Table Saw Blades

  • Items 1 - 24 of 193
  • Page:
    1. 1
    2. 2
    3. 3
  1. 10'' x 40T ATB Forrest Woodworker II General Purpose Blade

    10'' x 40T ATB Forrest Woodworker II General Purpose Blade

    …sanding not required). For another option in the Forrest Woodworker II series, check out the Thin Kerf General Purpose Blade. The Woodworker II is a top-quality general purpose blade. Double hard and 40% stronger C-4 carbide will give up to 300% longer life between sharpenings. Specifications:* 40…

    23 Review(s)
    $119.99
  2. Freud Box Joint Cutter Set

    Freud Box Joint Cutter Set

    Freud has developed a method of creating perfectly square, flat-bottom box joints, on a table saw without using a dado set or saw blade. The SBOX8 Box Joint Cutter Set makes box joint construction easy, producing strong, accurate joints without shims or awkward adjustments. This patent pending…

    1 Review(s)
    $94.97
  3. Freud® LU87R Industrial Thin Kerf Rip Saw Blades

    Freud® LU87R Industrial Thin Kerf Rip Saw Blades

    This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD® coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4" to…

    9 Review(s)
    From: $32.97
  4. 10'' x 40T Forrest Woodworker II Thin Kerf General Purpose Blade

    10'' x 40T Forrest Woodworker II Thin Kerf General Purpose Blade

    table saw blade produces smooth as sanded rips and crosscuts in hardwoods up to 2" thick. For another option in the Forrest Woodworker II series, check out the ATB General Purpose Blade. The Woodworker II is a top-quality general purpose blade. This thin kerf version of the WWII is perfect for table

    20 Review(s)
    $119.99
  5. Freud® LU88R Industrial Thin Kerf Fine Finish Crosscut Saw Blades

    Freud® LU88R Industrial Thin Kerf Fine Finish Crosscut Saw Blades

    …coated blade gives new life to underpowered saws and produces smooth crosscuts in hardwoods, softwoods and moldings. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. Thin kerf blades remove less material than standard carbide blades, thus requiring…

    1 Review(s)
    From: $49.47
  6. Freud 10'' Thin Kerf Sawblades - 24T General Purpose and 80T Crosscut (Pack of 2)

    Freud 10'' Thin Kerf Sawblades - 24T General Purpose and 80T Crosscut (Pack of 2)

    This twin pack of Freud blades includes a 24T General Purpose Blade for ripping and dimensioning, and an 80T Ultra-Fine Crosscut Blade for the fine finishing cuts on intricate molding and joinery. Both blades feature thin-kerf technology, which is less taxing on your saw, and generates less waste.…

    $119.99 $79.99

    SAVE 33%

  7. Freud® LU83R Industrial Thin Kerf Heavy Duty Combination Saw Blades

    Freud® LU83R Industrial Thin Kerf Heavy Duty Combination Saw Blades

    …in standard blades. With this combination blade, there is no need for stabilizers. The Perma-SHIELD® coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD® blades resist binding in large volume cutting, reducing subsequent blade warp. The…

    24 Review(s)
    From: $49.97
  8. Freud® LU73M Industrial Cabinetmaker's Crosscut Saw Blades

    Freud® LU73M Industrial Cabinetmaker's Crosscut Saw Blades

    …from 1/2" to 2-3/4" thick. The Silver I.C.E.™ (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.

    From: $62.97
  9. Irwin 10" x 24T Marples ATB Rip Saw Blade

    Irwin 10" x 24T Marples ATB Rip Saw Blade

    …Irwin Marples 10" 24T Saw Blade also features a thin kerf design, which reduces dust and material waste, and allows for use on all table saws, from lower-powered portable machines to high-end cabinet saws. IRWIN is proud to introduce a full line of fine woodworking saw blades that are manufactured…

    $34.99
  10. Freud® LM72M Industrial Heavy Duty Rip Saw Blades

    Freud® LM72M Industrial Heavy Duty Rip Saw Blades

    …Cooling Element) coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor. Also available with the premium Perma-SHIELD® coating.

    From: $51.47
  11. Irwin 10" x 50T Marples ATB+R Combination Saw Blade

    Irwin 10" x 50T Marples ATB+R Combination Saw Blade

    …On: Table Saw, Miter Saw. About IRWIN Blades: IRWIN is proud to introduce a full line of fine woodworking saw blades that are manufactured in Italy to the highest standards of precision required for fine woodworking and finish carpentry. These industry leading laser-cut, thin kerf saw blades are…

    7 Review(s)
    $44.99
  12. Freud® 10" x 40T Premier Fusion General Purpose Saw Blade - P410

    Freud® 10" x 40T Premier Fusion General Purpose Saw Blade - P410

    …Fusion blade will tackle any project. The Perma-SHIELD® coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD® blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing…

    8 Review(s)
    $99.97
  13. Freud® 10" x 40T Premier Fusion Thin Kerf General Purpose Saw Blade - P410T

    Freud® 10" x 40T Premier Fusion Thin Kerf General Purpose Saw Blade - P410T

    …cut. One blade does it all. Whether you're ripping or crosscutting, a Premier Fusion blade will tackle any project. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results. The Perma-SHIELD® coating covers the blade plate…

    8 Review(s)
    $79.97
  14. Freud® LU94M Industrial Plastic Saw Blades

    Freud® LU94M Industrial Plastic Saw Blades

    …the cut edge crisp. The Silver I.C.E.™ (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.

    From: $61.47
  15. Forrest 10" x 60T Woodworker I General Purpose Saw Blade

    Forrest 10" x 60T Woodworker I General Purpose Saw Blade

    …general purpose blade that's perfect for table saws under 3HP. The WWI gives you scratch free and polished cuts on stock up to 2" thick. Thin kerf saves wood loss on each cut and reduces power drain on your saw. Perfect for general purpose cutting on non-sliding miter saws and table saws under 3HP.…

    $129.99
  16. Table Saw Blade Holder

    Table Saw Blade Holder

    Store any 10" table saw blade on your shop wall.* With convenient hanging hook.* Includes shop knob and washer to securely fasten blade to holder.* Plastic.

    5 Review(s)
    $8.99
  17. Micro Jig GRR-Ripper® Basic 3D Push Block System GR-100

    Micro Jig GRR-Ripper® Basic 3D Push Block System GR-100

    …the GRR-Ripper serves as a virtual movable saw guard that travels with your hand, rather than a saw guard that is affixed to the back of the table saw, or one that hovers above it. The GRR-Ripper becomes an unyielding barricade between the table saw blade and both of your hands. Maximizing the use…

    25 Review(s)
    $59.99
  18. Freud® LU96R Industrial Thin Kerf Double Sided Laminate Melamine Saw Blades

    Freud® LU96R Industrial Thin Kerf Double Sided Laminate Melamine Saw Blades

    …No scoring blades needeed with this blade! The Perma-SHIELD® coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD® blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing…

    1 Review(s)
    From: $65.97
  19. Freud® LM72R Industrial Heavy Duty Rip Saw Blades

    Freud® LM72R Industrial Heavy Duty Rip Saw Blades

    …standard blades. With this ultimate ripping blade, there is no need for stabilizers. The Perma-SHIELD® coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD® blades resist binding in large volume cutting, reducing subsequent blade warp.…

    7 Review(s)
    From: $57.47
  20. Freud® LU84R Industrial Combination Saw Blades

    Freud® LU84R Industrial Combination Saw Blades

    …standard blades. With this ultimate combination blade, there is no need for stabilizers. The Perma-SHIELD® coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD® blades resist binding in large volume cutting, reducing subsequent blade

    5 Review(s)
    From: $71.47
  21. MagSwitch Resaw Guide Attachment

    MagSwitch Resaw Guide Attachment

    table or cast Iron fence. Angled Infeed/Outfeed to allow for blade drift adjustment. Ideal for resawing on band saws, oscillating spindle sander, or disc sander; and for infeed/outfeed support. Technical Details:* Product Dimensions: 4" x 8-1/2"* Low profile design for use on your smallest tables*

    $25.49
  22. Freud® LU74R Industrial Thin Kerf Ultimate Cut-Off Saw Blades

    Freud® LU74R Industrial Thin Kerf Ultimate Cut-Off Saw Blades

    …covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD® blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing it to spin freely, and eliminates pitch and debris build-up on the blade.

    3 Review(s)
    From: $57.47
  23. Freud® LM74R Industrial Glue Line Rip Saw Blades

    Freud® LM74R Industrial Glue Line Rip Saw Blades

    …standard blades. With this ultimate ripping blade, there is no need for stabilizers. The Perma-SHIELD® coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD® blades resist binding in large volume cutting, reducing subsequent blade warp.…

    9 Review(s)
    From: $69.97
  24. Irwin 10" x 84T Marples TCG Laminate Saw Blade

    Irwin 10" x 84T Marples TCG Laminate Saw Blade

    …a thing of the past. The blade also features a thin kerf design, which reduces dust and material waste, and allows for use on all table saws, from lower-powered portable machines to high-end cabinet saws. IRWIN is proud to introduce a full line of fine woodworking saw blades that are manufactured in…

    $69.99
  • Items 1 - 24 of 193
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X