action that is perfect for any curved element. They have an 1/8" radius, which is suitable for 1/4" stock. Canoe makers use them to make the long, seamless joints in the curving hulls of their canoes. In addition,…

    From: $49.97
  23. Jet® Deluxe Xacta 3HP 10'' Table Saw w/50'' Fence

    Jet® Deluxe Xacta 3HP 10'' Table Saw w/50'' Fence

    …extension wings provides the largest table surface in its class* Poly-V drive belt system delivers efficient, quiet operation* Rail-mounted magnetic switch is easy to reach and provides overload protection* Enclosed cabinet with built-in sealed storage drawer* Hinged motor cover on cabinet gives…

    1 Review(s)
    $2449.99
  24. Jet® Deluxe Xacta 5HP 10'' Table Saw w/50'' Fence, Downdraft Table, & Leg Set

    Jet® Deluxe Xacta 5HP 10'' Table Saw w/50'' Fence, Downdraft Table, & Leg Set

    …extension wings provides the largest table surface in its class * Poly-V drive belt system delivers efficient, quiet operation * Rail-mounted magnetic switch is easy to reach and provides overload protection * Enclosed cabinet with built-in sealed storage drawer * Hinged motor cover on cabinet gives…

    $2859.99
  • Items 1 - 24 of 40
  • Page:
    1. 1
    2. 2
Feedback X