Threaded Brass Inserts

  • Grid List
  • Page:
    1. 1
  • Items 1 - 11 of 11
  • Page:
    1. 1
  1. Threaded Brass Inserts - Select size

    Threaded Brass Inserts - Select size

    Threaded brass inserts guaranteed not to rust. Made from solid brass. Size listed is the size of the internal machine threads. Sold in packs of 8. Can be installed with screwdriver, threaded insert wrench or threaded insert power drive.Solid brass threaded insert is easy to install. Drill a hole the…

    8 Review(s)
    From: $7.19
  2. 2" T-Knob

    2" T-Knob

    …a threaded insert made of brass. The hole runs all the way through the knob, so there's no risk of the T-bolt bottoming out on the plastic. Choose from two different thread patterns. Technical Details: * 2" knob with textured surface* Threaded insert made of brass* Choose from two different thread

    32 Review(s)
    From: $1.89
  3. Swivel Mirror Screws

    Swivel Mirror Screws

    Swivel Mirror Screws give your mirror old-fashioned charm! Allows easy mirror movement. A 3-1/2" long steel bolt with a styled brass head. Includes 2-1/4" threaded insert. The threaded insert length of thread is 9/16 with a 3/16" thick head, (3/4" overall).

    9 Review(s)
    From: $12.59
  4. Brass Cane Hardware

    Brass Cane Hardware

    …handle to the stick. Technical Details* All parts machined from solid brass* Threaded insert fits into a 13/32" diameter x 7/8" deep hole and has a flange diameter of 25/32"* Cane tip is 19/32" in diameter and fits onto a 31/64" tenon* For best results, use epoxy to install tip and threaded insert

    2 Review(s)
    $5.99
  5. Pizza Cutter/Bottle Opener Turning Mandrel

    Pizza Cutter/Bottle Opener Turning Mandrel

    …Bottle Opener/Pizza Cutter Turning Mandrel is 2-1/2".* 3/8" diameter smooth shaft fits into lathe chuck.* Threaded end of turning mandrel has a 5/16" thread that threads into the insert, which you install in your turning blank.* Shoulder of turning mandrel is 1" in diameter, the same final diameter…

    1 Review(s)
    $10.49
  6. Rockler Stainless Steel Pizza Cutter Turning Kit, Chrome Finish

    Rockler Stainless Steel Pizza Cutter Turning Kit, Chrome Finish

    …in a brass finish. See our complete line of Turning Stock to complete your project. Methods to consider for installing the threaded insert are: Use a 5/16" bolt and double nuts on a drill press. Cut the head off a 5/16" bolt and chuck it in a drill press. Then thread on two nuts and the insert so…

    22 Review(s)
    $19.99
  7. Stainless Steel Pizza Cutter Turning Kit, Brass Finish

    Stainless Steel Pizza Cutter Turning Kit, Brass Finish

    …press chuck to drive the insert into the stock. Safety Tip: MAKE SURE DRILL PRESS IS UNPLUGGED. The drill press will keep the insert square to the stock as it is threaded in. We also recommend using beeswax, screw lube, or even soap to lubricate the threads on the insert.* This process can also be…

    $19.99
  8. Ball Knob for Shop Jigs

    Ball Knob for Shop Jigs

    Ball knob has an easy-grip round profile. The 2" diameter fits securely in your palm. Made from rugged plastic with 5/16" -18 threaded brass insert.

    $3.19
  9. Plastic Leveler Glides

    Plastic Leveler Glides

    …engineered plastic to provide a smooth gliding surface. Technical Details* Base is 1-1/8" in diameter x 3/8" high* Bolt Length: 1-1/2"* Stem is made of zinc plated steel Best Used With: Steel 5/16"-18 Threaded Inserts, Brass 5/16"-18 Threaded Inserts, Hex Drive 5/16"-18 Threaded Inserts or T-Nuts

    5 Review(s)
    $5.99
  10. Mortise Centering Router Base

    Mortise Centering Router Base

    …centered every time!* Plate is constructed of 1/4" Acrylic with 1-1/2" opening, and is transparent for visibility.* Solid brass guides thread easily into 3 different insert settings for a variety of wood thicknesses and for non-centered mortises.* Predrilled hole pattern fits: Porter Cable 690/890…

    10 Review(s)
    $19.99 $14.99

    SAVE 25%

  11. Robert Sorby Sovereign Turning Handles-Sovereign Handle

    Robert Sorby Sovereign Turning Handles-Sovereign Handle

    …collet (47155, sold separately). A tang collet and a 3/8" collet are also available. The aluminum ends on all Sovereign models thread off, and a Threaded Coupler is available so that two handles can be combined for extra length. An accessory Counterweight can also be attached when additional…

    From: $51.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 11 of 11
  • Page:
    1. 1
Feedback X