Thin Kerf Table Saw Blades

  • Grid List
  • Page:
    1. 1
  • Items 1 - 21 of 21
  • Page:
    1. 1
  1. Freud® LU87R Industrial Thin Kerf Rip Saw Blades

    Freud® LU87R Industrial Thin Kerf Rip Saw Blades

    This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD® coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4" to…

    9 Review(s)
    From: $32.97
  2. Freud® LU88R Industrial Thin Kerf Fine Finish Crosscut Saw Blades

    Freud® LU88R Industrial Thin Kerf Fine Finish Crosscut Saw Blades

    …coated blade gives new life to underpowered saws and produces smooth crosscuts in hardwoods, softwoods and moldings. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. Thin kerf blades remove less material than standard carbide blades, thus requiring…

    1 Review(s)
    From: $49.47
  3. Freud® LU83R Industrial Thin Kerf Heavy Duty Combination Saw Blades

    Freud® LU83R Industrial Thin Kerf Heavy Duty Combination Saw Blades

    The ultimate combination blade is now available in a thin kerf design with Freud's LU83R. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut…

    24 Review(s)
    From: $49.97
  4. Freud® LU77M Industrial Thin Kerf Non-Ferrous Metal Saw Blades

    Freud® LU77M Industrial Thin Kerf Non-Ferrous Metal Saw Blades

    This thin kerf, heavy-duty, non-ferrous metal cutting blade produces an excellent finish. These blades have custom designed gullets to minimize chip build-up and specially formulated carbide for long life. Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray…

    From: $62.47
  5. 10'' x 40T Forrest Woodworker II Thin Kerf General Purpose Blade

    10'' x 40T Forrest Woodworker II Thin Kerf General Purpose Blade

    This thin kerf table saw blade produces smooth as sanded rips and crosscuts in hardwoods up to 2" thick. For another option in the Forrest Woodworker II series, check out the ATB General Purpose Blade. The Woodworker II is a top-quality general purpose blade. This thin kerf version of the WWII is…

    19 Review(s)
    $114.99
  6. Irwin Marples 10'' Saw Blade, 50T ATB+R

    Irwin Marples 10'' Saw Blade, 50T ATB+R

    …On: Table Saw, Miter Saw. About IRWIN Blades: IRWIN is proud to introduce a full line of fine woodworking saw blades that are manufactured in Italy to the highest standards of precision required for fine woodworking and finish carpentry. These industry leading laser-cut, thin kerf saw blades are…

    7 Review(s)
    $44.99
  7. Freud® LU74R Industrial Thin Kerf Ultimate Cut-Off Saw Blades

    Freud® LU74R Industrial Thin Kerf Ultimate Cut-Off Saw Blades

    This thin kerf blade produces glass smooth surfaces when crosscutting hardwoods and softwoods, thanks to Freud's unique side grinding technology. The larger blades are ideal for miter box applications. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower…

    3 Review(s)
    From: $57.47
  8. Freud® LU79R Thin Kerf Ultimate Plywood & Melamine Saw Blades

    Freud® LU79R Thin Kerf Ultimate Plywood & Melamine Saw Blades

    Using advanced technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine,…

    5 Review(s)
    From: $52.47
  9. Freud® LU86R Industrial Thin Kerf General Purpose Saw Blades

    Freud® LU86R Industrial Thin Kerf General Purpose Saw Blades

    This heavy-duty thin kerf blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may be cut, but some loss of surface finish may…

    From: $40.97
  10. Freud® LU91M Industrial Thin Kerf Sliding Compound Miter Saw Blades

    Freud® LU91M Industrial Thin Kerf Sliding Compound Miter Saw Blades

    This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5° negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove less material than standard carbide blades,

    From: $55.47
  11. Irwin Marples 10'' Saw Blade, 80T HI-ATB

    Irwin Marples 10'' Saw Blade, 80T HI-ATB

    …Cross-Cutting Saw Blade more than makes the cut. 80 teeth boasting a HI-ATB tooth geometry ensure crisp kerfs and minimal saw marks, even in the most delicate materials. The blade also features a thin kerf design, which reduces dust and material waste, and allows for use on all table saws, from…

    $59.99
  12. Freud® LU96R Industrial Thin Kerf Double Sided Laminate Melamine Saw Blades

    Freud® LU96R Industrial Thin Kerf Double Sided Laminate Melamine Saw Blades

    The LU96R is a thin kerf blade that is designed to give long life and exellent finish on the top and bottom of laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent…

    1 Review(s)
    From: $65.97
  13. 10'' x 40T ATB Forrest Woodworker II General Purpose Blade

    10'' x 40T ATB Forrest Woodworker II General Purpose Blade

    …Woodworker II series, check out the Thin Kerf General Purpose Blade. The Woodworker II is a top-quality general purpose blade. Double hard and 40% stronger C-4 carbide will give up to 300% longer life between sharpenings. Specifications:* 40 teeth. * 1/8" kerf. * Teeth have 15° alternating tooth…

    23 Review(s)
    $120.79
  14. Freud® LU97M Industrial Double Sided Laminate/Melamine Saw Blade

    Freud® LU97M Industrial Double Sided Laminate/Melamine Saw Blade

    blades needed with this blade! The Silver I.C.E.™ (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw

    2 Review(s)
    $94.97
  15. Micro Jig MJ Splitter™ for Table Saw

    Micro Jig MJ Splitter™ for Table Saw

    …mini featherboard for the keeper piece behind the saw blade.* Designed to be used on a Zero Clearance Insert with or without the Micro Jig GRR-Ripper System.* 37477 for use with 1/8" kerf saw blades only. 21505 for use with Thin Kerf Blades.* Use for making 90 degree cuts only and will not…

    14 Review(s)
    From: $30.99
  16. Freud® LU97R Industrial Double Sided Laminate Melamine Saw Blades

    Freud® LU97R Industrial Double Sided Laminate Melamine Saw Blades

    …No scoring blades needed with this blade! The Perma-SHIELD® coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD® blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing…

    2 Review(s)
    From: $90.47
  17. Forrest Woodworker I General Purpose Blade

    Forrest Woodworker I General Purpose Blade

    thin kerf general purpose blade that's perfect for table saws under 3HP. The WWI gives you scratch free and polished cuts on stock up to 2" thick. Thin kerf saves wood loss on each cut and reduces power drain on your saw. Perfect for general purpose cutting on non-sliding miter saws and table saws

    $131.99
  18. Irwin Marples 10'' Saw Blade, 60T ATB+R

    Irwin Marples 10'' Saw Blade, 60T ATB+R

    Saw Blade. Whether mounted on a miter saw or in a table saw, the razor-sharp carbide teeth and ATB+R grind will produce excellent cuts in hard and soft woods. The unique raker tooth design allows for perfectly flat-bottomed cuts in grooving applications. The blade also features a thin kerf design,…

    $54.99
  19. Irwin Marples 10'' Saw Blade, 40T ATB

    Irwin Marples 10'' Saw Blade, 40T ATB

    …Marples 10" 40T Saw Blade a great candidate for all-around use with table saws and miter saws. The blade also features a thin kerf design, which reduces dust and material waste, and allows for use on all types of saws, from lower-powered portable machines to high-end cabinet saws. IRWIN is proud to…

    $39.99
  20. Irwin Marples 10'' Saw Blade, 84T TCG

    Irwin Marples 10'' Saw Blade, 84T TCG

    …a thing of the past. The blade also features a thin kerf design, which reduces dust and material waste, and allows for use on all table saws, from lower-powered portable machines to high-end cabinet saws. IRWIN is proud to introduce a full line of fine woodworking saw blades that are manufactured in…

    $69.99
  21. Irwin Marples 10'' Saw Blade, 24T ATB

    Irwin Marples 10'' Saw Blade, 24T ATB

    …Irwin Marples 10" 24T Saw Blade also features a thin kerf design, which reduces dust and material waste, and allows for use on all table saws, from lower-powered portable machines to high-end cabinet saws. IRWIN is proud to introduce a full line of fine woodworking saw blades that are manufactured…

    $34.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 21 of 21
  • Page:
    1. 1
Feedback X