Termite

  • Items 1 - 24 of 29
  • Page:
    1. 1
    2. 2
  • Products (29)
  1. Oneway Termite Hollowing Tool Package

    Oneway Termite Hollowing Tool Package

    …grain, pommels on spindles can be cut unbelievably clean. Package includes #1 (3/8") and #2 (1/2") Termite bits, a mounted sharpening point dressed to the proper angle, a fixture to hold the Termite for grinding, a hex key and a grinding block. Technical Details:* Made from high speed steel.* Bit is…

    2 Review(s)
    $99.79
  2. #2 Replacement Bit for Oneway Termite, 1/2"

    #2 Replacement Bit for Oneway Termite, 1/2"

    1/2" replacement ring bit for the Oneway Termite Hollowing Tool (32788, sold separately).

    $29.39
  3. Red River Gum Burl Turning Blanks

    Red River Gum Burl Turning Blanks

    …dark speckling of Red River Gumburls have made them a favorite choice for decorative turnings and sculpture.The wood is also strong, durable and termite resistant. These turning blanksare available in a range of sizes for small bowls, platters, carvings, bottlestoppers, chess pieces, tool handles,…

    From: $9.99
  4. #3 Accessory Bit for Oneway Termite, 5/8"

    #3 Accessory Bit for Oneway Termite, 5/8"

    This 5/8" accessory ring bit for the Oneway Termite Hollowing Tool (32788, sold separately) offers a broader cutting area for end-grain hollowing and finishing cuts on any flat or curved surface.

    $30.49
  5. Curly Bubinga Sold by the Piece

    Curly Bubinga Sold by the Piece

    …when freshly cut.* Movement: Dimensionally stable. Retains its shape well after machining.* Natural Durability: Naturally resistant to decay and termite attack.* Cutting Resistance: Bubinga can be readily sawn, but due to its density, a slow feed rate is advised.* Working characteristics: Responds…

    1 Review(s)
    From: $16.99
  6. Brown Ebony Turning Blanks

    Brown Ebony Turning Blanks

    …tools very sharp. Turns well. Glues well. Cuts easily. Pilot holes are recommended when screwing. Holds finish well, though its polishing properties may render finish unnecessary.* Polish: Takes an excellent polish.* Natural Durability: Heartwood is very durable. Resists termite attack very well.

    1 Review(s)
    $3.99
  7. Ebony Turning Blanks

    Ebony Turning Blanks

    …and the heartwood is difficult to machine with both hand and power tools. Dulls tools quickly. May tear out while planing if grain is irregular.* Polish: Takes an excellent polish.* Steam-bending properties: Good. * Natural Durability: Heartwood is very durable. Resists termite attack very well.

    5 Review(s)
    From: $7.99
  8. African Mahogany by the Piece-1/8" Thickness

    African Mahogany by the Piece-1/8" Thickness

    …to be one of the most stable timbers.* Durability: High durability, resistant to brown-rot and white rot fungi. Moderately resistant to dry-wood termite attack.* Weathering Properties: Very good - a great choice for boat building.* Planing: The wood is easy to plane, but figured grain may chip and…

    4 Review(s)
    From: $4.99
  9. African Mahogany by the Piece-1/4" Thickness

    African Mahogany by the Piece-1/4" Thickness

    …to be one of the most stable timbers.* Durability: High durability, resistant to brown-rot and white rot fungi. Moderately resistant to dry-wood termite attack.* Weathering Properties: Very good - a great choice for boat building.* Planing: The wood is easy to plane, but figured grain may chip and…

    4 Review(s)
    From: $7.99
  10. African Mahogany by the Piece-1/2" Thickness

    African Mahogany by the Piece-1/2" Thickness

    …to be one of the most stable timbers.* Durability: High durability, resistant to brown-rot and white rot fungi. Moderately resistant to dry-wood termite attack.* Weathering Properties: Very good - a great choice for boat building.* Planing: The wood is easy to plane, but figured grain may chip and…

    4 Review(s)
    From: $6.49
  11. African Mahogany by the Piece-3/4" Thickness

    African Mahogany by the Piece-3/4" Thickness

    …to be one of the most stable timbers.* Durability: High durability, resistant to brown-rot and white rot fungi. Moderately resistant to dry-wood termite attack.* Weathering Properties: Very good - a great choice for boat building.* Planing: The wood is easy to plane, but figured grain may chip and…

    4 Review(s)
    From: $8.49
  12. Bubinga by the Piece-1/8" Thickness

    Bubinga by the Piece-1/8" Thickness

    …when freshly cut.* Movement: Dimensionally stable. Retains its shape well after machining.* Natural Durability: Naturally resistant to decay and termite attack.* Cutting Resistance: Bubinga can be readily sawn, but due to its density, a slow feed rate is advised.* Working characteristics: Responds…

    5 Review(s)
    $13.99
  13. Bubinga by the Piece-1/4" Thickness

    Bubinga by the Piece-1/4" Thickness

    …when freshly cut.* Movement: Dimensionally stable. Retains its shape well after machining.* Natural Durability: Naturally resistant to decay and termite attack.* Cutting Resistance: Bubinga can be readily sawn, but due to its density, a slow feed rate is advised.* Working characteristics: Responds…

    5 Review(s)
    From: $4.99
  14. Bubinga by the Piece-1/2" Thickness

    Bubinga by the Piece-1/2" Thickness

    …when freshly cut.* Movement: Dimensionally stable. Retains its shape well after machining.* Natural Durability: Naturally resistant to decay and termite attack.* Cutting Resistance: Bubinga can be readily sawn, but due to its density, a slow feed rate is advised.* Working characteristics: Responds…

    5 Review(s)
    From: $10.99
  15. Bubinga by the Piece-3/4" Thickness

    Bubinga by the Piece-3/4" Thickness

    …when freshly cut.* Movement: Dimensionally stable. Retains its shape well after machining.* Natural Durability: Naturally resistant to decay and termite attack.* Cutting Resistance: Bubinga can be readily sawn, but due to its density, a slow feed rate is advised.* Working characteristics: Responds…

    5 Review(s)
    From: $11.99
  16. Katalox Lumber by the Piece

    Katalox Lumber by the Piece

    …times as hard as white oak.* Grain/Texture: Very small pores and fine texture. Natural luster.* Rot Resistance: High resistance to decay and termites.* Workability: Difficult to work because of high density. * Moderate to highblunting effect on cutters. * Gluing can be difficult because of high…

    From: $11.99
  17. Spanish Cedar by the Piece

    Spanish Cedar by the Piece

    …Heartwood has high natural resistance to decay. The sapwood is vulnerable to attack by powder-post beetles. Moderate to high resistance to termites.* Working characteristics: Easily worked with both hand tools and machines.* Strength Properties: Medium bending strength, much weaker than White…

    7 Review(s)
    $23.99
  18. Wenge by the Piece-1/8" Thickness

    Wenge by the Piece-1/8" Thickness

    …straight.* Texture: Medium to coarse. * Luster: Low.* Movement: Fairly stable.* Natural Durability: Heartwood is quite durable and resistant to termites. High weather resistance makes Wenge an option for some exterior applications.* Working characteristics: Responds well to machine and hand tools,…

    8 Review(s)
    From: $6.99
  19. Wenge by the Piece-1/4" Thickness

    Wenge by the Piece-1/4" Thickness

    …straight.* Texture: Medium to coarse. * Luster: Low.* Movement: Fairly stable.* Natural Durability: Heartwood is quite durable and resistant to termites. High weather resistance makes Wenge an option for some exterior applications.* Working characteristics: Responds well to machine and hand tools,…

    8 Review(s)
    From: $6.99
  20. Wenge by the Piece-1/2" Thickness

    Wenge by the Piece-1/2" Thickness

    …straight.* Texture: Medium to coarse. * Luster: Low.* Movement: Fairly stable.* Natural Durability: Heartwood is quite durable and resistant to termites. High weather resistance makes Wenge an option for some exterior applications.* Working characteristics: Responds well to machine and hand tools,…

    8 Review(s)
    From: $16.49
  21. Wenge by the Piece-3/4" Thickness

    Wenge by the Piece-3/4" Thickness

    …straight.* Texture: Medium to coarse. * Luster: Low.* Movement: Fairly stable.* Natural Durability: Heartwood is quite durable and resistant to termites. High weather resistance makes Wenge an option for some exterior applications.* Working characteristics: Responds well to machine and hand tools,…

    8 Review(s)
    From: $21.99
  22. Padauk by the Piece-1/8" Thickness

    Padauk by the Piece-1/8" Thickness

    …dimensionally stable. * Durability: The heartwood is exceedingly durable. May last in excess of 25 years in contact with the soil without preservative treatment. Very resistant to termites.* Weathering Properties: Excellent.* Care should be taken to prevent splitting when nailing or screwing.

    12 Review(s)
    From: $5.99
  23. Padauk by the Piece-1/4" Thickness

    Padauk by the Piece-1/4" Thickness

    …dimensionally stable. * Durability: The heartwood is exceedingly durable. May last in excess of 25 years in contact with the soil without preservative treatment. Very resistant to termites.* Weathering Properties: Excellent.* Care should be taken to prevent splitting when nailing or screwing.

    12 Review(s)
    From: $5.99
  24. Padauk by the Piece-1/2" Thickness

    Padauk by the Piece-1/2" Thickness

    …dimensionally stable. * Durability: The heartwood is exceedingly durable. May last in excess of 25 years in contact with the soil without preservative treatment. Very resistant to termites.* Weathering Properties: Excellent.* Care should be taken to prevent splitting when nailing or screwing.

    12 Review(s)
    From: $8.99
  • Items 1 - 24 of 29
  • Page:
    1. 1
    2. 2
Feedback X