Table Router Bit

  • Items 1 - 24 of 283
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler 2-Pc. Drop Leaf Table Rule Joint Router Bit Set

    Rockler 2-Pc. Drop Leaf Table Rule Joint Router Bit Set

    …precisely hinged joints on drop-leaf tables have always been a mark of fine craftsmanship. Now, with this dedicated two-piece router bit set, you can get the same precise results whether you're a beginner or a master woodworker. The set bundles a cove bit with a corresponding roundover, specifically…

    1 Review(s)
    $64.99
  2. Freud Rabbeting Bits

    Freud Rabbeting Bits

    …such as for letting in back panels and the tops and bottoms of cabinets. The bits feature high-grade carbide, which produces super smooth cuts on both surfaces of the rabbet.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted portable routers.

    From: $31.97
  3. Drawer Pull Router Bit

    Drawer Pull Router Bit

    …this bit to apply a comfortable finger recess around the edges of doors and drawers, useful when you want a clean look without knobs or other hardware. You can also use it to rout finger pull stock that is applied separately, and you can even use it as a decorative edge treatment for table tops and…

    $49.99
  4. Freud Round-Over Table Edge & Handrail Bits

    Freud Round-Over Table Edge & Handrail Bits

    Apply an attractive edge to table tops, plaques and handrails with this versatile router bit from Freud. If used as a table edge bit, it routs a smooth, elongated radius. Set it deeper to rout a small shoulder, or shallower for a basic roundover. If used as a handrail bit, rout the handrail on both…

    1 Review(s)
    $102.97
  5. Trend® Mortise & Tenon Jig

    Trend® Mortise & Tenon Jig

    Quick, accurate and versatile jig allows you to cut perfect-fitting mortise and tenons with a plunge router - requires only one setup to cut both pieces.* Ideal for cabinet, chair and table construction. Technical Details:* Fully adjustable for compound angle joints.* With reversible template to…

    $383.99
  6. Freud Adjustable Tongue & Groove Bit Set

    Freud Adjustable Tongue & Groove Bit Set

    …TiCo™ Hi-Density carbide for a longer bit life and flawless finish.* Adjustable at .002 inch increments for stock thickness of 1/2" to 1-1/4" and groove widths of 7/32" to 3/8".* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on table-mounted portable routers.

    7 Review(s)
    $79.97
  7. Table Edge/Handrail Router Bit

    Table Edge/Handrail Router Bit

    …used as a handrail bit, the handrail is routed on both edges to put a smooth convex contour on the top face of the handrail. If desired, use our Handrail Router Bit (91708, sold separately) to rout the finger grooves on the cheeks of the handrail. When used as a table edge bit, it routs an elegant,…

    $74.99
  8. Table Top Edge Router Bit

    Table Top Edge Router Bit

    This bit features an elongated round over that softens and beautifies table edges and moldings. You can set it to rout a small shoulder on the face of the workpiece, or to rout flush for a smooth round over. The deepness of the profile results in a very smooth transition from radius to face. Top…

    $42.99
  9. Rockler Table Top Edge Bit

    Rockler Table Top Edge Bit

    Often woodworkers make the mistake of using a router bit that is too small for table tops. This one is ideally proportioned at a full 2-1/2" wide overall, and offers a spacious profile with a simple ogee curve as pleasing to the eye as it is to the touch. Click the "Tech Specs" tab for specific…

    $79.99
  10. Freud Quadra-Cut™ Ogee Table Edge & Handrail Bits

    Freud Quadra-Cut™ Ogee Table Edge & Handrail Bits

    Use this router bit to apply an attractive edge to tables, plaques, signs and handrails. Freud's exclusive Quadra-Cut™ 4-cutter design provides the smoothest cuts possible. Two large cutters shear upwards to hog out the profile, while two smaller cutters shear downwards to eliminate any…

    1 Review(s)
    $88.97 $66.72

    SAVE 25%

  11. Rockler Pro Phenolic Router Table, Fence & Plate

    Rockler Pro Phenolic Router Table, Fence & Plate

    …1/4" Aluminum Router Plates Predrilled for Most Routers: To choose an aluminum plate, find your router in one of the four groups below. If your router is not listed, choose either the Standard Blank Plate (with a 3-1/4" bit opening) or the Large Blank Plate (with a 3-11/16" bit opening) and drill…

    2 Review(s)
    $399.99
  12. Router Lift FX

    Router Lift FX

    Adjust bit height quickly and easily from atop your router table, and enjoy sag-free support from the heavy-duty plate. The plate is perfectly sized to fit all of our new router tables, while the lift housing accepts a wide range of small-to-medium sized routers. * The Router Lift FX Plus accepts…

    41 Review(s)
    $206.99
  13. Freud Carbide Up-Spiral Router Bits

    Freud Carbide Up-Spiral Router Bits

    …carbide up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits. Ideal for production settings.* Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.* Use on CNC and other automatic routers as well as…

    1 Review(s)
    From: $51.47
  14. Freud Quadra-Cut Table Top Classical Bold Bit

    Freud Quadra-Cut Table Top Classical Bold Bit

    The table top classical bold bit is designed with sharp curves to generate a strong, uplifting edge for table tops and other edge profiles. It is generously dimensioned with a large 25/64" roundover radius and a smaller 11/64" cove radius to create a bold effect on furniture of all types. It…

    $67.47
  15. Rockler High Pressure Laminate Router Table, Fence, Stand, & FX Router Lift

    Rockler High Pressure Laminate Router Table, Fence, Stand, & FX Router Lift

    bit height adjustments and bit changes.* The Router Lift FX accepts the following routers: Porter-Cable 690/890 series, Bosch 1617-16-18, DeWalt 610, 616, 618.* Router Lift FX includes insert ring with 1-1/2" opening.* Featuring 8-points of plate leveling and 2 locking points.* 24" x 32" table for…

    0 Review(s)
    $499.99
  16. Freud® 2-pc. Entry & Interior Router Bit Set

    Freud® 2-pc. Entry & Interior Router Bit Set

    Use this router bit set to build beautiful custom entry doors and interior passage doors. With true rail-and-stile construction, you'll get rock-solid joints that last a lifetime. The bits are larger than standard rail and stile bits, and are capable of cutting joints for doors up to 1-3/4" thick.…

    1 Review(s)
    $199.97
  17. Freud # 99-472 Beadboard Bit System

    Freud # 99-472 Beadboard Bit System

    …and much more.* Mills traditional beadboard in a variety of thicknesses and widths.* 32329 includes two slot cutters to rout either 1/4" or 1/16" tongue & groove joints.* Use with any hardwood or softwood to match your project or décor.* Use only with a table mounted router and fence.

    From: $18.97
  18. 18'' Rockler Router Bit Storage Rack

    18'' Rockler Router Bit Storage Rack

    Keep your supply of router bits organized and easily accessible! This galvanized steel rack features keyhole slots 16" on center to allow easy mounting to wall studs or the side of your router table stand.* Holds 27 1/2" shank bits and 13 1/4" shank bits.* 18" long.

    2 Review(s)
    $15.99
  19. Trim Router Table

    Trim Router Table

    …the table allow you to attach an auxiliary clamping strip for securing to any work surface* The 1/4" thick x 5-3/4" diameter acrylic base is pre-drilled to fit most popular trim routers and has 1-1/2" opening* Included T-Knobs let you make quick fence adjustments* High-visibility safety bit guard*…

    9 Review(s)
    $64.49
  20. 6-Piece Router Table Accessory Kits

    6-Piece Router Table Accessory Kits

    …the table, while the third mounts to the table and keeps your work against the fence. Choose the Size Below that Best Fits Your Rockler Router Table Plate:* Standard Size: 3-1/4" Bit Opening. Fits Plate A and B.* Large Size: 3-11/16" Bit Opening. Fits Plate C and D, large opening plates, Router Lift…

    1 Review(s)
    $49.99
  21. Rockler Router Table Box Joint Jig

    Rockler Router Table Box Joint Jig

    router table with a standard 3/4" miter slot, this jig features a smooth-sliding backer sled and three precision-machined aluminum indexing keys to give you air-tight joints with either 1/4", 3/8" or 1/2" spacing. Works with stock up to 3/4" thick. * For compatibility, the near edge of your table's

    60 Review(s)
    $79.99
  22. Rockler High Pressure Laminate Router Table, Fence, & FX Router Lift

    Rockler High Pressure Laminate Router Table, Fence, & FX Router Lift

    Our High Pressure Laminate Router Tables are newly redesigned with a dual-track miter slot in the table and an included dust port. Plus, these packages include our acclaimed Router Lift FX for above-table adjustments and bit changes! New 3/4" T-profile miter slot allows you to use precision…

    $399.99
  23. Festool CMS-GE Router Table

    Festool CMS-GE Router Table

    …routing. Pin features an arm thatextends all the way to the router bit bearing for gap-free support. Also Available Separately:* Festool Miter Gauge 488451 (Rockler 45173)* Festool Sliding Table 492100 (Rockler 43850)* Festool Table Extension 492092 (Rockler 48481)* Festool Dust Extraction Hose…

    $1225.00
  24. Rockler Router Table Fence

    Rockler Router Table Fence

    Our Rockler Router Table Fence boasts the same features and tool-free adjustability as the original, PLUS an included dust port, bright, high-visibility bit guard and fence faces, and a gleaming black aluminum backbone. At 32" long, this extruded backer provides plenty of reference surface for…

    $84.99
  • Items 1 - 24 of 283
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X