Thin Kerf Table Saw Blades

  • Items 1 - 24 of 27
  • Page:
    1. 1
    2. 2
  1. Freud® LU88R Industrial Thin Kerf Fine Finish Crosscut Saw Blades

    Freud® LU88R Industrial Thin Kerf Fine Finish Crosscut Saw Blades

    …coated blade gives new life to underpowered saws and produces smooth crosscuts in hardwoods, softwoods and moldings. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. Thin kerf blades remove less material than standard carbide blades, thus requiring…

    1 Review(s)
    From: $49.47
  2. Freud® LU97R Industrial Double Sided Laminate Melamine Saw Blades

    Freud® LU97R Industrial Double Sided Laminate Melamine Saw Blades

    …No scoring blades needed with this blade! The Perma-SHIELD® coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD® blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing…

    2 Review(s)
    From: $90.47
  3. Freud® LU87R Industrial Thin Kerf Rip Saw Blades

    Freud® LU87R Industrial Thin Kerf Rip Saw Blades

    This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD® coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4" to…

    9 Review(s)
    From: $32.97
  4. Irwin 10" x 24T Marples ATB Rip Saw Blade

    Irwin 10" x 24T Marples ATB Rip Saw Blade

    …Irwin Marples 10" 24T Saw Blade also features a thin kerf design, which reduces dust and material waste, and allows for use on all table saws, from lower-powered portable machines to high-end cabinet saws. IRWIN is proud to introduce a full line of fine woodworking saw blades that are manufactured…

    $34.99
  5. Micro Jig MJ Splitter™ for Table Saw

    Micro Jig MJ Splitter™ for Table Saw

    …mini featherboard for the keeper piece behind the saw blade.* Designed to be used on a Zero Clearance Insert with or without the Micro Jig GRR-Ripper System.* 37477 for use with 1/8" kerf saw blades only. 21505 for use with Thin Kerf Blades.* Use for making 90 degree cuts only and will not…

    14 Review(s)
    From: $30.99
  6. 10'' x 40T ATB Forrest Woodworker II General Purpose Blade

    10'' x 40T ATB Forrest Woodworker II General Purpose Blade

    …Woodworker II series, check out the Thin Kerf General Purpose Blade. The Woodworker II is a top-quality general purpose blade. Double hard and 40% stronger C-4 carbide will give up to 300% longer life between sharpenings. Specifications:* 40 teeth. * 1/8" kerf. * Teeth have 15° alternating tooth…

    23 Review(s)
    $119.99
  7. Irwin 10" x 80T Marples HI-ATB Crosscut Saw Blade

    Irwin 10" x 80T Marples HI-ATB Crosscut Saw Blade

    …delicate materials. The blade also features a thin kerf design, which reduces dust and material waste, and allows for use on all table saws, from lower-powered portable machines to high-end cabinet saws. IRWIN is proud to introduce a full line of fine woodworking saw blades that are manufactured in…

    $59.99
  8. 10'' x 40T Forrest Woodworker II Thin Kerf General Purpose Blade

    10'' x 40T Forrest Woodworker II Thin Kerf General Purpose Blade

    This thin kerf table saw blade produces smooth as sanded rips and crosscuts in hardwoods up to 2" thick. For another option in the Forrest Woodworker II series, check out the ATB General Purpose Blade. The Woodworker II is a top-quality general purpose blade. This thin kerf version of the WWII is…

    20 Review(s)
    $119.99
  9. Freud® 10" x 40T Premier Fusion General Purpose Saw Blade - P410

    Freud® 10" x 40T Premier Fusion General Purpose Saw Blade - P410

    …heat build-up. Perma-SHIELD® blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing it to spin freely, and eliminates pitch and debris build-up on the blade. Also available as a thin kerf blade. Technical Details* Laser-cut…

    8 Review(s)
    $99.97
  10. Freud® LU83R Industrial Thin Kerf Heavy Duty Combination Saw Blades

    Freud® LU83R Industrial Thin Kerf Heavy Duty Combination Saw Blades

    The ultimate combination blade is now available in a thin kerf design with Freud's LU83R. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut…

    24 Review(s)
    From: $49.97
  11. Irwin 10" x 40T Marples ATB General Purpose Saw Blade

    Irwin 10" x 40T Marples ATB General Purpose Saw Blade

    …with table saws and miter saws. The blade also features a thin kerf design, which reduces dust and material waste, and allows for use on all types of saws, from lower-powered portable machines to high-end cabinet saws. IRWIN is proud to introduce a full line of fine woodworking saw blades that are…

    $39.99
  12. Irwin 10" x 50T Marples ATB+R Combination Saw Blade

    Irwin 10" x 50T Marples ATB+R Combination Saw Blade

    …On: Table Saw, Miter Saw. About IRWIN Blades: IRWIN is proud to introduce a full line of fine woodworking saw blades that are manufactured in Italy to the highest standards of precision required for fine woodworking and finish carpentry. These industry leading laser-cut, thin kerf saw blades are…

    7 Review(s)
    $44.99
  13. Freud® LU77M Industrial Thin Kerf Non-Ferrous Metal Saw Blades

    Freud® LU77M Industrial Thin Kerf Non-Ferrous Metal Saw Blades

    This thin kerf, heavy-duty, non-ferrous metal cutting blade produces an excellent finish. These blades have custom designed gullets to minimize chip build-up and specially formulated carbide for long life. Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray…

    From: $62.47
  14. Freud® LU74R Industrial Thin Kerf Ultimate Cut-Off Saw Blades

    Freud® LU74R Industrial Thin Kerf Ultimate Cut-Off Saw Blades

    This thin kerf blade produces glass smooth surfaces when crosscutting hardwoods and softwoods, thanks to Freud's unique side grinding technology. The larger blades are ideal for miter box applications. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower…

    3 Review(s)
    From: $57.47
  15. Freud® LU79R Thin Kerf Ultimate Plywood & Melamine Saw Blades

    Freud® LU79R Thin Kerf Ultimate Plywood & Melamine Saw Blades

    Using advanced technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine,…

    5 Review(s)
    From: $52.47
  16. Freud® LU86R Industrial Thin Kerf General Purpose Saw Blades

    Freud® LU86R Industrial Thin Kerf General Purpose Saw Blades

    …heat build-up. Perma-SHIELD® blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing it to spin freely, and eliminates pitch and debris build-up on the blade. The LU86R006M20 blade is for Festool, DeWalt, and Makita track saws.

    From: $40.97
  17. Freud® LU91M Industrial Thin Kerf Sliding Compound Miter Saw Blades

    Freud® LU91M Industrial Thin Kerf Sliding Compound Miter Saw Blades

    This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5° negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove less material than standard carbide blades,

    From: $55.47
  18. Freud® LU96R Industrial Thin Kerf Double Sided Laminate Melamine Saw Blades

    Freud® LU96R Industrial Thin Kerf Double Sided Laminate Melamine Saw Blades

    The LU96R is a thin kerf blade that is designed to give long life and exellent finish on the top and bottom of laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent…

    1 Review(s)
    From: $65.97
  19. Freud® 10" x 80T Industrial Double Sided Laminate/Melamine Saw Saw Blade - LU97M010

    Freud® 10" x 80T Industrial Double Sided Laminate/Melamine Saw Saw Blade - LU97M010

    blades needed with this blade! The Silver I.C.E.™ (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw

    2 Review(s)
    $94.97
  20. Freud® 10" x 30T Industrial Thin Kerf Glue Line Rip Saw Blade - LM75R010

    Freud® 10" x 30T Industrial Thin Kerf Glue Line Rip Saw Blade - LM75R010

    With a unique triple chip tooth design, this 10" blade leaves extremely smooth, true surfaces for glue and finish work. Ideal for ripping hard and soft woods 1/8" to 1" thick. Technical Details:* A super-thin .091" kerf requires less power and allows for a faster feed rate, while laser-cut…

    4 Review(s)
    $59.97
  21. Forrest 10" x 60T Woodworker I General Purpose Saw Blade

    Forrest 10" x 60T Woodworker I General Purpose Saw Blade

    thin kerf general purpose blade that's perfect for table saws under 3HP. The WWI gives you scratch free and polished cuts on stock up to 2" thick. Thin kerf saves wood loss on each cut and reduces power drain on your saw. Perfect for general purpose cutting on non-sliding miter saws and table saws

    $129.99
  22. Freud® 10" x 40T Premier Fusion Thin Kerf General Purpose Saw Blade - P410T

    Freud® 10" x 40T Premier Fusion Thin Kerf General Purpose Saw Blade - P410T

    …cut. One blade does it all. Whether you're ripping or crosscutting, a Premier Fusion blade will tackle any project. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results. The Perma-SHIELD® coating covers the blade plate…

    8 Review(s)
    $79.97
  23. Irwin® 10" x 40T Marathon® General Purpose Saw Blade

    Irwin® 10" x 40T Marathon® General Purpose Saw Blade

    The long distance runner!* Thin kerf and #400 grit diamond ground teeth for fast, clean cuts. Blade has construction micro grain carbide tips for long life, plus a fully hardened plate to run truer longer. * Precision tensioned and balanced for an accurate and true cut.* With reinforced shoulder for…

    5 Review(s)
    $31.49
  24. Irwin 10" x 60T Marples ATB+R Crosscut Saw Blade

    Irwin 10" x 60T Marples ATB+R Crosscut Saw Blade

    …grooving applications. The blade also features a thin kerf design, which reduces dust and material waste, and allows for use on all table saws, from lower-powered portable machines to high-end cabinet saws. IRWIN is proud to introduce a full line of fine woodworking saw blades that are manufactured…

    $54.99
  • Items 1 - 24 of 27
  • Page:
    1. 1
    2. 2
Feedback X