Thin Kerf Rip

  • Grid List
  • Page:
    1. 1
  • Items 1 - 15 of 15
  • Page:
    1. 1
  1. Freud® LU87R Industrial Thin Kerf Rip Saw Blades

    Freud® LU87R Industrial Thin Kerf Rip Saw Blades

    This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD® coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4" to…

    9 Review(s)
    From: $32.97
  2. Freud® LU83R Industrial Thin Kerf Heavy Duty Combination Saw Blades

    Freud® LU83R Industrial Thin Kerf Heavy Duty Combination Saw Blades

    The ultimate combination blade is now available in a thin kerf design with Freud's LU83R. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut…

    24 Review(s)
    From: $49.97
  3. Freud® 10" x 30T Industrial Thin Kerf Glue Line Rip Saw Blade - LM75R010

    Freud® 10" x 30T Industrial Thin Kerf Glue Line Rip Saw Blade - LM75R010

    …tooth design, this 10" blade leaves extremely smooth, true surfaces for glue and finish work. Ideal for ripping hard and soft woods 1/8" to 1" thick. Technical Details:* A super-thin .091" kerf requires less power and allows for a faster feed rate, while laser-cut anti-vibration slots drastically…

    4 Review(s)
    $59.97
  4. Micro Jig Splitter™ SteelPRO System, Thin Kerf

    Micro Jig Splitter™ SteelPRO System, Thin Kerf

    …Plug N' Play ease. Remount and remove the Splitters in two seconds. Make no compromises in safety. Make table saw rips safer and prevent kickback! Technical Details:* For a Thin Kerf range of 0.090"-0.118"* Use for 90° cuts only* Made of 100% polycarbonate shell and reinforced with a solid…

    3 Review(s)
    $39.99
  5. Freud® LU86R Industrial Thin Kerf General Purpose Saw Blades

    Freud® LU86R Industrial Thin Kerf General Purpose Saw Blades

    This heavy-duty thin kerf blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may be cut, but some loss of surface finish may…

    From: $40.97
  6. 10'' x 40T Forrest Woodworker II Thin Kerf General Purpose Blade

    10'' x 40T Forrest Woodworker II Thin Kerf General Purpose Blade

    This thin kerf table saw blade produces smooth as sanded rips and crosscuts in hardwoods up to 2" thick. For another option in the Forrest Woodworker II series, check out the ATB General Purpose Blade. The Woodworker II is a top-quality general purpose blade. This thin kerf version of the WWII is…

    20 Review(s)
    $119.99
  7. Freud 10'' Thin Kerf Sawblades - 24T General Purpose and 80T Crosscut (Pack of 2)

    Freud 10'' Thin Kerf Sawblades - 24T General Purpose and 80T Crosscut (Pack of 2)

    This twin pack of Freud blades includes a 24T General Purpose Blade for ripping and dimensioning, and an 80T Ultra-Fine Crosscut Blade for the fine finishing cuts on intricate molding and joinery. Both blades feature thin-kerf technology, which is less taxing on your saw, and generates less waste.…

    $119.99 $79.99

    SAVE 33%

  8. Freud® 10" x 40T Premier Fusion Thin Kerf General Purpose Saw Blade - P410T

    Freud® 10" x 40T Premier Fusion Thin Kerf General Purpose Saw Blade - P410T

    …- all working together in concert to provide the ultimate cut. One blade does it all. Whether you're ripping or crosscutting, a Premier Fusion blade will tackle any project. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally…

    8 Review(s)
    $79.97
  9. Irwin 10" x 24T Marples ATB Rip Saw Blade

    Irwin 10" x 24T Marples ATB Rip Saw Blade

    24 rugged, razor-sharp carbide teeth with an aggressive hook angle and an ATB grind for fast, clean rip cuts. The Irwin Marples 10" 24T Saw Blade also features a thin kerf design, which reduces dust and material waste, and allows for use on all table saws, from lower-powered portable machines to…

    $34.99
  10. Festool TS 55 Universal Circular Saw Blade (495376)

    Festool TS 55 Universal Circular Saw Blade (495376)

    Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Universal General Purpose blade for the TS 55 Plunge Cut Saw is a clean-cutting general purpose blade for wood and soft plastics, and serves as a fine-rip cutting blade…

    $52.00
  11. Irwin 10" x 50T Marples ATB+R Combination Saw Blade

    Irwin 10" x 50T Marples ATB+R Combination Saw Blade

    …teeth with extra-deep gullets every five teeth. This allows efficient chip ejection during rip cuts, while maintaining excellent finish quality on crosscuts. The blade also features a thin kerf design, which reduces dust and material waste, and allows for use on all table saws, from lower-powered…

    7 Review(s)
    $44.99
  12. 10'' x 40T ATB Forrest Woodworker II General Purpose Blade

    10'' x 40T ATB Forrest Woodworker II General Purpose Blade

    …surface! Rips and crosscuts hardwoods up to 2" thick. Ply-veneers of oak and birch will crosscut with no bottom splinter at moderate feed rates. Ends second-step finishing (jointing and sanding not required). For another option in the Forrest Woodworker II series, check out the Thin Kerf General…

    23 Review(s)
    $119.99
  13. Olson® All Pro™ Band Saw Blade Assortment, 93-1/2''

    Olson® All Pro™ Band Saw Blade Assortment, 93-1/2''

    …offers maximum stability and beam strength for extremely straight cuts and resawing without "barreling".* Thin kerf makes the work easier for your saw and produces less waste.* 3 TPI can rip through the thickest lumber!* Minimum material thickness of 1".* Maximum material thickness of 6".* Hook…

    4 Review(s)
    $52.49
  14. Freud® 10" x 40T Premier Fusion General Purpose Saw Blade - P410

    Freud® 10" x 40T Premier Fusion General Purpose Saw Blade - P410

    …warp. The coating lubricates the blade, allowing it to spin freely, and eliminates pitch and debris build-up on the blade. Also available as a thin kerf blade. Technical Details* Laser-cut anti-vibration slots drastically reduce vibration and sideways movement in the cut - extending blade life, and…

    8 Review(s)
    $99.97
  15. Laguna ShearForce Bandsaw Blade, 5/8'' x 115''

    Laguna ShearForce Bandsaw Blade, 5/8'' x 115''

    …exceptional blade that offers an economic alternative to the Resaw King. It combines a smooth finish for general ripping and resawing with a long blade life, and its ultra-thin kerf ensures maximum yield for your lumber. Made from durable spring steel with precision heat-treated teeth, the…

    $40.25
  • Grid List
  • Page:
    1. 1
  • Items 1 - 15 of 15
  • Page:
    1. 1
Feedback X