Thin

  • Items 1 - 24 of 250
  • Page:
    1. 1
    2. 2
    3. 3
  1. Thin Rip Tablesaw Jig

    Thin Rip Tablesaw Jig

    …guide keeps your workpiece firmly against the fence for perfect repeatability. Use the graduated scale to fine-tune for extremely thin strips. * Note: Ripping thin strips requires the use of a zero-clearance insert, sold separately.* The perfect tool for edging, inlay, bent laminations and more.*…

    104 Review(s)
    $26.99
  2. African Mahogany by the Piece-1/8" Thickness

    African Mahogany by the Piece-1/8" Thickness

    …highly attractive figures. Flat-sawn boards feature wavy horizontal bands. All boards are machined S4S to 1/8", 1/4", 1/2" and 3/4" thicknesses. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations. Thicker boards are ideal…

    4 Review(s)
    From: $4.99
  3. Norton 3X Contour Sanding Sponges

    Norton 3X Contour Sanding Sponges

    These thin, flexible sponges conform nicely to contoured parts like chair and table legs. Plus, they feature the durability and fine finish of Norton 3X, made from a superior grade abrasive that cuts better and lasts far longer than conventional aluminum oxide. Stearate coating helps keep it from…

    1 Review(s)
  4. Norton 5X Contour Sanding Sponges

    Norton 5X Contour Sanding Sponges

    These thin, flexible sponges conform nicely to contoured parts like chair and table legs. They feature the durability and fine finish of Norton 5X aluminum oxide abrasive. The sanding sponges are treated to resist clogging, which helps them last much longer than conventional sandpaper. Each sponge…

    1 Review(s)
    $3.49
  5. Wunderfil Wood Filler - 2 oz colors

    Wunderfil Wood Filler - 2 oz colors

    …everything from nail holes to wood grain. Versatile Wunderfil™ works great on both finished and unfinished wood. Use full strength for holes or thin with water for filling open grained woods. A water-based, stainable formula makes cleanup a snap! Original Natural Oak Wunderfil also comes in…

    37 Review(s)
    $5.49
  6. Repair it with Mr. Grip Furniture Repair Kit

    Repair it with Mr. Grip Furniture Repair Kit

    …scissors, place over dowel end and push into place. For screws, cut to fit in hole lengthwise and then insert screw. Furniture repair kit #33118 contains 8 pieces measuring 1/4" x 4" . Screw hold kit #33126 contains 8 pieces 3/4" x 2" . Pieces are thin metal sheets with sharp teeth on both sides.

    1 Review(s)
    $4.49
  7. FastCap Wood Washers, Pack of 50

    FastCap Wood Washers, Pack of 50

    …shop jigs with slot adjustments, or for attaching table tops with slotted cleats to allow for wood movement. They're also ideal for assembly in thin or fragile materials such as OSB, where pull-through would be a concern. Technical Details:* Works with #6 and #8 bugle, flat or countersunk screws.*…

    From: $2.19
  8. Olson® 5-inch Pin End Thin Kerf Scroll Saw Blades, 6-Pack

    Olson® 5-inch Pin End Thin Kerf Scroll Saw Blades, 6-Pack

    Thin kerf scroll saw blades for extra-fine cuts in hard or soft wood, as well asplastic. Capable of cutting materials from 3/32-inch to 1/2-inch thick, and of cuttingradiuses as small as 1/8-inch. Fine spring steel. Sold in packs of six. Technical Details:* Excellent for hardwoods, softwoods,…

    $5.79
  9. Scroll Saw Blades-Scroll Blades

    Scroll Saw Blades-Scroll Blades

    …greater chip clearance. For work with wood, plastic and fibrous materials. 52712 is for extremely intricate sawing, 99516 is for right radius work in thin 3/32" to 1/8" materials, and 52746 is for close radius cutting in material 1/8" or thicker. Technical Details* Size #2/0 (52712) blades are .022"…

    1 Review(s)
    From: $5.59
  10. Spirit Pen Kit

    Spirit Pen Kit

    …drill bit (36494 or 21500), a 1/2" drill bit (20812) and a wood blank (all sold separately). * Finished size: 13/16" x 5-1/4"* Necessary blank size: 1" x 6"* Instructions included Plating information: 24-carat gold plated pens are protected by a thin layer of epoxy for increased wear resistance.

    1 Review(s)
    $12.99 $5.99

    SAVE 54%

  11. Red Oak by the Piece-1/8" Thickness

    Red Oak by the Piece-1/8" Thickness

    …from a pinkish tone to light reddish-brown. These thin boards are machined S4S to 1/8" and 1/4" thicknesses, eliminating wear and tear on your planer. You won't have to worry about chipout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay,…

    4 Review(s)
    From: $6.29
  12. Deft Semi-Gloss Wood Finish Spray

    Deft Semi-Gloss Wood Finish Spray

    …Easy to touch up. Directions for use:* Not recommended for exterior use or for floors.* Test finish on hidden area before application.* Apply 4-5 thin coats.* Recoat in 30 minutes.* Coverage: 60 sq. ft. per can.* If necessary, use lacquer thinner for cleanup. Please note that this item can only be…

    3 Review(s)
    $11.99
  13. Micro Jig Splitter™ SteelPRO System, Thin Kerf

    Micro Jig Splitter™ SteelPRO System, Thin Kerf

    …thousands on an inch. This will virtually eliminate any chance of kickback on the table saw and greatly reduce the chance of severing fingers. For Thin Kerf, range of 0.090"-0.118"The splitters are simple to install and simple to use. We include an easy to follow drill-guide template to install the…

    3 Review(s)
    $39.99
  14. Magswitch® Ultimate Thin Stock Jig/Rip Guide Attachment

    Magswitch® Ultimate Thin Stock Jig/Rip Guide Attachment

    …and 3/8". The opposite side is sloped for odd sizes up to 3/4". The Ultimate Thin Stock Jig/Rip Guide features a fixed roller bearing and extends forward for accurate repetitive ripping of your thin stock. Ideal for thin stock hold down or in/out feed on a table saw. Enhances safety by keeping your…

    $21.99
  15. Micro Jig GRR-Ripper® 1/8'' Side Leg GRP-11G

    Micro Jig GRR-Ripper® 1/8'' Side Leg GRP-11G

    …Precision, safety, and confidence with the GRR-Ripper. 1/8" side leg attachment easily installs to the Micro Jig GRR-Ripper® Basic 3D Push Block System (GR-100) (sold separately) with included hardware, creating a 3/8" tunnel to enable table saw rips as thin as 1/8". Tunnel height is 1/2".

    1 Review(s)
    $15.49
  16. Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200

    Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200

    Enjoy the ultimate workshop companion. This advanced model of the GRR-Ripper utilizes all the same innovative features of the GR-100 but comes with two additional accessories that improve the control and expandability of the GRR-Ripper System. The Micro Jig GRR-Ripper Advanced 3D Pushblock (GR-200)…

    7 Review(s)
    $79.99
  17. Thin Kerf Parting Tool, 1/16''

    Thin Kerf Parting Tool, 1/16''

    Designed to give the cleanest cuts with a minimum of waste, this Thin Kerf Parting Tool features a 1-1/4" blade width that eliminates the flexing and twisting associated with thin blades. The double-bevel HSS cutting face imparts fine parting lines to turnings. For a solid interface with the handle,…

    2 Review(s)
    $35.99
  18. Click-N-Carve CNC Carving Machine BE2015

    Click-N-Carve CNC Carving Machine BE2015

    …woodworker!Looking to carve on larger work pieces? Check out this models older brother, the BE3030. A lithophane is an etched or carved piece of artwork on thin acrylic that can only be seen clearly when back lit with a light source. A lithophane presents a three dimensional image that is much more…

    3 Review(s)
    $1599.99
  19. Tap-In Glides for wood chairs.-Choose color and size

    Tap-In Glides for wood chairs.-Choose color and size

    Protect floors from marring easily and permanently with tap in glides. A unique Swedish design, these felt tipped glides are held in place by a thin-walled metal rivet. Simply tap into the bottom of wood furniture legs with a hammer. Technical Details* Available in white and brown* 7/8" and 1"…

    8 Review(s)
    From: $6.99
  20. General Finishes Exterior 450 Varnish

    General Finishes Exterior 450 Varnish

    …to sand in 1 hour under ideal conditions (70°F, 70% humidity). Cooler temperatures and higher humidity will prolong drying time.* Thinning: If necessary, thin with 10-20% water.* Application: Use a foam brush, paint pad applicator or spray gun.* Can be sprayed through compressed air, HVLP,…

    1 Review(s)
    From: $22.99
  21. Handtool Kit for Tormek Sharpening Systems HTK-705

    Handtool Kit for Tormek Sharpening Systems HTK-705

    …be stiff, and the minimum blade length is 60 mm.* The Long Knife Jig is suitable for long and flexible knives. The jig's 140 mm width stabilizes a thin blade. Requires minimum blade length of 160 mm.* The Scissors Jig is for scissors of all sizes as well as shears. It is also suitable for portable…

    1 Review(s)
    $178.00
  22. Bendix 1494 Embossed Design Moulding

    Bendix 1494 Embossed Design Moulding

    This thin decorative band works great with other moldings. Each piece is precisely shaped, sanded and ready for finishing. Click on "View Larger Image" to see the molding profile. Moulding measures 3/16"D x 3/4"H, is made of European Beech, and sold in 8 foot lengths. Extra shipping charges may…

    $11.99
  23. Freud® LU79R Thin Kerf Ultimate Plywood & Melamine Saw Blades

    Freud® LU79R Thin Kerf Ultimate Plywood & Melamine Saw Blades

    Using advanced technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine,…

    5 Review(s)
    From: $52.47
  24. Freud 10x30 Thin Kerf Glue Line Rip Blade, LM75R010

    Freud 10x30 Thin Kerf Glue Line Rip Blade, LM75R010

    With a unique triple chip tooth design, this 10" blade leaves extremely smooth, true surfaces for glue and finish work. Ideal for ripping hard and soft woods 1/8" to 1" thick. Technical Details:* A super-thin .091" kerf requires less power and allows for a faster feed rate, while laser-cut…

    4 Review(s)
    $59.97
  • Items 1 - 24 of 250
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X