Thin Kerf Rip Blade

  • Grid List
  • Page:
    1. 1
  • Items 1 - 15 of 15
  • Page:
    1. 1
  1. Freud 10x30 Thin Kerf Glue Line Rip Blade, LM75R010

    Freud 10x30 Thin Kerf Glue Line Rip Blade, LM75R010

    With a unique triple chip tooth design, this 10" blade leaves extremely smooth, true surfaces for glue and finish work. Ideal for ripping hard and soft woods 1/8" to 1" thick. Technical Details:* A super-thin .091" kerf requires less power and allows for a faster feed rate, while laser-cut…

    4 Review(s)
    $59.97
  2. 10'' x 40T ATB Forrest Woodworker II General Purpose Blade

    10'' x 40T ATB Forrest Woodworker II General Purpose Blade

    …Woodworker II series, check out the Thin Kerf General Purpose Blade. The Woodworker II is a top-quality general purpose blade. Double hard and 40% stronger C-4 carbide will give up to 300% longer life between sharpenings. Specifications:* 40 teeth. * 1/8" kerf. * Teeth have 15° alternating tooth…

    23 Review(s)
    $120.79
  3. 10'' x 40T Forrest Woodworker II Thin Kerf General Purpose Blade

    10'' x 40T Forrest Woodworker II Thin Kerf General Purpose Blade

    This thin kerf table saw blade produces smooth as sanded rips and crosscuts in hardwoods up to 2" thick. For another option in the Forrest Woodworker II series, check out the ATB General Purpose Blade. The Woodworker II is a top-quality general purpose blade. This thin kerf version of the WWII is…

    19 Review(s)
    $114.99
  4. Panther Saw Blade for Festool TS 75 EQ

    Panther Saw Blade for Festool TS 75 EQ

    …Panther Ripping blade for the TS 75 Plunge Cut Saw is an excellent fast-cutting rip blade with an aggressive hook angle and deep gullets for use with both hard and soft woods. This blade incorporates an offset tooth design known as ATB (Alternating Top Bevel), allowing the blade to cut alternately…

    $73.00
  5. Freud® LU87R Industrial Thin Kerf Rip Saw Blades

    Freud® LU87R Industrial Thin Kerf Rip Saw Blades

    This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD® coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4" to…

    9 Review(s)
    From: $32.97
  6. 10'' Freud Premier Fusion Thin Kerf Saw Blade

    10'' Freud Premier Fusion Thin Kerf Saw Blade

    …cut. One blade does it all. Whether you're ripping or crosscutting, a Premier Fusion blade will tackle any project. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results. The Perma-SHIELD® coating covers the blade plate…

    7 Review(s)
    $79.97
  7. Freud® LU86R Industrial Thin Kerf General Purpose Saw Blades

    Freud® LU86R Industrial Thin Kerf General Purpose Saw Blades

    This heavy-duty thin kerf blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may be cut, but some loss of surface finish may…

    From: $40.97
  8. Freud® LU83R Industrial Thin Kerf Heavy Duty Combination Saw Blades

    Freud® LU83R Industrial Thin Kerf Heavy Duty Combination Saw Blades

    The ultimate combination blade is now available in a thin kerf design with Freud's LU83R. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut…

    24 Review(s)
    From: $49.97
  9. Freud® Premier Fusion Saw Blade

    Freud® Premier Fusion Saw Blade

    …heat build-up. Perma-SHIELD® blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing it to spin freely, and eliminates pitch and debris build-up on the blade. Also available as a thin kerf blade. Technical Details* Laser-cut…

    8 Review(s)
    $99.97
  10. Olson® All Pro™ Band Saw Blade Assortment, 93-1/2''

    Olson® All Pro™ Band Saw Blade Assortment, 93-1/2''

    …5/8" Wide Band Saw Blade, 93-1/2"* 5/8" width can cut a 4" radius circle.* Wide blade offers maximum stability and beam strength for extremely straight cuts and resawing without "barreling".* Thin kerf makes the work easier for your saw and produces less waste.* 3 TPI can rip through the thickest…

    4 Review(s)
    $52.49
  11. Saw Blade Panther, ATF 55 (495372)

    Saw Blade Panther, ATF 55 (495372)

    …Panther Ripping blade for the TS 55 Plunge Cut Saw is an excellent fast-cutting rip blade with an aggressive hook angle and deep gullets for use with both hard and soft woods. This blade incorporates an offset tooth design known as ATB (Alternating Top Bevel), allowing the blade to cut alternately…

    $45.00
  12. Festool TS 55 Universal Circular Saw Blade (495376)

    Festool TS 55 Universal Circular Saw Blade (495376)

    …Purpose blade for the TS 55 Plunge Cut Saw is a clean-cutting general purpose blade for wood and soft plastics, and serves as a fine-rip cutting blade for glue-ready joints.This blade incorporates an offset tooth design known as ATB (Alternating Top Bevel), allowing the blade to cut alternately…

    $52.00
  13. Irwin Marples 10'' Saw Blade, 50T ATB+R

    Irwin Marples 10'' Saw Blade, 50T ATB+R

    This 50-tooth combination blade features mid-size hook teeth with extra-deep gullets every five teeth. This allows efficient chip ejection during rip cuts, while maintaining excellent finish quality on crosscuts. The blade also features a thin kerf design, which reduces dust and material waste, and…

    7 Review(s)
    $44.99
  14. Irwin Marples 10'' Saw Blade, 24T ATB

    Irwin Marples 10'' Saw Blade, 24T ATB

    …clean rip cuts. The Irwin Marples 10" 24T Saw Blade also features a thin kerf design, which reduces dust and material waste, and allows for use on all table saws, from lower-powered portable machines to high-end cabinet saws. IRWIN is proud to introduce a full line of fine woodworking saw blades

    $34.99
  15. Laguna ShearForce Bandsaw Blade, 5/8'' x 115''

    Laguna ShearForce Bandsaw Blade, 5/8'' x 115''

    The Laguna ShearForce is an exceptional blade that offers an economic alternative to the Resaw King. It combines a smooth finish for general ripping and resawing with a long blade life, and its ultra-thin kerf ensures maximum yield for your lumber. Made from durable spring steel with precision…

    $40.25
  • Grid List
  • Page:
    1. 1
  • Items 1 - 15 of 15
  • Page:
    1. 1
Feedback X