Thin Stock

  • Items 1 - 24 of 60
  • Page:
    1. 1
    2. 2
    3. 3
  1. Maple by the Piece-1/2" Thickness

    Maple by the Piece-1/2" Thickness

    thin boards are machined S4S to 1/8" and 1/4" thicknesses, eliminating wear and tear on your planer. You won't have to worry about chipout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock,

    7 Review(s)
    From: $4.99
  2. Maple by the Piece-1/4" Thickness

    Maple by the Piece-1/4" Thickness

    thin boards are machined S4S to 1/8" and 1/4" thicknesses, eliminating wear and tear on your planer. You won't have to worry about chipout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock,

    5 Review(s)
    From: $4.99
  3. Walnut by the Piece-1/2" Thickness

    Walnut by the Piece-1/2" Thickness

    …sometimes stunning figure. All boards are machined S4S to 1/8", 1/4", 1/2" and 3/4" thicknesses. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations. Thicker boards are ideal for furniture, paneling, cabinet doors, moldings,…

    12 Review(s)
    From: $7.99
  4. Bubinga by the Piece-1/8" Thickness

    Bubinga by the Piece-1/8" Thickness

    thin boards are machined S4S to 1/8" and 1/4" thicknesses, eliminating wear and tear on your planer. You won't have to worry about chipout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock,

    5 Review(s)
    $13.99
  5. Red Oak by the Piece-1/8" Thickness

    Red Oak by the Piece-1/8" Thickness

    thin boards are machined S4S to 1/8" and 1/4" thicknesses, eliminating wear and tear on your planer. You won't have to worry about chipout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock,

    4 Review(s)
    From: $6.29
  6. Maple by the Piece-1/8" Thickness

    Maple by the Piece-1/8" Thickness

    thin boards are machined S4S to 1/8" and 1/4" thicknesses, eliminating wear and tear on your planer. You won't have to worry about chipout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock,

    6 Review(s)
    From: $4.99
  7. Magswitch® Ultimate Thin Stock Jig/Rip Guide Attachment

    Magswitch® Ultimate Thin Stock Jig/Rip Guide Attachment

    …3/8". The opposite side is sloped for odd sizes up to 3/4". The Ultimate Thin Stock Jig/Rip Guide features a fixed roller bearing and extends forward for accurate repetitive ripping of your thin stock. Ideal for thin stock hold down or in/out feed on a table saw. Enhances safety by keeping your…

    $21.99
  8. Zebrawood by the Piece-1/8" Thickness

    Zebrawood by the Piece-1/8" Thickness

    thin boards are machined S4S to 1/8" and 1/4" thicknesses, eliminating wear and tear on your planer. You won't have to worry about tearout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock,

    6 Review(s)
    From: $6.99
  9. Wenge by the Piece-1/8" Thickness

    Wenge by the Piece-1/8" Thickness

    …durable. You won't have to worry about chipout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock, bent laminations and whatever else your imagination can dream up! * Native to: Forests of…

    8 Review(s)
    From: $6.99
  10. Purpleheart by the Piece-1/4" Thickness

    Purpleheart by the Piece-1/4" Thickness

    …extremely resistant to decay. All boards are machined S4S to 1/8", 1/4", 1/2" and 3/4" thicknesses. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors,…

    16 Review(s)
    From: $4.99
  11. Freud® LU90M Industrial Thin Stock Non-Ferrous Metal Saw Blades

    Freud® LU90M Industrial Thin Stock Non-Ferrous Metal Saw Blades

    This blade produces a smooth, burr-free finish when cutting thin aluminum, brass and other non-ferrous metal extrusions. A high tooth count with a 5° hook angle allows the teeth to slice efficiently through the material without binding. The requirements on the cutting edge greatly differ wth…

    From: $104.47
  12. East Indian Rosewood by the Piece

    East Indian Rosewood by the Piece

    …S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boardsare well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors,…

    From: $19.99
  13. Spanish Cedar by the Piece

    Spanish Cedar by the Piece

    …to cigars. These thin boards are ideal for cigar boxes as well as any other decorative boxes. They are machined S4S to 1/4" thickness, eliminating wear and tear on your planer. You won't have to worry about chipout, which is difficult to prevent when planing thin stock. Thin boards are also ideal…

    7 Review(s)
    $23.99
  14. Thin Stock Threaded Inserts, 4-Pack

    Thin Stock Threaded Inserts, 4-Pack

    …material as thin as 1/2".Just use a 3/32" slot cutter or a thin kerf saw blade to create a groove in theedge of your material, drill a hole where the insert will be, and you're ready forassembly. Accepts any bolt with a 10-32 threading. Technical Details:* Since the Thin Stock Threaded…

    $4.99
  15. Freud® LU86R Industrial Thin Kerf General Purpose Saw Blades

    Freud® LU86R Industrial Thin Kerf General Purpose Saw Blades

    This heavy-duty thin kerf blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may be cut, but some loss of surface finish may…

    From: $40.97
  16. Kreg Micro Pocket Drill Guide

    Kreg Micro Pocket Drill Guide

    …Master System.* Reduced width lets you drill two holes across extremely narrow stock, down to 1" wide, creating a much stronger joint in narrow pieces.* Screw heads seat well below material surface in thin stock, perfect for creating fully pluggable pocket holes in 1/2" thick material like drawer…

    8 Review(s)
    $44.95
  17. Olson All Pro Band Saw Blades - Custom Sizes

    Olson All Pro Band Saw Blades - Custom Sizes

    …Band Saw Blades welded to any length you want. Choose from 1/8" width all the way up to 1" width! Cut thin stock and intricate scrollwork with the narrow width blades. Resaw your lumber into thin boards or veneers with the wide blades. These blades contain pin-point carbides, molybdenum, nickel,…

    $0.39
  18. Grr-Ripper® Micro Jig Replacement 1/4'' Leg

    Grr-Ripper® Micro Jig Replacement 1/4'' Leg

    …with both the GR-100 and GR-200 Grr-Ripper models (sold separately, 62689 and 30737). Technical Details:* 1/4" leg is ideal for ripping thin stock.* Installation hardware not included. Please use hardware from your previous Grr-Ripper leg.* Keep the green Grr-Ripper pads clean with denatured…

    $14.99
  19. Olson® All Pro™ Band Saw Blade Assortment, 93-1/2''

    Olson® All Pro™ Band Saw Blade Assortment, 93-1/2''

    …bandsaw will be ready for anything with this assorted blade pack and you'll save money too! Resaw your lumber into thin boards or veneers with the sturdy 5/8" blade. Cut thin stock and intricate scrollwork with the 3/16" blade. The 1/4" blade is a great workhorse blade for general purpose work.*…

    4 Review(s)
    $52.49
  20. GRR-Ripper® Micro Jig Replacement 1/2'' Leg

    GRR-Ripper® Micro Jig Replacement 1/2'' Leg

    …GR-100 and GR-200 Grr-Ripper models (sold separately, 62689 and 30737). Technical Details:* 1/2" leg is ideal for ripping thin stock.* Center Leg is adjustable laterally to hold stock flat against the table.* Installation hardware not included. Please use hardware from your previous Grr-Ripper leg.*…

    $14.99
  21. Maple by the Piece-3/4" Thickness

    Maple by the Piece-3/4" Thickness

    thin boards are machined S4S to 1/8" and 1/4" thicknesses, eliminating wear and tear on your planer. You won't have to worry about chipout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock,

    5 Review(s)
    From: $4.99
  22. Bubinga by the Piece-1/4" Thickness

    Bubinga by the Piece-1/4" Thickness

    thin boards are machined S4S to 1/8" and 1/4" thicknesses, eliminating wear and tear on your planer. You won't have to worry about chipout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock,

    5 Review(s)
    From: $4.99
  23. Bubinga by the Piece-1/2" Thickness

    Bubinga by the Piece-1/2" Thickness

    thin boards are machined S4S to 1/8" and 1/4" thicknesses, eliminating wear and tear on your planer. You won't have to worry about chipout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock,

    5 Review(s)
    From: $10.99
  24. Bubinga by the Piece-3/4" Thickness

    Bubinga by the Piece-3/4" Thickness

    thin boards are machined S4S to 1/8" and 1/4" thicknesses, eliminating wear and tear on your planer. You won't have to worry about chipout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock,

    5 Review(s)
    From: $11.99
  • Items 1 - 24 of 60
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X