Threaded Insert Bit

  • Grid List
  • Page:
    1. 1
  • Items 1 - 12 of 12
  • Page:
    1. 1
  1. Power Drive Threaded Insert Tool

    Power Drive Threaded Insert Tool

    Choose the right tool for your job! For driving threaded inserts with slotted heads accurately and quickly, choose the Power Drive Threaded Insert Tool. Works with most variable-speed drills.* All-steel construction* Recommended for inserts with screwdriver slot at the top* Made in USA

    10 Review(s)
    From: $10.99
  2. Tee Nuts-Select size

    Tee Nuts-Select size

    …appropriately sized clearance hole for the threaded barrel and hammer into place. Tee nuts are made of high quality steel and available in a variety of sizes. Technical Details * Available in three common thread sizes * Requires only a drill, drill bit and hammer for installation * Made of high…

    4 Review(s)
    From: $2.59
  3. 3-Prong T-Nuts

    3-Prong T-Nuts

    threaded glides, casters, and more. Simply drill an appropriately sized clearance hole for the threaded barrel and hammer into place. Made of high-quality steel and available in a variety of sizes. Technical Details:* Available in three common thread sizes* Requires only a drill, drill bit and…

    From: $2.59
  4. Fulcrum Pins for Rockler Router Table Plates

    Fulcrum Pins for Rockler Router Table Plates

    …becomes impossible to use a straight fence for stability, so a guide pin is used. Fulcrum pins are most commonly used with bearing guided router bits, so that the bearing and fulcrum pin form two points in a line for stability. More than one pin can be used for more versatility and more complicated…

    $4.49
  5. Bed Rail Connection System

    Bed Rail Connection System

    …through-hole in the bed rail, and a 17/32" hole in the bed post to house the threaded insert. TIP: To speed installation and ensure accurate drilling, use the Rockler JIG-IT Drill Guide and 35mm Long Shank Forstner Bit for the bed rail boring. The JIG-IT sets up quickly to produce accurately placed,…

    8 Review(s)
    $13.69
  6. Stainless Steel Pizza Cutter Turning Kit, Brass Finish

    Stainless Steel Pizza Cutter Turning Kit, Brass Finish

    …press chuck to drive the insert into the stock. Safety Tip: MAKE SURE DRILL PRESS IS UNPLUGGED. The drill press will keep the insert square to the stock as it is threaded in. We also recommend using beeswax, screw lube, or even soap to lubricate the threads on the insert.* This process can also be…

    $19.99
  7. Salt and Pepper Shaker Turning Kit

    Salt and Pepper Shaker Turning Kit

    …quality inserts. Set includes two threaded inserts with chrome-plated tops; one hole for the pepper, three holes for the salt. Durable plastic bodies taper slightly toward the base, assuring an easy fit into your custom turned shakers. Items You Might Need Individual Standard Forstner Bits, High…

    0 Review(s)
    $9.99
  8. Bench Cookie® Plus Work Grippers with Bench Cookie® Risers

    Bench Cookie® Plus Work Grippers with Bench Cookie® Risers

    …Cookie® Plus Work Grippers* (2) Standard Risers Bench Cookie® Plus Work Grippers:* Features a 5/16-18 threaded insert.* Bench Cookie® Plus measures 3" x 1".* Threaded insert accepts standard and XL Risers.* Rout, sand, cut and carve without using clamps.* Raise up workpieces for easy…

    7 Review(s)
    $16.98
  9. Rockler Router Table Plates

    Rockler Router Table Plates

    threaded inserts to accept the lock-down bolts included with the plates. 1/4" Aluminum Router Plates Predrilled for Most Routers: To choose an aluminum plate, find your router in one of the four groups below. If your router is not listed, choose either the Standard Blank Plate (with a 3-1/4'' bit

    8 Review(s)
    $59.99
  10. Bench Cookie® Plus Master Kit

    Bench Cookie® Plus Master Kit

    …Standard Risers* (8) Bench Cookie® Finishing Cones Bench Cookie® Plus Work Grippers:* Features a 5/16-18 threaded insert.* Bench Cookie® Plus measures 3" x 1".* Threaded insert accepts standard and XL Risers.* Rout, sand, cut and carve without using clamps.* Raise up workpieces for easy…

    8 Review(s)
    $59.99 $39.99

    SAVE 33%

  11. Bench Dog® Router Table Plates

    Bench Dog® Router Table Plates

    …it's not listed, simply custom-drill either of Bench Dog's two blank-plate options to fit your router. All plates include an insert with a 1-1/2" bit opening. Optional inserts sold separately.* Group A routers: Makita 1100; Milwaukee 5615-5624; DeWalt 616-618; Bosch 1617-1618; Ridgid 2930 Combo Kit;…

    7 Review(s)
    $64.99
  12. Bench Cookie Plus® Work Grippers Starter Kit

    Bench Cookie Plus® Work Grippers Starter Kit

    …Standard Risers* (4) Bench Cookie® Finishing Cones Bench Cookie Plus® Work Grippers:* Features a 5/16-18 threaded insert.* Bench Cookie Plus® measures 3" x 1".* Threaded insert accepts standard and XL Risers.* Rout, sand, cut and carve without using clamps.* Raise up workpieces for easy…

    8 Review(s)
    $27.46
  • Grid List
  • Page:
    1. 1
  • Items 1 - 12 of 12
  • Page:
    1. 1
Feedback X