Table Saw Miter Jig

  • Grid List
  • Page:
    1. 1
  • Items 1 - 23 of 23
  • Page:
    1. 1
  1. Rockler 45 Degree Miter Sled

    Rockler 45 Degree Miter Sled

    …both pieces reference off a perfect 90&deg angle, the miters will fit perfectly.* Pre-installed adjustable nylon pins provide a no-slop fit to the miter track.* Through-slots in the base allow you to securely clamp moldings at table level.* Can be easily drilled to add extended fences and…

    85 Review(s)
    $25.99 $14.99

    SAVE 42%

  2. Incra Build It Starter Kit

    Incra Build It Starter Kit

    …plus the plans for 5 useful workshop jigs. Warm up with the disc sander jig or the squaring jig for fast results. Then try the coping sled for clean, square rail-ends, throw the crosscut sled together for angled cuts on the table saw or build the tenoning jig for crisp tenons in almost no time. The…

    2 Review(s)
    $146.99
  3. Cutoff Platform for Rockler Cross Cut Sled

    Cutoff Platform for Rockler Cross Cut Sled

    …accessory secures to smaller table saws, providing zero-clearance workpiece support for safe, splinter-free cuts. The 1/2" thick MDF platform features a smooth sliding melamine surface and a locking aluminum miter bar. Use only with our Crosscut Sled for Portable Table Saws. This platform zeroes out…

    2 Review(s)
    $28.99 $9.99

    SAVE 66%

  4. Rockwell® Blade Runner™ Jig Saw, Multi-Purpose Precision Cutter

    Rockwell® Blade Runner™ Jig Saw, Multi-Purpose Precision Cutter

    Get more bang for your buck with a saw that does it all! This multi-purpose saw makes straight cuts or curved cuts on everything from wood and metal to ceramic tile, plastic, PVC and more.* Use it in your shop or take it to your job site - weighs just over 17 lbs.* Uses standard T-shank jigsaw…

    21 Review(s)
    $178.99
  5. Rockler Aluminum Miter Bar

    Rockler Aluminum Miter Bar

    …on table saws, router tables, workbenches and more! These solid aluminum bars have nylon set screws in the miter bar that adjust in or out for a perfect fit in any standard 3/4" x 3/8" miter slot. Available individually in 18", 24" and 36" lengths.* Great for shop-made crosscut jigs, cutoff tables,

    12 Review(s)
    From: $19.99
  6. Rockler Thin Rip Tablesaw Jig

    Rockler Thin Rip Tablesaw Jig

    …eliminating the danger of pushing narrow strips between the saw and fence. Since the strip is not trapped between the blade and fence, there is also less risk of binding and kickback. It's simple to use; a single knob locks the jig into the miter track and locks your setting at the same time. Ball…

    104 Review(s)
    $26.99
  7. Woodsmith Box Joint Jig

    Woodsmith Box Joint Jig

    …Woodsmith Box Joint Jig attaches to any miter gauge and works on any table saw or router table. The box joint jig provides an easy, accurate way to get perfect-fitting box joints. Use the Freud Box Joint Cutter Set (sold separately, 27371) to make precise joints on your table saw, or our 4-Piece…

    16 Review(s)
    $119.99
  8. Woodworker's Journal Workshop Projects CD

    Woodworker's Journal Workshop Projects CD

    …Outfeed/Assembly Table* Adjustable Dado Jig* Miter Saw Station* Adjustable Box Joint Jig* All-Purpose Shop Table* Adjustable V-block Jig* Ultimate Sharpening Station* Quick and Easy Band Saw Fence* Tilting Table for the Drill Press* Shop-built Panel Saw* Ultimate Fluting Jig* Fire-retardant…

    $14.99
  9. Heavy-Duty Tenoning Jig

    Heavy-Duty Tenoning Jig

    Safety, accuracy and repeatability are the hallmarks of this heavy-duty tenoning jig. Designed to fit any table saw with a 3/4" x 3/8" miter groove, this jig will hold your stock in precise position. The adjustable back stop will support stock from 0 degrees to 45 degrees. The width of the cut is…

    68 Review(s)
    $117.99
  10. Incra® Miter Slider Bars

    Incra® Miter Slider Bars

    …repeatability! Extruded aluminum miter bar has adjustable aluminum runner for perfect sliding action and can be locked in place for stationary table saw and router table jigs. Make your own featherboards, small and large crosscut boxes, 45° miter jig and your own jig designs. Won't warp, swell…

    From: $18.59
  11. Rockler Miter Slot Hardware Kit

    Rockler Miter Slot Hardware Kit

    Make your own jigs and hold-downs!* Excellent for attaching featherboards, hold-downs and special jigs to your table saw, router table, disc sander or any other tool with a standard 3/4" wide x 3/8" deep miter gauge slot. Hardware kit allows you to make your own jigs and hold-downs. * 4-3/4" long…

    27 Review(s)
    $7.99
  12. 18" Universal Track for Magswitch Workholding System

    18" Universal Track for Magswitch Workholding System

    …separately). The Magswitch Track is truly universal. It accommodates all hardware on the market. Make your own jigs, fixtures, stops, fences, zero-clearance fences and more! Mounts to miter gauges and fences, as well. Accepts all standard mounting hardware!* For use with Magswitch Workholding System…

    $32.49
  13. Rockler Taper / Straight Line Jig

    Rockler Taper / Straight Line Jig

    …Perfect for chair legs, table legs and more. Jig fits snug in any standard 3/8" x 3/4" miter slot and features a large, ergonomic handle for smooth push-action performance throughout the cut. Plus, with the miter bar removed it doubles as a stable straight line ripping jig. * Measures 31-5/8" x…

    45 Review(s)
    $77.99 $57.99

    SAVE 26%

  14. Master Plate with Super Bar

    Master Plate with Super Bar

    …replaces your saw blade and bolts into a 5/8" or 1" arbor to provide a full 10" of near-perfect flatness for aligning your equipment. The Super Bar jig has an-onboard precision dial indicator that measures alignment as it slides in the miter gauge slot. This enables you to keep the saw blade…

    10 Review(s)
    From: $49.99
  15. Bench Dog® Tandem Feather-Loc®

    Bench Dog® Tandem Feather-Loc®

    …this tough polymer attachment on 1/4" T-tracks or standard miter slots to secure tall stock for safe, clean cutting. Great for edge routing tall panels, resawing stock on the band saw, or ensuring chatter-free cuts on the table saw. Technical Details:* Ergonomic T-knobs make for comfortable…

    2 Review(s)
    $37.79
  16. Rockler Cove Cutting Table Saw Jig

    Rockler Cove Cutting Table Saw Jig

    …Try angling the blade for a truly unique shape. Ingenious clamping system secures the fences using the 3/4" miter slots on the saw table. Large, easy grip knobs make for quick, tool-free setups. Included featherboard kit holds stock firmly to the table for added safety, precision and repeatability.

    17 Review(s)
    $89.99
  17. Micro Jig ZeroPlay™ Guide Bar System

    Micro Jig ZeroPlay™ Guide Bar System

    …exact width of your miter slot to stabilize your jigs. Guide bars are easily calibrated from the top of jigs and fixtures and are easy to retrofit. Includes two guide bars, two ZeroPlay™ stops and assembly hardware as well as plans to build a table saw crosscutting jig with off cut deflector,…

    4 Review(s)
    $34.99
  18. Bench Dog® Feather-Loc® (Pair) 40-011

    Bench Dog® Feather-Loc® (Pair) 40-011

    …the tension fast, easy, and repeatable. * Slides quickly into 1/4" T-tracks.* Featured on all Bench Dog® Tools fences, as well as most Rockler fences.* Sold as a pair.* Optional Miter Slot Adapter (27603, sold separately) allows you to secure Feather-Loc® to any 3/8" x 3/4" miter slot.

    2 Review(s)
    $29.39
  19. Micro Jig Microdial Tapering Jig

    Micro Jig Microdial Tapering Jig

    …the jig by lining up your layout marks. The tapering jig is designed to interface seamlessly with the optional Grr-Ripper GR-200 (30737, sold separately) for the ultimate in safety and versatility. Technical Details:* Ideal for use with your table saw, but can also be used with a router table for…

    $139.99
  20. Bench Dog® Single Feather-Loc®, Multi-Purpose Featherboard

    Bench Dog® Single Feather-Loc®, Multi-Purpose Featherboard

    …binding, and bent blades. Use it on the table saw to keep long stock tight against the rip fence, or attach it to your fence to prevent workpieces from lifting during a cut. It features integral fittings for T-slots and includes a Miter Slot Adapter for tables and fences with standard 3/8" x 3/4"…

    14 Review(s)
    $16.79
  21. 36" Universal Track for Magswitch Workholding System

    36" Universal Track for Magswitch Workholding System

    …separately). The Magswitch Track is truly universal. It accommodates all hardware on the market. Make your own jigs, fixtures, stops, fences, zero-clearance fences and more! Mounts to miter gauges and fences, as well. Accepts all standard mounting hardware!* For use with Magswitch Workholding System…

    $65.99
  22. Mag-Dro® Mitre Slot Base

    Mag-Dro® Mitre Slot Base

    …quickly and easily to any caliper and fits in the 3/4" slot on your table saw, router, bandsaw, and more.* Fits most 6" calipers* Connects and disconnects to your caliper in seconds* Can be used in a variety of 3/4" table slots or clamped or screwed to a flat surface* Enables fast and precise…

    4 Review(s)
    $8.99
  23. Woodworker's Journal 2013 Annual Collection CD

    Woodworker's Journal 2013 Annual Collection CD

    …this CD, along with tool coverage on 15"-20" planers, portable 10" table saws, battery-powered chainsaws, heavy-duty drill/drivers, and more. Learn techniques like mitering perfect doors, pyrography or using magnets for jigs and tricks in the shop. You'll find all this, plus lots more great…

    $14.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 23 of 23
  • Page:
    1. 1
Feedback X