Table Saw Jig

  • Items 1 - 24 of 52
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Taper / Straight Line Jig

    Rockler Taper / Straight Line Jig

    …Perfect for chair legs, table legs and more. Jig fits snug in any standard 3/8" x 3/4" miter slot and features a large, ergonomic handle for smooth push-action performance throughout the cut. Plus, with the miter bar removed it doubles as a stable straight line ripping jig. * Measures 31-5/8" x…

    45 Review(s)
    $77.99 $57.99

    SAVE 26%

  2. Rockler Thin Rip Tablesaw Jig

    Rockler Thin Rip Tablesaw Jig

    jig allows you to rip thin strips on the left side of the blade, eliminating the danger of pushing narrow strips between the saw and fence. Since the strip is not trapped between the blade and fence, there is also less risk of binding and kickback. It's simple to use; a single knob locks the jig

    104 Review(s)
    $26.99
  3. Freud Box Joint Cutter Set

    Freud Box Joint Cutter Set

    Freud has developed a method of creating perfectly square, flat-bottom box joints, on a table saw without using a dado set or saw blade. The SBOX8 Box Joint Cutter Set makes box joint construction easy, producing strong, accurate joints without shims or awkward adjustments. This patent pending…

    1 Review(s)
    $94.97
  4. Cutoff Platform for Rockler Cross Cut Sled

    Cutoff Platform for Rockler Cross Cut Sled

    …accessory secures to smaller table saws, providing zero-clearance workpiece support for safe, splinter-free cuts. The 1/2" thick MDF platform features a smooth sliding melamine surface and a locking aluminum miter bar. Use only with our Crosscut Sled for Portable Table Saws. This platform zeroes out…

    2 Review(s)
    $28.99 $9.99

    SAVE 66%

  5. Woodsmith Box Joint Jig

    Woodsmith Box Joint Jig

    …Woodsmith Box Joint Jig attaches to any miter gauge and works on any table saw or router table. The box joint jig provides an easy, accurate way to get perfect-fitting box joints. Use the Freud Box Joint Cutter Set (sold separately, 27371) to make precise joints on your table saw, or our 4-Piece…

    16 Review(s)
    $119.99
  6. Rockwell® Blade Runner™ Jig Saw, Multi-Purpose Precision Cutter

    Rockwell® Blade Runner™ Jig Saw, Multi-Purpose Precision Cutter

    Get more bang for your buck with a saw that does it all! This multi-purpose saw makes straight cuts or curved cuts on everything from wood and metal to ceramic tile, plastic, PVC and more.* Use it in your shop or take it to your job site - weighs just over 17 lbs.* Uses standard T-shank jigsaw…

    21 Review(s)
    $178.99
  7. Phenolic Table Saw Insert Kit

    Phenolic Table Saw Insert Kit

    …one pre-cut plate! Just rout to the size you need with a Shear Cutting Flush Trim Bit (24740, sold separately). Also works great for band saws, scroll saws, jigs and fences. Phenolic is extremely hard for optimum durability and provides friction-free sliding. It's so hard that traditional drill bits…

    31 Review(s)
    $31.99
  8. Heavy-Duty Tenoning Jig

    Heavy-Duty Tenoning Jig

    Safety, accuracy and repeatability are the hallmarks of this heavy-duty tenoning jig. Designed to fit any table saw with a 3/4" x 3/8" miter groove, this jig will hold your stock in precise position. The adjustable back stop will support stock from 0 degrees to 45 degrees. The width of the cut is…

    68 Review(s)
    $117.99
  9. UHMW Plastic Jig Stock - 3/4'' Thick

    UHMW Plastic Jig Stock - 3/4'' Thick

    …is your best material choice for making jigs and fixtures for your table saw, router table, drill press, etc. UHMW is a linear high density polyethylene that's 10x heavier than regular high-density polyethylene giving you a rock-solid base for your jig or fixture. UHMW has a low coefficient of…

    8 Review(s)
    $30.49
  10. Rockler Universal Fence Clamps

    Rockler Universal Fence Clamps

    These compact, lightweight Fence Clamps allow you to secure a huge variety of shop-made auxiliary fences to your existing fences without having the clamp interfere with your work. The clamp arm simply fits into a 3/8" hole in the top of the auxiliary fence, keeping it out of the way. That means no…

    286 Review(s)
    $19.49
  11. Incra® Miter Slider Bars

    Incra® Miter Slider Bars

    …action and can be locked in place for stationary table saw and router table jigs. Make your own featherboards, small and large crosscut boxes, 45° miter jig and your own jig designs. Won't warp, swell or shrink (unlike wooden runners), so the jigs you build will fit perfectly time after time.…

    From: $18.59
  12. Magswitch® Workholding System Starter Kit

    Magswitch® Workholding System Starter Kit

    …also be used in your own jigs and fixtures.* Holds stock for controlled ripping, routing, shaping, jointing and more* Fast setups with precise positioning* Small footprint makes it ideal for use with small tables, band saws and fences* Can be used anywhere on your table or fence (steel or cast…

    1 Review(s)
    $76.49
  13. Rockler 45 Degree Miter Sled

    Rockler 45 Degree Miter Sled

    …Pre-installed adjustable nylon pins provide a no-slop fit to the miter track.* Through-slots in the base allow you to securely clamp moldings at table level.* Can be easily drilled to add extended fences and stops.* High-impact polycarbonate ensures durability and low-friction sliding.* Fits a…

    85 Review(s)
    $25.99 $14.99

    SAVE 42%

  14. Rockler Cove Cutting Table Saw Jig

    Rockler Cove Cutting Table Saw Jig

    Cut custom coves on your table saw without juggling all those fences and clamps! This jig includes everything you need for safe, easy coving in one easy-to-use package. Accepts stock up to 7" wide and 1-1/2" thick, enabling you to cut huge crown moldings that would cost a fortune from the…

    16 Review(s)
    $89.99
  15. Micro Jig MJ Splitter™ for Table Saw

    Micro Jig MJ Splitter™ for Table Saw

    Improve Table Saw Safety! The affordable Micro Jig MJ Splitter™ system is simple to use, exact, and extremely effective. Produces virtually burn-free cuts! Technical Details:* Low-profile splitter also serves as a mini featherboard for the keeper piece behind the saw blade.* Designed to be…

    14 Review(s)
    From: $30.99
  16. Micro Jig GRR-Ripper® Basic 3D Push Block System GR-100

    Micro Jig GRR-Ripper® Basic 3D Push Block System GR-100

    …across the entire width of the Micro Jig GRR-Ripper's body for better control. Also includes replaceable push foot.* Micro Jig GRR-Ripper instructional DVD covers over 30 applications of the Micro Jig GRR-Ripper System on four different machines: table saw, router, jointer and band saw. 120 minutes.

    25 Review(s)
    $59.99
  17. Leg Up Table Saw Panel-Lifter

    Leg Up Table Saw Panel-Lifter

    …with the innovative, labor-saving Leg Up Table Saw Panel-Lifter! Easily mounts to your table allowing you to raise sheet goods onto your table saw. Simply place any sheet of wood into the hook and, in one controlled motion, flip the sheet onto your table saw. In one easy motion you're ready to cut…

    2 Review(s)
    $39.99
  18. Shop Improvements Book

    Shop Improvements Book

    …Magazine. 60 outstanding accessory and jig articles will fill your mind with ideas for things to add to your shop. Topics include workbenches, router jigs and fences, table saw extension tables, sawhorses and support stands, clamp and lumber racks, dovetailing jigs, storage solutions and more!

    $19.95
  19. 18" Universal Track for Magswitch Workholding System

    18" Universal Track for Magswitch Workholding System

    …Universal Base and MagJigs (each sold separately). The Magswitch Track is truly universal. It accommodates all hardware on the market. Make your own jigs, fixtures, stops, fences, zero-clearance fences and more! Mounts to miter gauges and fences, as well. Accepts all standard mounting hardware!* For…

    $32.49
  20. Master Plate with Super Bar

    Master Plate with Super Bar

    Tune up your table saw to the peak of perfection. Tune up your table saw to the peak of perfection. Get the highest degree of accuracy with this combination Master Plate and Super Bar. Together, they help you tune-up, calibrate, and align your table saw to within 1/1000 of an inch! What's more, it…

    10 Review(s)
    From: $49.99
  21. Incra Build It Starter Kit

    Incra Build It Starter Kit

    …plus the plans for 5 useful workshop jigs. Warm up with the disc sander jig or the squaring jig for fast results. Then try the coping sled for clean, square rail-ends, throw the crosscut sled together for angled cuts on the table saw or build the tenoning jig for crisp tenons in almost no time. The…

    2 Review(s)
    $146.99
  22. Bench Dog® Single Feather-Loc®, Multi-Purpose Featherboard

    Bench Dog® Single Feather-Loc®, Multi-Purpose Featherboard

    …binding, and bent blades. Use it on the table saw to keep long stock tight against the rip fence, or attach it to your fence to prevent workpieces from lifting during a cut. It features integral fittings for T-slots and includes a Miter Slot Adapter for tables and fences with standard 3/8" x 3/4"…

    14 Review(s)
    $16.79
  23. 36" Universal Track for Magswitch Workholding System

    36" Universal Track for Magswitch Workholding System

    …Universal Base and MagJigs (each sold separately). The Magswitch Track is truly universal. It accommodates all hardware on the market. Make your own jigs, fixtures, stops, fences, zero-clearance fences and more! Mounts to miter gauges and fences, as well. Accepts all standard mounting hardware!* For…

    $65.99
  24. Rockler Incra Universal Precision Positioning Jig

    Rockler Incra Universal Precision Positioning Jig

    …alignment and repeatability on virtually any power tool in your shop, including router table, table saw, drill press and band saw.* Includes box joint template and dovetail & corner post template. Simply set the jig to the color-coded reference marks and make your cuts. No math, no measurements,…

    2 Review(s)
    $69.99
  • Items 1 - 24 of 52
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X