Thermal

  • Grid List
  • Page:
    1. 1
  • Items 1 - 21 of 21
  • Page:
    1. 1
  1. Active Thermal Management Small Equipment Cabinet Fan System

    Active Thermal Management Small Equipment Cabinet Fan System

    …heat* Prolongs product life, improves performance and increases reliability* Ventilates cabinets up to 12 cubic feet or sections of cabinets* Manufacturer: Active Thermal Mgmt.* Dual fan panel* Power supply* Thermal control assembly* Mounting screws* Wire ties and anchors* Installation instructions

    1 Review(s)
    $102.99
  2. Cool Stack I Exhaust

    Cool Stack I Exhaust

    …Manufacturer: Active Thermal Mgmt. The Cool Stack I Exhaust mounts in your equipment rack, either at the very top or above the hottest component. Install the included 90-degree thermal switch so that it can sense the hottest air in the rack. The unit can be controlled by either the thermal switch or…

    $257.49
  3. AR756 Traditional Style RTF Cabinet Door

    AR756 Traditional Style RTF Cabinet Door

    …one of the most time-consuming parts - building doors and drawer fronts. These doors are made of flat MDF panels wrapped in durable rigid thermal foil (RTF) laminate. They are scratch-resistant and not paintable. Place your order in three easy steps:* Select your desired laminate pattern.*…

    From: $15.19
  4. AP758 Traditional Style RTF Cabinet Door

    AP758 Traditional Style RTF Cabinet Door

    …one of the most time-consuming parts - building doors and drawer fronts. These doors are made of flat MDF panels wrapped in durable rigid thermal foil (RTF) laminate. They are scratch-resistant and not paintable. Place your order in three easy steps:* Select your desired laminate pattern.*…

    From: $15.19
  5. AL757 Traditional Style RTF Cabinet Door

    AL757 Traditional Style RTF Cabinet Door

    …one of the most time-consuming parts - building doors and drawer fronts. These doors are made of flat MDF panels wrapped in durable rigid thermal foil (RTF) laminate. They are scratch-resistant and not paintable. Place your order in three easy steps:* Select your desired laminate pattern.*…

    From: $15.19
  6. DBS 751 Contemporary Style RTF Cabinet Door

    DBS 751 Contemporary Style RTF Cabinet Door

    …one of the most time-consuming parts - building doors and drawer fronts. These doors are made of flat MDF panels wrapped in durable rigid thermal foil (RTF) laminate. They are scratch-resistant and not paintable. Place your order in three easy steps:* Select your desired laminate pattern.*…

    From: $15.19
  7. JR7 Traditional Style RTF Cabinet Door

    JR7 Traditional Style RTF Cabinet Door

    …one of the most time-consuming parts - building doors and drawer fronts. These doors are made of flat MDF panels wrapped in durable rigid thermal foil (RTF) laminate. They are scratch-resistant and not paintable. Place your order in three easy steps:* Select your desired laminate pattern.*…

    1 Review(s)
    From: $21.69
  8. JP7 Traditional Style RTF Cabinet Door

    JP7 Traditional Style RTF Cabinet Door

    …one of the most time-consuming parts - building doors and drawer fronts. These doors are made of flat MDF panels wrapped in durable rigid thermal foil (RTF) laminate. They are scratch-resistant and not paintable. Place your order in three easy steps:* Select your desired laminate pattern.*…

    From: $21.69
  9. JL7 Traditional Style RTF Cabinet Door

    JL7 Traditional Style RTF Cabinet Door

    …one of the most time-consuming parts - building doors and drawer fronts. These doors are made of flat MDF panels wrapped in durable rigid thermal foil (RTF) laminate. They are scratch-resistant and not paintable. Place your order in three easy steps:* Select your desired laminate pattern.*…

    From: $22.59
  10. AR756 Traditional Style RTF Drawer Front

    AR756 Traditional Style RTF Drawer Front

    …one of the most time-consuming parts - building doors and drawer fronts. These drawer fronts are made of flat MDF panels wrapped in durable rigid thermal foil (RTF) laminate. They are scratch-resistant and not paintable. Place your order in three easy steps:* Select your desired laminate pattern.*…

    From: $28.49
  11. AP758 Traditional Style RTF Drawer Front

    AP758 Traditional Style RTF Drawer Front

    …one of the most time-consuming parts - building doors and drawer fronts. These drawer fronts are made of flat MDF panels wrapped in durable rigid thermal foil (RTF) laminate. They are scratch-resistant and not paintable. Place your order in three easy steps:* Select your desired laminate pattern.*…

    From: $15.19
  12. JR7 Traditional Style RTF Drawer Front

    JR7 Traditional Style RTF Drawer Front

    …one of the most time-consuming parts - building doors and drawer fronts. These drawer fronts are made of flat MDF panels wrapped in durable rigid thermal foil (RTF) laminate. They are scratch-resistant and not paintable. Place your order in three easy steps:* Select your desired laminate pattern.*…

    From: $36.19
  13. Festool ETS 150/3 Random Orbital Finish Sander (571903)

    Festool ETS 150/3 Random Orbital Finish Sander (571903)

    …and up to 30% longer abrasive life.* MMC electronic controls deliver soft-start, step-less variable speed control, constant speed under load, and thermal and overload protection.* StickFix hook and loop pad for fast and easy abrasive removal with resilient pad hooks and hard-wearing fabric backing,…

    $345.00
  14. Festool ETS 150/5 Random Orbital Finish Sander (571916)

    Festool ETS 150/5 Random Orbital Finish Sander (571916)

    …and up to 30% longer abrasive life.* MMC electronic controls deliver soft-start, step-less variable speed control, constant speed under load, and thermal and overload protection.* StickFix hook and loop pad for fast and easy abrasive removal with resilient pad hooks and hard-wearing fabric backing,…

    $345.00
  15. Festool MFK 700 EQ Set Trim Router with New T-Loc Systainer

    Festool MFK 700 EQ Set Trim Router with New T-Loc Systainer

    …the surface material and eliminate the need for additional filing or sanding. A powerful 720 Watt motor utilizes soft start technology and onboard thermal monitoring to protect against overload, while a super-fine micro adjustment knob allows for fine tuning the cut depth with an accuracy of 1/10 of…

    $525.00
  16. Festool HL 850 E Planer with New T-Loc Systainer

    Festool HL 850 E Planer with New T-Loc Systainer

    …blade changes in under a minute* Single spiral blade requires no complicated adjustments* Soft start motor* Maintains constant RPM under load* Thermal overload protection* Dust hose can be mounted on the left or the right; hinged baffle is knob-actuated Includes:* HL 850 E Planer* Parallel guide*…

    1 Review(s)
    $615.00
  17. Light Brown Phenolic Faced Plywood Sheets

    Light Brown Phenolic Faced Plywood Sheets

    This 14-ply solid 100% Birch plywood features hard and smooth Birch face veneers with phenolic resin thermally fused into both panel sides. The net effect is an ultra-stable, low-friction and waterproof surface with practical uses all over the shop. The virtually voidless core eliminates the need…

    5 Review(s)
    $24.99
  18. ButtKicker 1000-Watt Amplifier

    ButtKicker 1000-Watt Amplifier

    …mode if no sound is detected after 20 minutes * Multi-Country use - operates on 95V to 132V or 195V to 253V. 50 or 60Hz for all voltages * Thermal and output protection circuits - protects the amplifier from damage if an unsafe condition exists * Convection cooling - you won't be distracted…

    $360.49
  19. Festool TS 55 REQ Plunge Cut Saw with 55" Guide Rail (561556)

    Festool TS 55 REQ Plunge Cut Saw with 55" Guide Rail (561556)

    …to the material. The electronics also maintain a consistent speed under load, improving cut performance and protecting the saw's motor from thermal and current overload.* Rotating dust port lets you direct dust away from the saw, user, and the material or connect it to a Festool CT dust extractor…

    1 Review(s)
    $615.00
  20. Festool 90 DX Rotex Sander with New T-Loc Systainer

    Festool 90 DX Rotex Sander with New T-Loc Systainer

    …any project* 1/2 HP motor* Industry leading dust extraction captures 99% of dust* MMC Electronics make using the sander easier and more efficent (Thermal overload protection, constant speed under load, soft start and more) What's in the box?* New T-Loc Systainer* Plug-it cord* 3-1/2" Round pad*…

    2 Review(s)
    $415.00
  21. Room-to-Room Fan

    Room-to-Room Fan

    In every home, there always seems to be at least one room that's always too hot or too cold. Regulating the temperature in that room is now substantially easier with the Room-to-Room Fan, a two-speed, in-wall ventilation system that moves heated or cooled air between rooms. This built-in solution is…

    $61.79
  • Grid List
  • Page:
    1. 1
  • Items 1 - 21 of 21
  • Page:
    1. 1
Feedback X