Thinner

  • Items 1 - 24 of 44
  • Page:
    1. 1
    2. 2
  1. Qualalacq™ Lacquer Reducer

    Qualalacq™ Lacquer Reducer

    This lacquer reducer promotes excellent flow and a smooth, even lacquer finish. Makes cleanup a snap! Special blend of solvents is specially formulated for use in nitrocellulose lacquers. Technical Details:* Quart.* Ideal for use with Qualalacq Sanding Sealer, and Qualalacq Lacquers. Can only be…

    $17.99
  2. Lacquer Blush Retarder

    Lacquer Blush Retarder

    …50% or higher, Retarder should be added. Quart. Note: This product is not available in the Pasadena, Torrance Orange and Ontario stores due to AQMD VOC requirements * Quart.* Deduct any amount added from the thinner ratio. Only shipped by UPS Ground to addresses within the continental United States.

    $23.99
  3. Klean-Strip "Green" Lacquer Thinner

    Klean-Strip "Green" Lacquer Thinner

    This eco-conscious solvent outperforms standard lacquer thinner and contains 99% fewer hazardous air pollutants! Perfect for furniture restoration and finish preparation, it quickly dissolves shellac, lacquer and epoxy. Medium drying speed. Sold in quarts and gallons. Please note that this item can…

    From: $7.99
  4. VM&P Naphtha

    VM&P Naphtha

    This fast-drying solvent can be used instead of paint thinner to accelerate drying time of oil-based paints, enamel and varnish. It also is excellent as a thinner for rubber cement, adhesives and oil-based coatings and works well for cleaning brushes and spray equipment. Often used as a lubricant…

    1 Review(s)
    $10.99
  5. 100% Pure Acetone

    100% Pure Acetone

    Acetone is the strongest consumer-grade solvent available. It is ideal for thinning fiberglass resin, cleaning fiberglass tools and dissolving two-part epoxies and super glue before hardening. A heavy-duty degreaser, it is great for prepping metal before painting. Also thins polyester resins, vinyl…

    1 Review(s)
    $11.99
  6. Freud® LU86R Industrial Thin Kerf General Purpose Saw Blades

    Freud® LU86R Industrial Thin Kerf General Purpose Saw Blades

    …thin kerf blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may be cut, but some loss of surface finish may occur. The…

    From: $40.97
  7. Freud® LU72M Industrial General Purpose Saw Blades

    Freud® LU72M Industrial General Purpose Saw Blades

    This heavy-duty blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may be cut, but some loss of surface finish may occur. The…

    From: $54.97
  8. Walnut Mini-X Dowels, 100

    Walnut Mini-X Dowels, 100

    These stepped dowels are made of walnut and work with the Mini-X Miller Dowel System (21747, sold separately). The Mini-X system is designed for joining 1/2 stock (3/4" maximum) and was developed specifically for use in projects using thinner solid woods, plywood or laminate. Package of 100.

    $24.99
  9. Cherry Mini-X Dowels, 100

    Cherry Mini-X Dowels, 100

    These stepped dowels are made of cherry and work with the Mini-X Miller Dowel System (21747, sold separately). The Mini-X system is designed for joining 1/2” stock (3/4" maximum) and was developed specifically for use in projects using thinner solid woods, plywood or laminate. Package of 100.

    $24.99
  10. Oak Mini-X Dowels, 100

    Oak Mini-X Dowels, 100

    These stepped dowels are made of oak and work with the Mini-X Miller Dowel System (21747, sold separately). The Mini-X system is designed for joining 1/2 stock (3/4" maximum) and was developed specifically for use in projects using thinner solid woods, plywood or laminate. Package of 100.

    $16.99
  11. Birch Mini-X Dowels, 100

    Birch Mini-X Dowels, 100

    These stepped dowels are made of birch and work with the Mini-X Miller Dowel System (21747, sold separately). The Mini-X system is designed for joining 1/2” stock (3/4" maximum) and was developed specifically for use in projects using thinner solid woods, plywood or laminate. Package of 100.

    $14.99
  12. Freud® Lock Miter Bits - 1/2'' Shank

    Freud® Lock Miter Bits - 1/2'' Shank

    Run one board vertically and the piece to be joined horizontally. the Lock Miter Bit cuts thinner panels for projects such as humidors and jewelry boxes. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers, as well as table-mounted portable…

    From: $95.97
  13. Klean-Strip ''Green'' Pure Turpentine

    Klean-Strip ''Green'' Pure Turpentine

    Derived from all-natural tree resin, this high-grade thinner is made from 100% renewable resources. It contains no hazardous air pollutants (as defined by the EPA) and no ozone-depleting chemicals. Use it in your shop to thin varnish, stain, enamel, paint and more. Whether for equipment cleanup or…

    $9.99
  14. Rockler Undersized Plywood Router Bit Set

    Rockler Undersized Plywood Router Bit Set

    Plywood is usually thinner than the nominal measurements indicate. As a result, regular size bits usually don't cut a tight-fitting dado. Fortunately, undersized dado bits like these will help your joinery fit perfectly, resulting in stronger assemblies and nearly invisible joint lines. This set…

    10 Review(s)
    $44.99
  15. Crown Brass Back Gent's Saw

    Crown Brass Back Gent's Saw

    Manufactured by Crown Hand Tools, these saws keep a thinner blade stiff by reinforcing it with a brass back. Designed for cutting box joints, dovetails, any joinery and fine model making. Technical Details:* Made with a straight handle that extends from the top back of the blade.* Blades are…

    10 Review(s)
    From: $33.99
  16. Universal Scroll Saw Blades

    Universal Scroll Saw Blades

    …Blades may out- perform metal cutting or jewelers piercing scroll saw blades in cutting metal. Skip Tooth blades can cut cold rolled steel, copper, brass, aluminum sheet and bronze. Soft metal up to 1/8" thick can be cut easily, whether a single sheet of stock or several thinner sheets in a stack.

    From: $5.59
  17. Thinstall Universal Flat Panel Fixed Wall Mount 37-63'' Displays

    Thinstall Universal Flat Panel Fixed Wall Mount 37-63'' Displays

    This Thinstall universal flat panel fixed wall mount is the first in the industry to be thinner than the width of a penny! The low-profile design is complementary to new ultra-thin flat panel TVs. GlideLock provides tool-free latching for fast installation, and open wall plates allow easy electrical…

    $149.99
  18. Hinge Cup Spacers for BLUMotion Clip Top Hinges

    Hinge Cup Spacers for BLUMotion Clip Top Hinges

    …to be used with hinge cup hole less than 13mm deep. The spacers fill in the gaps for a solid interface. Often necessary for retrofitting or for thinner doors and narrow stiles where drilling a 13mm cup hole risks boring through the face of the door (e.g. if the door's thickness is reduced by a…

    $2.99
  19. TransTint® Dyes

    TransTint® Dyes

    …color to your project. * Available in 19 colors.* 2 oz. bottle. Mix with water for an economical, non-flammable stain or with alcohol/ lacquer thinner for a fast drying, non-grain raising stain. For use as a finish toner, simply add the dye concentrate to shellac, water-base finishes, solvent…

    1 Review(s)
    $20.99
  20. Rockler Undersized Straight Router Bits - 1/4" Shank

    Rockler Undersized Straight Router Bits - 1/4" Shank

    These straight bits are slightly undersized to cut tight-fitting grooves and dadoes for plywood that is thinner than its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut…

    21 Review(s)
    From: $13.99
  21. Rockler Undersized Straight Router Bits - 1/2" Shank

    Rockler Undersized Straight Router Bits - 1/2" Shank

    These straight bits are slightly undersized to cut tight-fitting grooves and dadoes for plywood that is thinner than its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut…

    21 Review(s)
    From: $14.49
  22. Freud® LU82M Industrial Heavy Duty Multi-Purpose Saw Blades

    Freud® LU82M Industrial Heavy Duty Multi-Purpose Saw Blades

    …blade's deep gullets and TCG rip and crosscut through hardwoods and softwoods with ease. Although the ideal working range is 1/2" to 2-3/4" thick, thinner or thicker materials may be cut, resulting in some loss of surface finish. The Silver I.C.E.™ (Industrial Cooling Element) coating helps…

    From: $68.47
  23. Freud® LM71M Industrial Thick Stock Rip Saw Blades

    Freud® LM71M Industrial Thick Stock Rip Saw Blades

    …manual feeding as well as with power feeders in single or gang-ripping operations. The ideal working range is 1-1/2" to 3-1/2" thick. Thinner or thicker material may be cut, but some loss of surface finish may occur. The Silver I.C.E.™ (Industrial Cooling Element) coating helps…

    From: $64.97
  24. Rockler Universal Fence Clamps

    Rockler Universal Fence Clamps

    …clamps will do it all! Includes 2 clamps. * Rigid aluminum body with steel threaded components.* Range of travel 1/2"-5-3/4" (1/2" minimum assumes a 3/4" auxiliary fence; you can clamp to an even thinner primary fence if you use a thicker auxiliary fence).* Drill a 3/8" hole in the auxiliary fence.

    286 Review(s)
    $19.49
  • Items 1 - 24 of 44
  • Page:
    1. 1
    2. 2
Feedback X