Table Saw Jigs

  • Items 1 - 24 of 54
  • Page:
    1. 1
    2. 2
    3. 3
  1. Cove Cutting Table Saw Jig

    Cove Cutting Table Saw Jig

    Cut custom coves on your table saw without juggling all those fences and clamps! This jig includes everything you need for safe, easy coving in one easy-to-use package. Accepts stock up to 7" wide and 1-1/2" thick, enabling you to cut huge crown moldings that would cost a fortune from the…

    16 Review(s)
    $89.99
  2. Thin Rip Tablesaw Jig

    Thin Rip Tablesaw Jig

    jig allows you to rip thin strips on the left side of the blade, eliminating the danger of pushing narrow strips between the saw and fence. Since the strip is not trapped between the blade and fence, there is also less risk of binding and kickback. It's simple to use; a single knob locks the jig

    104 Review(s)
    $26.99
  3. Taper / Straight Line Jig

    Taper / Straight Line Jig

    …Perfect for chair legs, table legs and more. Jig fits snug in any standard 3/8" x 3/4" miter slot and features a large, ergonomic handle for smooth push-action performance throughout the cut. Plus, with the miter bar removed it doubles as a stable straight line ripping jig. * Measures 31-5/8" x…

    44 Review(s)
    $77.99
  4. Woodsmith Box Joint Jig

    Woodsmith Box Joint Jig

    …Woodsmith Box Joint Jig attaches to any miter gauge and works on any table saw or router table. The box joint jig provides an easy, accurate way to get perfect-fitting box joints. Use the Freud Box Joint Cutter Set (sold separately, 27371) to make precise joints on your table saw, or our 4-Piece…

    16 Review(s)
    $119.99
  5. Heavy-Duty Tenoning Jig

    Heavy-Duty Tenoning Jig

    Safety, accuracy and repeatability are the hallmarks of this heavy-duty tenoning jig. Designed to fit any table saw with a 3/4" x 3/8" miter groove, this jig will hold your stock in precise position. The adjustable back stop will support stock from 0 degrees to 45 degrees. The width of the cut is…

    68 Review(s)
    $117.99
  6. Portable Cross Cut Sled

    Portable Cross Cut Sled

    saws, including the following:* Bosch BO-4100* Rigid TS2410LS* Makita 2704* DeWalt DEDW744* Porter Cable PC-38125 Note: For compatibility, the right edge of your table saw's left-hand mitertrack (in which the sled would mount) must be between 5-3/16" and 6-5/8"from the left edge of the saw blade.…

    13 Review(s)
    $119.99
  7. Incra Build It Starter Kit

    Incra Build It Starter Kit

    …plus the plans for 5 useful workshop jigs. Warm up with the disc sander jig or the squaring jig for fast results. Then try the coping sled for clean, square rail-ends, throw the crosscut sled together for angled cuts on the table saw or build the tenoning jig for crisp tenons in almost no time. The…

    2 Review(s)
    $146.99
  8. Precision Taper Jig

    Precision Taper Jig

    A scaled cutting jig on a table saw to cut accurate tapers. Makes taper cutting easy and accurate. Cut tapers up to 3" per foot/15° slope. Graduated metal scale makes it easy to cut tapers at desired angles. Easy to use and easy to adjust. Offers measurements in degrees and inches per foot of…

    54 Review(s)
    $23.99
  9. Bench Dog® Push-Loc

    Bench Dog® Push-Loc

    …see your workpiece better, and you won't bang your knuckles on the blade guard. The offset also allows you to use it horizontally on the router table. * Made in USA.* Offset handle keeps your hand out of harm's way and improves visibility.* Ergonomic "no-slip" grip.* Rubber sole helps prevent…

    7 Review(s)
    $14.69
  10. UHMW Plastic Jig Stock-3/8 Inch Thick

    UHMW Plastic Jig Stock-3/8 Inch Thick

    …is your best material choice for making jigs and fixtures for your table saw, router table, drill press, etc. UHMW is a linear high density polyethylene that's 10x heavier than regular high-density polyethylene giving you a rock-solid base for your jig or fixture. UHMW has a low coefficient of…

    8 Review(s)
    From: $26.29
  11. Rockwell® Blade Runner™ Jig Saw, Multi-Purpose Precision Cutter

    Rockwell® Blade Runner™ Jig Saw, Multi-Purpose Precision Cutter

    Get more bang for your buck with a saw that does it all! This multi-purpose saw makes straight cuts or curved cuts on everything from wood and metal to ceramic tile, plastic, PVC and more.* Use it in your shop or take it to your job site - weighs just over 17 lbs.* Uses standard T-shank jigsaw…

    21 Review(s)
    $178.99
  12. 45 Degree Miter Sled

    45 Degree Miter Sled

    …Pre-installed adjustable nylon pins provide a no-slop fit to the miter track.* Through-slots in the base allow you to securely clamp moldings at table level.* Can be easily drilled to add extended fences and stops.* High-impact polycarbonate ensures durability and low-friction sliding.* Fits a…

    85 Review(s)
    $25.99
  13. Incra® Miter Slider Bars

    Incra® Miter Slider Bars

    …action and can be locked in place for stationary table saw and router table jigs. Make your own featherboards, small and large crosscut boxes, 45° miter jig and your own jig designs. Won't warp, swell or shrink (unlike wooden runners), so the jigs you build will fit perfectly time after time.…

    From: $18.59
  14. Leg Up Table Saw Panel-Lifter

    Leg Up Table Saw Panel-Lifter

    …with the innovative, labor-saving Leg Up Table Saw Panel-Lifter! Easily mounts to your table allowing you to raise sheet goods onto your table saw. Simply place any sheet of wood into the hook and, in one controlled motion, flip the sheet onto your table saw. In one easy motion you're ready to cut…

    2 Review(s)
    $39.99
  15. Bench Dog® Blade-Loc

    Bench Dog® Blade-Loc

    Blade-Loc is a revolutionary blade changing tool that provides safer changes for you and your table saw blades. Most people don't realize that using a piece of scrap wood can bend the blade, enough to leave scratch marks and tear-out in delicate panels. Blade-Loc evenly grips the blade around its…

    12 Review(s)
    $12.59
  16. Incra Universal Precision Positioning Jig

    Incra Universal Precision Positioning Jig

    …alignment and repeatability on virtually any power tool in your shop, including router table, table saw, drill press and band saw.* Includes box joint template and dovetail & corner post template. Simply set the jig to the color-coded reference marks and make your cuts. No math, no measurements,…

    2 Review(s)
    $69.99
  17. Phenolic Table Saw Insert Kit

    Phenolic Table Saw Insert Kit

    …one pre-cut plate! Just rout to the size you need with a Shear Cutting Flush Trim Bit (24740, sold separately). Also works great for band saws, scroll saws, jigs and fences. Phenolic is extremely hard for optimum durability and provides friction-free sliding. It's so hard that traditional drill bits…

    31 Review(s)
    $31.99
  18. Magswitch® Ultimate Thin Stock Jig/Rip Guide Attachment

    Magswitch® Ultimate Thin Stock Jig/Rip Guide Attachment

    …feed on a table saw. Enhances safety by keeping your fingers away from the blade while also minimizing chatter for clean cuts. This tool features core advantages of Magswitch including fast, strong set up anywhere on steel table or cast Iron fence. Low profile design for use on your smallest tables.

    $21.99
  19. Micro Jig Splitter™ SteelPRO System, Thin Kerf

    Micro Jig Splitter™ SteelPRO System, Thin Kerf

    Micro Jig Splitter™ SteelPro is constructed from a 100% polycarbonate shell and reinforced with a solid stainless steel core. The SteelPRO employs another groundbreaking innovation for table saw safety and efficacy: The Dual Splitter. This allows the splitters to control the pressure on the…

    3 Review(s)
    $39.99
  20. Freud Box Joint Cutter Set

    Freud Box Joint Cutter Set

    Freud has developed a method of creating perfectly square, flat-bottom box joints, on a table saw without using a dado set or saw blade. The SBOX8 Box Joint Cutter Set makes box joint construction easy, producing strong, accurate joints without shims or awkward adjustments. This patent pending…

    1 Review(s)
    $94.97
  21. Magswitch T-Handle Magnetic Workholding Square

    Magswitch T-Handle Magnetic Workholding Square

    …for reinforcing a fence anywhere on a steel table!* 90° corners for squaring.* Switches in and out of fixtures with ease.* Does not included Resaw Guide shown Magsquares allow for the attachment of all types of fixtures, or shop made jigs for quick connect/disconnect on bandsaws, tablesaws,…

    2 Review(s)
    $62.99
  22. Universal Fence Clamps

    Universal Fence Clamps

    These compact, lightweight Fence Clamps allow you to secure a huge variety of shop-made auxiliary fences to your existing fences without having the clamp interfere with your work. The clamp arm simply fits into a 3/8" hole in the top of the auxiliary fence, keeping it out of the way. That means no…

    286 Review(s)
    $19.49
  23. 17-Piece Universal T-Track Kit

    17-Piece Universal T-Track Kit

    Universal T-Track boasts a unique stacked-slot design that allows you to attach any accessory with 1/4" T-bolts, 5/16" T-bolts, or 1/4" Hex-bolts. With this full-service kit you get: * One 4' length of Universal T-Track* Two 3-1/2" x 5/16" T-bolts* Two 1" x 5/16" T-bolts* Two 1-1/2" x 5/16" T-bolts*…

    45 Review(s)
    $31.99
  24. Micro Jig MJ Splitter™ for Table Saw

    Micro Jig MJ Splitter™ for Table Saw

    Improve Table Saw Safety! The affordable Micro Jig MJ Splitter™ system is simple to use, exact, and extremely effective. Produces virtually burn-free cuts! Technical Details:* Low-profile splitter also serves as a mini featherboard for the keeper piece behind the saw blade.* Designed to be…

    14 Review(s)
    From: $30.99
  • Items 1 - 24 of 54
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X