Template Router Bits

  • Items 1 - 24 of 87
  • Page:
    1. 1
    2. 2
    3. 3
  1. Freud® Top Bearing Flush Trim Router Bits - 1/4" Shank

    Freud® Top Bearing Flush Trim Router Bits - 1/4" Shank

    …bearings on these router bits make them ideal for grooving, lettering and dadoes, as well as any other template work where the template is mounted on the top face of the workpiece. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as…

    From: $22.97
  2. Rockler Pattern Flush Trim Router Bits - 1/2" Shank

    Rockler Pattern Flush Trim Router Bits - 1/2" Shank

    …guides on our Pattern Flush Trim Bits are located on the shank side of the blade, and have the same diameter as the blade, making them the perfect choice for template work when the template is fastened on the top side of the material (if using a hand-held router in the conventional way). This allows…

    1 Review(s)
    From: $27.59
  3. Rockler Double Bearing Shear Flush Trim Router Bit - 3/4" Dia x 1-1/2" H x 1/2" Shank

    Rockler Double Bearing Shear Flush Trim Router Bit - 3/4" Dia x 1-1/2" H x 1/2" Shank

    …producing a smoother cut than traditional straight-fluted bits. The unique design also helps eliminate tear-out problems that occur when routing end-grain, cross-grain and figured grain on hardwoods. Dual bearings mounted at both top and bottom make this an extremely versatile template routing bit.

    13 Review(s)
    $42.99
  4. Rockler Pattern Router Bit - 1/2" Dia x 1/4" H x 1/4" Shank

    Rockler Pattern Router Bit - 1/2" Dia x 1/4" H x 1/4" Shank

    …straight bit is ideally suited for routing hinge mortises and shallow dadoes. At 1/2" wide, you can rout dadoes in multiple passes to precisely fit stock of almost any thickness. Two flutes for fast, smooth, accurate trim cuts. Ball-bearing guide makes it ideal for pattern or template cutting.…

    5 Review(s)
    $18.99
  5. Freud® Downshear Helix Flush Trim Router Bits - 1/2" Shank

    Freud® Downshear Helix Flush Trim Router Bits - 1/2" Shank

    …as well.* 3/4" diameter body and full 1" or 2" cutting length provide the stability and cutting capacity for thick stock or for routing multiple parts with a template.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on portable or table-mounted routers for template work.

    3 Review(s)
    From: $32.97
  6. Freud® Top Bearing Flush Trim Router Bits - 1/2" Shank

    Freud® Top Bearing Flush Trim Router Bits - 1/2" Shank

    …bearings on these router bits make them ideal for grooving, lettering and dadoes, as well as any other template work where the template is mounted on the top face of the workpiece. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as…

    From: $31.97
  7. Rockler Pattern Flush Trim Router Bits - 1/2" Shank

    Rockler Pattern Flush Trim Router Bits - 1/2" Shank

    Get fast, smooth cutting with this flush cutting bit. Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes, for fast, smooth, accurate trim cuts. Precision ground to close tolerances, easily used for pattern or template cutting.

    21 Review(s)
    From: $26.99
  8. Rockler Piloted Flush Trim Router Bits - 1/4" Shank

    Rockler Piloted Flush Trim Router Bits - 1/4" Shank

    …veneers and laminates flush with the substrate. The cutter can also be used for template work where the template is below the worked material or, alternatively, with a router mounted in a router table where the template is above the worked material. In both cases it is suitable for straight and…

    From: $15.99
  9. Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    …mortises. It's also the ideal bit for pattern routing because when using a guide bushing the best face goes down and templates are attached to the top side. 1/2" shank. Application: Cutting mortises and routing deep blind holes * Freud's solid carbide up spiral bits combine effective chip removal…

    1 Review(s)
    From: $51.47
  10. Guide Bushings-Guide Bushings

    Guide Bushings-Guide Bushings

    …utility of a router template guide bushing. With no moving parts to break, router bushings pump out part after identical part, and are never worse for wear. These guide bushings are available in a wide range of diameters (see below) for different bits, dovetail jigs and other template routing…

    2 Review(s)
    From: $7.79
  11. Rockler Piloted Flush Trim Router Bits - 1/2" Shank

    Rockler Piloted Flush Trim Router Bits - 1/2" Shank

    …veneers and laminates flush with the substrate. The cutter can also be used for template work where the template is below the worked material or, alternatively, with a router mounted in a router table where the template is above the worked material. In both cases it is suitable for straight and…

    From: $17.99
  12. Rockler Inlay System

    Rockler Inlay System

    …acrylic frame holds the inlay template in place and gives your router a stable surface to run on, while the spiral bit, template guide and removable bushing allow you to cut both the inlay and recess with the same template. The system includes a blank acrylic template insert that you can custom-cut…

    4 Review(s)
    $54.99
  13. Rockler Circle/Grommet Templates

    Rockler Circle/Grommet Templates

    …(91372 and 22899).* Made of 1/4" acrylic.* Each template measures 10-7/8" square.* Use double-faced tape (50492) to adhere template to surface, or countersink some holes for screws.* Use with the 5/8" Short-Shank Guide Bushing (specially designed for 1/4" template stock) and a 1/2" spiral upcut bit.

    3 Review(s)
    $37.99
  14. Leigh Router Bit Sets for Isoloc Joint Templates

    Leigh Router Bit Sets for Isoloc Joint Templates

    This 3-pc. sets contain all three Leigh isoloc bits for perfect decorative joints, both standard and inlaid. Includes 5/16", 1/4" and 3/8" bits. (Leigh item 1617I-C) is solid carbide.

    $90.49
  15. Freud® Top and Bottom Bearing Flush Trim Router Bits

    Freud® Top and Bottom Bearing Flush Trim Router Bits

    …for templates placed above or below the work piece, or to trim laminates or veneer perfectly flush with countertops, shelving and other projects. Cuts all hardwoods, softwoods, plastic laminates and veneered plywood. Use on hand-held routers, laminate trimmers, and table-mounted portable routers.

    From: $34.47
  16. Inlay Bushing and Bit with Removable Collar

    Inlay Bushing and Bit with Removable Collar

    You can cut both the inlay and the opening with just one template. The inlay will fit into the opening with absolute precision. Maximum 3/16" depth of cut. Use with Porter Cable, Black and Decker and similar bases. Looking for a simple system to make inlaying faster and easier than ever? Check out…

    9 Review(s)
    $37.99
  17. Freud® Top Bearing Mortising Dado Router Bits - 1/4" Shank

    Freud® Top Bearing Mortising Dado Router Bits - 1/4" Shank

    …mortising bits can be used with templates for perfect accuracy and repeatability. They are designed with deep center gullets for maximum material removal without chip loading. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as…

    0 Review(s)
    From: $22.47
  18. Freud® Up-Spiral Router Bits - 1/4" Shank

    Freud® Up-Spiral Router Bits - 1/4" Shank

    …from mortises. It’s also the ideal bit for pattern routing because the best face goes down while cutting, with templates attached to the top. 1/2" shank. Application: Cutting mortises and routing deep blind holes* Freud’s solid carbide up spiral bits combine effective chip removal with a…

    From: $20.47
  19. MPower CRB7 Edging Trim Kit

    MPower CRB7 Edging Trim Kit

    Router Base (45924, sold separately). Together, they give you the ability to trim solid wood edging or edging tape without having to balance your router on the narrow edge of the material. Instead, the edging trim kit includes a bearing guide that runs against the narrow edge, while the router bit

    $29.99
  20. Rockler Pattern Flush Trim Router Bit - 1/2" Dia x 1" H x 1/4" Shank

    Rockler Pattern Flush Trim Router Bit - 1/2" Dia x 1" H x 1/4" Shank

    Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes, for fast, smooth, accurate trim cuts. Precision ground to close tolerances, easily used for pattern or template cutting.

    $21.99
  21. Rockler Flush Door Trimming Router Bit - 3/4" Dia x 2" H x 1/2" Shank

    Rockler Flush Door Trimming Router Bit - 3/4" Dia x 2" H x 1/2" Shank

    …a full 2" of carbide, this bit is ideally suited for trimming thick entry doors, interior doors and countertops. It features a top-mounted guide bearing, which lets you use templates on the top side. This means better visibility when hand-holding the router. The bit is 3/4" in diameter, and features…

    6 Review(s)
    $44.99
  22. Rockler Interlock Signmaker's Templates - State Park Font Kits

    Rockler Interlock Signmaker's Templates - State Park Font Kits

    …Signmaker's Carbide Router Bit (36676, sold separately) and a router with a perforated base.* 3-3/8" Kit (#43820) requires 5/8" Signmaker's Carbide Router Bit (32443, sold separately) and a router with a perforated base.* The uniquely designed sign making router bits (sold separately) are…

    24 Review(s)
    From: $49.99
  23. Porter-Cable Panel Pilot Router Bit - 1/4" Dia x 25/32" H x 1/4" Shank

    Porter-Cable Panel Pilot Router Bit - 1/4" Dia x 25/32" H x 1/4" Shank

    This Porter Cable 1/4" Panel Pilot Bit is just the thing for cutting template designs, cutting openings for power outlets in drywall, paneling, siding, and a lot more! Use it on hardwoods, softwoods, plywood, MDF, aluminum sheeting, insulation and drywall. * Tipped with micrograin carbide.* Shank…

    $9.99
  24. 4212 Porter-Cable  12'' Dovetail Jig

    4212 Porter-Cable 12'' Dovetail Jig

    template, through and box template, dovetail bit, straight bit, two template guides, two lock nuts and T-handle hex wrench.* Heavy-duty cam-type clamps with sandpaper-backed locking bars provide solid grip of wood.* CNC machined aluminum templates provide superior accuracy.* For use with routers

    $187.99
  • Items 1 - 24 of 87
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X