Thin Table Saw Blade

  • Items 1 - 24 of 33
  • Page:
    1. 1
    2. 2
  1. Freud® LU87R Industrial Thin Kerf Rip Saw Blades

    Freud® LU87R Industrial Thin Kerf Rip Saw Blades

    This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD® coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4" to…

    9 Review(s)
    From: $32.97
  2. Freud® LU91M Industrial Thin Kerf Sliding Compound Miter Saw Blades

    Freud® LU91M Industrial Thin Kerf Sliding Compound Miter Saw Blades

    This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5° negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove less material than standard carbide blades,

    From: $55.47
  3. Freud® LU96R Industrial Thin Kerf Double Sided Laminate Melamine Saw Blades

    Freud® LU96R Industrial Thin Kerf Double Sided Laminate Melamine Saw Blades

    The LU96R is a thin kerf blade that is designed to give long life and exellent finish on the top and bottom of laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent…

    1 Review(s)
    From: $65.97
  4. Rockler Thin Rip Tablesaw Jig

    Rockler Thin Rip Tablesaw Jig

    This jig allows you to rip thin strips on the left side of the blade, eliminating the danger of pushing narrow strips between the saw and fence. Since the strip is not trapped between the blade and fence, there is also less risk of binding and kickback. It's simple to use; a single knob locks the…

    104 Review(s)
    $26.99
  5. Freud® LU74R Industrial Thin Kerf Ultimate Cut-Off Saw Blades

    Freud® LU74R Industrial Thin Kerf Ultimate Cut-Off Saw Blades

    This thin kerf blade produces glass smooth surfaces when crosscutting hardwoods and softwoods, thanks to Freud's unique side grinding technology. The larger blades are ideal for miter box applications. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower…

    3 Review(s)
    From: $57.47
  6. Freud® 10" x 30T Industrial Thin Kerf Glue Line Rip Saw Blade - LM75R010

    Freud® 10" x 30T Industrial Thin Kerf Glue Line Rip Saw Blade - LM75R010

    …cutting life.* Laser-cut heat expansion slots allow the blade to expand during use to keep the cut true and straight.* Permanent red Teflon coating prevents rust and guarantees less working friction and resin adhesion.* Precision-tensioned blade bodies made of high strength steel (40-45 Rc) stay…

    4 Review(s)
    $59.97
  7. Freud® LU90M Industrial Thin Stock Non-Ferrous Metal Saw Blades

    Freud® LU90M Industrial Thin Stock Non-Ferrous Metal Saw Blades

    …are not recommended. The Silver I.C.E.™ (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.

    From: $104.47
  8. Micro Jig MJ Splitter™ for Table Saw

    Micro Jig MJ Splitter™ for Table Saw

    …mini featherboard for the keeper piece behind the saw blade.* Designed to be used on a Zero Clearance Insert with or without the Micro Jig GRR-Ripper System.* 37477 for use with 1/8" kerf saw blades only. 21505 for use with Thin Kerf Blades.* Use for making 90 degree cuts only and will not…

    14 Review(s)
    From: $30.99
  9. 10'' x 40T Forrest Woodworker II Thin Kerf General Purpose Blade

    10'' x 40T Forrest Woodworker II Thin Kerf General Purpose Blade

    This thin kerf table saw blade produces smooth as sanded rips and crosscuts in hardwoods up to 2" thick. For another option in the Forrest Woodworker II series, check out the ATB General Purpose Blade. The Woodworker II is a top-quality general purpose blade. This thin kerf version of the WWII is…

    20 Review(s)
    $119.99
  10. Forrest 10" x 60T Woodworker I General Purpose Saw Blade

    Forrest 10" x 60T Woodworker I General Purpose Saw Blade

    thin kerf general purpose blade that's perfect for table saws under 3HP. The WWI gives you scratch free and polished cuts on stock up to 2" thick. Thin kerf saves wood loss on each cut and reduces power drain on your saw. Perfect for general purpose cutting on non-sliding miter saws and table saws

    $129.99
  11. Freud® LU88R Industrial Thin Kerf Fine Finish Crosscut Saw Blades

    Freud® LU88R Industrial Thin Kerf Fine Finish Crosscut Saw Blades

    …coated blade gives new life to underpowered saws and produces smooth crosscuts in hardwoods, softwoods and moldings. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. Thin kerf blades remove less material than standard carbide blades, thus requiring…

    1 Review(s)
    From: $49.47
  12. Freud® LU77M Industrial Thin Kerf Non-Ferrous Metal Saw Blades

    Freud® LU77M Industrial Thin Kerf Non-Ferrous Metal Saw Blades

    This thin kerf, heavy-duty, non-ferrous metal cutting blade produces an excellent finish. These blades have custom designed gullets to minimize chip build-up and specially formulated carbide for long life. Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray…

    From: $62.47
  13. Freud® LU83R Industrial Thin Kerf Heavy Duty Combination Saw Blades

    Freud® LU83R Industrial Thin Kerf Heavy Duty Combination Saw Blades

    The ultimate combination blade is now available in a thin kerf design with Freud's LU83R. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut…

    24 Review(s)
    From: $49.97
  14. Freud® LU79R Thin Kerf Ultimate Plywood & Melamine Saw Blades

    Freud® LU79R Thin Kerf Ultimate Plywood & Melamine Saw Blades

    Using advanced technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine,…

    5 Review(s)
    From: $52.47
  15. Freud® LU86R Industrial Thin Kerf General Purpose Saw Blades

    Freud® LU86R Industrial Thin Kerf General Purpose Saw Blades

    …heat build-up. Perma-SHIELD® blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing it to spin freely, and eliminates pitch and debris build-up on the blade. The LU86R006M20 blade is for Festool, DeWalt, and Makita track saws.

    From: $40.97
  16. Freud® 10" x 40T Premier Fusion Thin Kerf General Purpose Saw Blade - P410T

    Freud® 10" x 40T Premier Fusion Thin Kerf General Purpose Saw Blade - P410T

    …eliminates pitch and debris build-up reducing down time for cleaning* Features Ti-Co™ Hi-Density Carbide General Purpose Blend for maximum performance* Thin kerf allows for easier feeding and reduced waste One Freud Premier Fusion Thin Kerf Saw Blade Specifications* 10" by 40 teeth* 5/8" arbor

    8 Review(s)
    $79.97
  17. Freud 10'' Thin Kerf Sawblades - 24T General Purpose and 80T Crosscut (Pack of 2)

    Freud 10'' Thin Kerf Sawblades - 24T General Purpose and 80T Crosscut (Pack of 2)

    This twin pack of Freud blades includes a 24T General Purpose Blade for ripping and dimensioning, and an 80T Ultra-Fine Crosscut Blade for the fine finishing cuts on intricate molding and joinery. Both blades feature thin-kerf technology, which is less taxing on your saw, and generates less waste.…

    $119.99 $79.99

    SAVE 33%

  18. Freud® 10" x 80T Industrial Double Sided Laminate/Melamine Saw Saw Blade - LU97M010

    Freud® 10" x 80T Industrial Double Sided Laminate/Melamine Saw Saw Blade - LU97M010

    blades needed with this blade! The Silver I.C.E.™ (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw

    2 Review(s)
    $94.97
  19. Freud® LU97R Industrial Double Sided Laminate Melamine Saw Blades

    Freud® LU97R Industrial Double Sided Laminate Melamine Saw Blades

    …No scoring blades needed with this blade! The Perma-SHIELD® coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD® blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing…

    2 Review(s)
    From: $90.47
  20. 10'' x 40T ATB Forrest Woodworker II General Purpose Blade

    10'' x 40T ATB Forrest Woodworker II General Purpose Blade

    …and sanding not required). For another option in the Forrest Woodworker II series, check out the Thin Kerf General Purpose Blade. The Woodworker II is a top-quality general purpose blade. Double hard and 40% stronger C-4 carbide will give up to 300% longer life between sharpenings. Specifications:*…

    23 Review(s)
    $119.99
  21. Magswitch® Ultimate Thin Stock Jig/Rip Guide Attachment

    Magswitch® Ultimate Thin Stock Jig/Rip Guide Attachment

    …to 3/4". The Ultimate Thin Stock Jig/Rip Guide features a fixed roller bearing and extends forward for accurate repetitive ripping of your thin stock. Ideal for thin stock hold down or in/out feed on a table saw. Enhances safety by keeping your fingers away from the blade while also minimizing…

    $21.99
  22. Irwin 10" x 80T Marathon® Trim/Finish Saw Blade

    Irwin 10" x 80T Marathon® Trim/Finish Saw Blade

    This blades features micro-grain C3 tungsten carbide tips for long life, and #400 grit diamond-ground teeth for fast, clean cuts. The thin kerfs mean less waste and less work for your saw, and fully hardened plates keep the blades running truer, longer. Features specially engineered heat vents to…

    1 Review(s)
    $52.49
  23. Irwin® 10" x 40T Marathon® General Purpose Saw Blade

    Irwin® 10" x 40T Marathon® General Purpose Saw Blade

    The long distance runner!* Thin kerf and #400 grit diamond ground teeth for fast, clean cuts. Blade has construction micro grain carbide tips for long life, plus a fully hardened plate to run truer longer. * Precision tensioned and balanced for an accurate and true cut.* With reinforced shoulder for…

    5 Review(s)
    $31.49
  24. Irwin 10" x 60T Marples ATB+R Crosscut Saw Blade

    Irwin 10" x 60T Marples ATB+R Crosscut Saw Blade

    …Crosscutting Saw Blade. Whether mounted on a miter saw or in a table saw, the razor-sharp carbide teeth and ATB+R grind will produce excellent cuts in hard and soft woods. The unique raker tooth design allows for perfectly flat-bottomed cuts in grooving applications. The blade also features a thin

    $54.99
  • Items 1 - 24 of 33
  • Page:
    1. 1
    2. 2
Feedback X