Tenon Stock

  • Items 1 - 24 of 34
  • Page:
    1. 1
    2. 2
  1. Beadlock® Tenon Stock

    Beadlock® Tenon Stock

    This unique tenon stock is specially designed for our Beadlock® Loose Tenon Joinery System. The Beadlock® joinery system allows you to create joints with mortise and tenon strength without the need for large, expensive machinery. The flutes on the stock increase the amount of precious glue…

    6 Review(s)
    From: $7.99
  2. Heavy-Duty Tenoning Jig

    Heavy-Duty Tenoning Jig

    …accuracy and repeatability are the hallmarks of this heavy-duty tenoning jig. Designed to fit any table saw with a 3/4" x 3/8" miter groove, this jig will hold your stock in precise position. The adjustable back stop will support stock from 0 degrees to 45 degrees. The width of the cut is controlled…

    68 Review(s)
    $117.99
  3. Rockler Beadlock® Pro Joinery Kit

    Rockler Beadlock® Pro Joinery Kit

    …Index lines on the ends of jig, allow you to line up mortise width-wise on the piece.* Handles stock thicknesses of 3/4" and up.* Includes all necessary hardware for cutting 3/8" joints. (Tenon stock sold separately.)* Storage case is molded with additional spacing for optional 1/4" and 1/2" drill…

    32 Review(s)
    $137.99
  4. Festool Domino® Sipo Tenons for XL DF700 Joiner

    Festool Domino® Sipo Tenons for XL DF700 Joiner

    …resists moisture and rot-ideal for outdoor applications.* Solid wood tenons will not expand or telegraph through the surface.* All Domino Tenons feature embossed glue pockets to allow space for excessglue.* 750mm tenon stock can be cut to length as needed-ideal for very deepmortises and non-standard…

    $99.00
  5. Festool Domino® Beech Tenons for XL DF700 Joiner-8mm Width

    Festool Domino® Beech Tenons for XL DF700 Joiner-8mm Width

    …of one specific size. Tenon stock is milled from solid beech hardwood for strength and stability, and will not rotate or telegraph through your mortise cheeks. Tenons feature embossed glue pockets, and precut tenons allow 2mm of space for excess glue. 750mm tenon stock is designed to be cut to…

    From: $52.00
  6. Leigh FMT Pro Frame Mortise and Tenon Jig

    Leigh FMT Pro Frame Mortise and Tenon Jig

    …a plunge router, you can cut strong, perfectly fitting mortise and tenon joints in no time. Easily rout single, double, twin, quadruple or even triple mortise and tenon joints, plus angled and compound-angled joints, in stock up to 3" x 5". Virtually any plunge router will fit and still be available…

    8 Review(s)
    $1,049.00
  7. Leigh M2 Multiple Mortise and Tenon Attachment

    Leigh M2 Multiple Mortise and Tenon Attachment

    …and tenon joints! Leigh's M2, Multiple Mortise and Tenon Attachment brings multiple mortise and tenon joints within easy reach of any woodworker who owns a D4 Dovetail Jig and a plunge router with 1/2" collet. The adjustable guide fingers let you cut multiple joints in virtually any layout, in stock

    $268.99
  8. E-Z Pro Mortise and Tenon Jig

    E-Z Pro Mortise and Tenon Jig

    …Mortise and Tenon Jig! This unique jig sets up quickly on the ends of both pieces of stock, allowing you to cut the mortise and tenon using the same setup for a perfect fit in every joint. Set the center wall for your stock's thickness, align it with the jig, and set the mortise and tenon exactly…

    6 Review(s)
    $159.99
  9. Rockler Beadlock® Tenon Router Bit - 3/8" Dia x 1-3/4" H x 1/2" Shank

    Rockler Beadlock® Tenon Router Bit - 3/8" Dia x 1-3/4" H x 1/2" Shank

    …Beadlock® loose tenon stock - just raid your scrap bin for material. Featuring precision-machined carbide flutes, this bit trims stock to 3/8" widths for a perfect match to your 3/8" Beadlock® mortise. Its sturdy 1/2" shank ensures minimal vibration. You can stock up by running long lengths…

    1 Review(s)
    $51.99
  10. Festool Domino® Beech Tenons for XL DF700 Joiner-10mm Width

    Festool Domino® Beech Tenons for XL DF700 Joiner-10mm Width

    …of one specific size. Tenon stock is milled froms olid beech hardwood for strength and stability, and will not rotate or telegraph through your mortise cheeks. Tenons feature embossed glue pockets, and precut tenons allow 2mm of space for excess glue. 750mm tenon stock is designed to be cut to…

    From: $52.00
  11. Festool Domino® Beech Tenons for XL DF700 Joiner-12mm Width

    Festool Domino® Beech Tenons for XL DF700 Joiner-12mm Width

    …of one specific size. Tenon stock is milled from solid beech hardwood for strength and stability, and will not rotate or telegraph through your mortise cheeks. Tenons feature embossed glue pockets, and precut tenons allow 2mm of space for excess glue. 750mm tenon stock is designed to be cut to…

    From: $52.00
  12. Festool Domino® Beech Tenons for XL DF700 Joiner-14mm Width

    Festool Domino® Beech Tenons for XL DF700 Joiner-14mm Width

    …of one specific size. Tenon stock is milled from solid beech hardwood for strength and stability, and will not rotate or telegraph through your mortise cheeks. Tenons feature embossed glue pockets, and precut tenons allow 2mm of space for excess glue. 750mm tenon stock is designed to be cut to…

    0 Review(s)
    From: $52.00
  13. Rockler 3/8'' Beadlock® Basic Starter Kit

    Rockler 3/8'' Beadlock® Basic Starter Kit

    …accept a special Beadlock® loose tenon.* Ribbed tenon design prevents racking and increases the amount of precious face-grain glue surface. The result is an extremely strong, totally concealed joint. Included shim set allows you to mortise a variety of stock thicknesses, as well as to offset…

    30 Review(s)
    $29.99
  14. Festool Domino ® XL DF700 Joiner (574422)

    Festool Domino ® XL DF700 Joiner (574422)

    …on entry doors and gates, and the large, rugged joints required for outdoor furniture and decking. You can even purchase rot-resistant Sipo tenon stock specifically for outdoor use. The joiner is available alone or as a Set, which includes the Trim Stop and Cross Stop. Stationary machines like…

    $1,250.00
  15. Leigh Louver Door Guides

    Leigh Louver Door Guides

    …can use your FMT to make precise louver doors with standard 1/4" x 1-1/4" louvers at a 45° angle. Matching tenons can be routed on the ends of louver stock or radiused louver stock can be routed to fit the mortise. Sold in left and right matching pairs. Note: New FMT guides not exactly as shown.

    $51.99
  16. Festool DF 500 Q Domino Joiner with New T-Loc Systainer

    Festool DF 500 Q Domino Joiner with New T-Loc Systainer

    …of a biscuit cutter! One plunge creates a perfect, smooth-sided mortise that is precisely sized to accept a DOMINO loose tenon, creating an incredibly strong joint in stock as narrow as 7/8" wide! A universal joinery system with endless applications, the DOMINO is far stronger and more versatile…

    1 Review(s)
    $925.00
  17. Freud® 97-158 3-Pc. Door Router Bit Set - 1" H x 1/2" Shank

    Freud® 97-158 3-Pc. Door Router Bit Set - 1" H x 1/2" Shank

    …Adjustable Quarter Round Rail and Stile Bits, which can mill tenons of any length! Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for any door 5/8"…

    1 Review(s)
    $195.97
  18. The Way to Woodwork DVD Series from Woodworker's Journal

    The Way to Woodwork DVD Series from Woodworker's Journal

    …Chapter 2: Design and Materials* Chapter 3: Harvesting the Parts* Chapter 4: Preparing Stock* Chapter 5: How to make Butt Joints* Chapter 6: Mortise & Tenon: Overview & Marking* Chapter 7: Mortise & Tenon: Hand-Cutting & Fitting* Chapter 8: Mahogany Stool Project* Chapter 9: Finishing & Gluing*…

    $79.99
  19. The Way to Woodwork DVD Series from Woodworker's Journal-Individual Volumes

    The Way to Woodwork DVD Series from Woodworker's Journal-Individual Volumes

    …Chapter 2: Design and Materials* Chapter 3: Harvesting the Parts* Chapter 4: Preparing Stock* Chapter 5: How to make Butt Joints* Chapter 6: Mortise & Tenon: Overview & Marking* Chapter 7: Mortise & Tenon: Hand-Cutting & Fitting* Chapter 8: Mahogany Stool Project* Chapter 9: Finishing & Gluing*…

    1 Review(s)
    $29.99
  20. Powermatic TS29 Shaper, 7-1/2HP 3PH 230/460V with Sliding Table

    Powermatic TS29 Shaper, 7-1/2HP 3PH 230/460V with Sliding Table

    …complete with stock hold-down clamp and a 56" miter fence with flip stop. The large table can easily accommodate a stock feeder for longer production runs.* Sliding table with 4-foot stroke works with miter head, hold-down and fence to accomodate everything from multiple end cuts to tenons* Fully…

    $8,675.99
  21. Router Joinery DVD

    Router Joinery DVD

    …DVD format, this classic Fine Woodworking video workshop takes you right into an expert woodworker's shop. You'll learn why correct setup and good stock preparation are essential to accurate work, and you'll see how to cut common frame and carcase joints using a handheld or table-mounted router. *…

    1 Review(s)
    $20.99
  22. The Way to Woodwork: Woodworking's Critical Path CD from Woodworker's Journal

    The Way to Woodwork: Woodworking's Critical Path CD from Woodworker's Journal

    …taught on the subject of woodworking. Containing over 70 lessons and over a dozen projects, the CD covers everything from selecting and preparing stock; to marking joints, plus cutting them; glue-up; final assembly and finish. You'll find out how to calculate how many board feet you need for a…

    $19.99
  23. Dowelmax Jr. Doweling Jig

    Dowelmax Jr. Doweling Jig

    …that can be completed in as little as 5 minutes, and that are independently destructive test proven to be stronger than comparable mortise and tenon joints. The Dowelmax Jr. device consists of the core components of the world famous Dowelmax Classic and is the best system on the market for creating…

    1 Review(s)
    $99.00
  24. Dowelmax Classic Doweling Jig

    Dowelmax Classic Doweling Jig

    …that can be completed in as little as 5 minutes, and that are independently destructive test proven to be stronger than comparable mortise and tenon joints. The system creates quick, easy accurate and strong joints using 3/8" dowels in virtually any configuration that can be flush, offset, mitered,…

    2 Review(s)
    $249.00
  • Items 1 - 24 of 34
  • Page:
    1. 1
    2. 2
Feedback X