Thread Tap

  • Grid List
  • Page:
    1. 1
  • Items 1 - 19 of 19
  • Page:
    1. 1
  1. Tap for Rolling Barn Door Track

    Tap for Rolling Barn Door Track

    This tap is used for cutting threads in the 6' track included with our Rolling Barn Door Hardware Kits (sold separately). Threads must be tapped in the ends of the track so that the end stops may be installed. The 6' tracks arrive untapped, so the ends must be tapped even if the track is intended to…

    $5.99
  2. Festool Domino® XL DF700 Joiner Set (574447) .

    Festool Domino® XL DF700 Joiner Set (574447) .

    …will apply for Express delivery and heavy/oversized items. Not valid at Rockler Retail stores or Independent Partner Resellers. For those looking to tap the true mortising potential of the Domino joinery system, the Domino XL DF700 boasts one spec you need to know: massivemortises up to 2-3/4" deep…

    1 Review(s)
    $1,325.00
  3. Kreg® Coarse/Fine Maxi-Loc- Square Drive-Washer Head- Pocket Hole Screws-#8 Screws

    Kreg® Coarse/Fine Maxi-Loc- Square Drive-Washer Head- Pocket Hole Screws-#8 Screws

    …250, 500 or new 1,000 packs. Washer head seats screw, preventing a crushed pocket & run through.* For softwoods and particleboard, the coarse thread gives you the driving and holding you need, with a self-tapping wood auger tip.* The square drive washer head properly seats the screw in the…

    20 Review(s)
    From: $3.59
  4. Hex Drive Threaded Inserts-Choose size

    Hex Drive Threaded Inserts-Choose size

    Use for a tight grip! Larger teeth give increased holding strength, ideal for end grain and particle board applications. Made of die cast zinc alloy. Has a self tapping harpoon thread. Thread listed is the size of the internal thread size. Sold in pack of 8.

    16 Review(s)
    $6.99
  5. Beer Bottle Tap Handle Blank

    Beer Bottle Tap Handle Blank

    …comes with a 3/8" - 16tpi threaded insert pre-installed for direct mounting to your beer tap-no need for a ferrule or finial. Bottle blank is 2-3/8" dia. x 9-1/2"L. Technical Details:* Unfinished solid hard maple.* Pre-installed 3/8" - 16tpi threaded insert.* 2-3/8" dia. x…

    $14.99
  6. Kreg® Maxi-Loc Hi-Lo Threads

    Kreg® Maxi-Loc Hi-Lo Threads

    Dual thread design makes this an all-purpose screw for a variety of wood species.* Self-tapping auger point* Washer head that seats flush with the bottom of the boring hole* Uses a #2 square drive

    1 Review(s)
    From: $4.49
  7. Thin Stock Threaded Inserts, 4-Pack

    Thin Stock Threaded Inserts, 4-Pack

    …with a 10-32 threading. Technical Details:* Since the Thin Stock Threaded Insert is flat, it doesn't require the thick materialof a normal threaded insert. * Wide profile spreads out the load of the screw to prevent pull-through. * Tapped to accept any bolt with a 10-32 threading. * Use a 3/32"…

    $4.99
  8. Kreg™ 675-Pc. Self-Tapping Pocket Hole Screw Kit

    Kreg™ 675-Pc. Self-Tapping Pocket Hole Screw Kit

    …and features a comfortable domed handle for easy transport. * Use #6 x 1" pan-head fine thread screw when joining material to hardwood. For use in 1/2" thick stock.* Use #7 x 1-1/4" washer-head fine thread screw when joining material to hardwood, such as hardwood face frames, attaching edge-banding,…

    9 Review(s)
    $29.99
  9. Recex® Square-Phillips Combination Recess Screw

    Recex® Square-Phillips Combination Recess Screw

    …Recex® #2 Square-Phillips Combination Recess Screw is a thread cutting screw perfect for using in any wood. The special head allows it to predrill itself, making entry easy and without splitting.* Coarse tapping screw thread and special long sharp point is fluted to capture chips* #2…

    From: $3.49
  10. Recex® Recess Prelubed Screws-Round

    Recex® Recess Prelubed Screws-Round

    …#2 Square-Phillips Combination Recess Screws are a thread cutting screw perfect for using in any wood. This special head allows it to predrill itself, making entry easy and prevents splitting. Technical Details:* Coarse tapping screw thread and special long sharp point is fluted to capture chips.*…

    $16.99
  11. Recex® Recess Prelubed Screws-Flat

    Recex® Recess Prelubed Screws-Flat

    …#2 Square-Phillips Combination Recess Screws are a thread cutting screw perfect for using in any wood. This special head allows it to predrill itself, making entry easy and prevents splitting. Technical Details:* Coarse tapping screw thread and special long sharp point is fluted to capture chips.*…

    $16.99
  12. Combo Cork Screw and Stopper

    Combo Cork Screw and Stopper

    …it unscrews to reveal a handy cork screw. For best results, use the drill bit and tap listed below. This 3/8" tap cuts threads in your bottle stopper blank for easy mounting of the stopper/corkscrew hardware. Threads will also help form a tighter bond between your turned blank and the stopper during…

    $9.99
  13. 11/32" Split Point Drill Bit

    11/32" Split Point Drill Bit

    …it unscrews to reveal a handy cork screw. For best results, use the drill bit and tap listed below. This 3/8" tap cuts threads in your bottle stopper blank for easy mounting of the stopper/corkscrew hardware. Threads will also help form a tighter bond between your turned blank and the stopper during…

    $6.29
  14. Kreg Stainless Steel Washer Head Screws

    Kreg Stainless Steel Washer Head Screws

    …fine thread screws for hardwoods; coarse thread screws for soft woods and plywood. Technical Details: * 100% stainless steel pocket screws.* Self-tapping screw tips.* Deep-seated #2 square drive heads.* Stainless steel Kreg screws are available in fine thread for hardwoods; coarse thread for soft…

    7 Review(s)
    From: $18.99
  15. Saberdrive™ Interior Wood Screws-#6 Wood Screws

    Saberdrive™ Interior Wood Screws-#6 Wood Screws

    …and the threads are serrated so they won't work loose over time. Type 17 point helps you drive the screw without a pilot hole in self-tapping applications. Technical Details:* Star drive (Torx-style) head is extremely resistant to stripping.* Hardened steel for durability.* Serrated thread helps the…

    From: $1.89
  16. Saberdrive™ Interior Wood Screws-#8 Wood Screws

    Saberdrive™ Interior Wood Screws-#8 Wood Screws

    …and the threads are serrated so they won't work loose over time. Type 17 point helps you drive the screw without a pilot hole in self-tapping applications. Technical Details:* Star drive (Torx-style) head is extremely resistant to stripping.* Hardened steel for durability.* Serrated thread helps the…

    From: $1.89
  17. Saberdrive™ Interior Wood Screws-#9 Wood Screws

    Saberdrive™ Interior Wood Screws-#9 Wood Screws

    …and the threads are serrated so they won't work loose over time. Type 17 point helps you drive the screw without a pilot hole in self-tapping applications. Technical Details:* Star drive (Torx-style) head is extremely resistant to stripping.* Hardened steel for durability.* Serrated thread helps the…

    $1.89
  18. Robert Sorby Sovereign Turning Handles-Sovereign Handle

    Robert Sorby Sovereign Turning Handles-Sovereign Handle

    …models thread off, and a Threaded Coupler is available so that two handles can be combined for extra length. An accessory Counterweight can also be attached when additional weight is desired for balance at the butt end of the handle. The 16" and 22" models also have a tapped hole on…

    From: $51.99
  19. Oneway Stronghold Chuck

    Oneway Stronghold Chuck

    …prevention system ensures that the base jaws will never come loose during operation. Choose a separate Taper-Lock Adapter below to match the threads on your lathe. A wide range of accessory jaws are available to cover all your turning requirements. The #3 Jaws have the mass and size necessary…

    3 Review(s)
    $274.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 19 of 19
  • Page:
    1. 1
Feedback X