Threading Tool

  • Items 1 - 24 of 66
  • Page:
    1. 1
    2. 2
    3. 3
  1. Power Drive Threaded Insert Tool

    Power Drive Threaded Insert Tool

    Choose the right tool for your job! For driving threaded inserts with slotted heads accurately and quickly, choose the Power Drive Threaded Insert Tool. Works with most variable-speed drills.* All-steel construction* Recommended for inserts with screwdriver slot at the top* Made in USA

    10 Review(s)
    From: $10.99
  2. Thread Detective Screw Gauge

    Thread Detective Screw Gauge

    …you just want to figure out which nuts and bolts to use where, the Thread Detective is the perfect tool. Available in standard or metric, it features clearly marked gauges for quick identification ofbolt size, nut diameter and thread pitch. Standard gauges are black with 14 measuring gauges. Metric…

    34 Review(s)
    $17.99
  3. Riveting T-Nut Inserting Tool

    Riveting T-Nut Inserting Tool

    …this problem by permanently securing the T-nut to the panel with the Riveter Insertion Tool. Simply set the T-nut first with a hammer, then thread the insertion tool into it with a power drill. The tool folds over the end of the T-nut, creating a neat, clean mushroomed end that holds the T-nut…

    8 Review(s)
    $11.49
  4. Steel Threaded Inserts - Select size

    Steel Threaded Inserts - Select size

    …Size listed below is the size of the bolt (sold separately) that threads into the insert. Sold in packs of 8. Technical Details:* Can be installed with screwdriver, threaded insert wrench or threaded insert power drive tool.* Rugged steel construction.* Can be used for wood/wood joints, or…

    10 Review(s)
    From: $4.49
  5. Robert Sorby Sovereign Turning Handles-Sovereign Handle

    Robert Sorby Sovereign Turning Handles-Sovereign Handle

    …brass to prevent damage to your turning tools.* All handles will take turning chisels with a 5/8" diameter shaft.* 3/8", 1/2" and Tang collets are available separately to accept a wide variety of turning tool shanks. (Note: American-made tools are measured by bar diameter while…

    From: $51.99
  6. Rockler Lathe Tool Rests

    Rockler Lathe Tool Rests

    …mini and midi lathes. Technical Details:* 5/8" diameter mounting post fits most mini and midi lathes.* 5/16" round stainless steel tool rest.* Cast steel body with black epoxy finish.* Integrated mounting post (not threaded) so it won't loosen with vibration or impact.* 3 sizes: 4", 6" and 10" long.

    5 Review(s)
    From: $19.99
  7. Rockler Crown Molding Support

    Rockler Crown Molding Support

    "Many hands make light work" is a suitable motto for the new Crown Support from Bench Dog Tools. What used to require an assistant and a second ladder is now portable, permanent and unfailingly reliable. Unlike similar products on the market, the Bench Dog Crown Support straddles the molding,…

    6 Review(s)
    $31.99
  8. Threaded Quick Coupler

    Threaded Quick Coupler

    This threaded quick coupler has one 2-1/2" end with threads that fit our 2-1/2" Clear Hose (22784), while the opposite end is flared for standard tool 4" ports. 2-1/4" I.D., 2-1/2" O.D., 2-7/8" Long.

    $5.99 $4.49

    SAVE 25%

  9. Jet 1221VS 12'' x 21'' Variable Speed Wood Lathe

    Jet 1221VS 12'' x 21'' Variable Speed Wood Lathe

    …speed* Optimally designed speed ranges* Forward to reverse is a smooth transition* Innovative ratchet style belt tension system (patent pending)* Integrated, spring loaded spindle lock* Conveniently located controls and DRO* Acme thread in tailstock* 24 integrated indexing positions* 5 Year Warranty

    2 Review(s)
    $799.99
  10. Threaded Coupler for Robert Sorby Sovereign Handles

    Threaded Coupler for Robert Sorby Sovereign Handles

    …hard woods or when additional reach is needed. The increased weight also helps counterbalance the tool when heavy chisels are installed in the handle. Technical Details:* The Sovereign Threaded Coupler is machined from high-grade aluminum.* Hole allows you to tighten the coupler with an ordinary…

    $15.99
  11. Side Handle SOV-SH for Sorby Sovereign Turning Tool System

    Side Handle SOV-SH for Sorby Sovereign Turning Tool System

    …and control to your Sorby Sovereign Handle with this similarly designed side handle. The threaded end simply screws into the threaded opening on the side of the Sovereign handle to maximize command of your tools. Extra control is especially useful for deep hollowing applications. Softex grip dampens…

    $22.49
  12. Riveting T-nut for 5/8" thick material (10 per Pack)

    Riveting T-nut for 5/8" thick material (10 per Pack)

    Special T-nuts for use with the Riveting T-Nut Insertion Tool (30167, sold separately) in 5/8" thick material. The tool folds over the end of the T-nut, creating a neat, clean mushroomed end that holds the T-nut firmly in place. T-nut internal thread size: 1/4"-20. Package of 10.

    $4.49
  13. Riveting T-nut for 3/4" thick material (10 per Pack)

    Riveting T-nut for 3/4" thick material (10 per Pack)

    Special T-nuts for use with the Riveting T-Nut Insertion Tool (30167, sold separately) in 3/4" thick material. The tool folds over the end of the T-nut, creating a neat, clean mushroomed end that holds the T-nut firmly in place. T-nut internal thread size: 1/4"-20. Package of 10.

    $4.99
  14. Riveting T-nut for 1/2" thick material (10 per Pack)

    Riveting T-nut for 1/2" thick material (10 per Pack)

    Special T-nuts for use with the Riveting T-Nut Insertion Tool (30167, sold separately) in 1/2" thick material. The tool folds over the end of the T-nut, creating a neat, clean mushroomed end that holds the T-nut firmly in place. T-nut internal thread size: 1/4"-20. Package of 10.

    $3.99
  15. Rockler FlexForm™ Hose Kit - 2-1/2'' Diameter

    Rockler FlexForm™ Hose Kit - 2-1/2'' Diameter

    …One Narrow Nozzle Tool* One Wide Nozzle Tool Technical Details:* Hose expands to three times its collapsed length, from approximately 12" to 36"* Included 2-1/2" OD hose adapters twist onto the FlexForm 2-1/2" ID Hose (left-hand threads) resulting in 2-1/4" OD hose ends* Nozzle Tools are 2-1/4" ID*…

    9 Review(s)
    $21.99 $16.49

    SAVE 25%

  16. Fulcrum Pins for Rockler Router Table Plates

    Fulcrum Pins for Rockler Router Table Plates

    …Router Table Plates. Technical Details:* These Router Table Fulcrum Pins feature solid metal construction for a solid connection and long life.* 1/4 - 20 threading fits Rockler and Bench Dog Router Table Plates with no modification.* Fulcrum Pins measure approximately 1/2" in diameter x 3/4" long.

    $4.49
  17. Nova DVR 2024 20'' x 24'' Lathe

    Nova DVR 2024 20'' x 24'' Lathe

    …10 presets for favorite speed settings.Specifications:* 2HP 220v intelligent DVR motor.* 100 - 5000 RPM variable speed.* 20" swing over bed.* 24" distance between centers* Drive spindle: 1-1/4" 8 TPI, RH Thread.* #2MT self-ejecting tailstock.* 12" tool rest.* 3" faceplate.

    $3,149.99
  18. Jet® JWL-1015VS 10'' x 15'' Variable Speed Wood Lathe

    Jet® JWL-1015VS 10'' x 15'' Variable Speed Wood Lathe

    …1050, 300 - 1750 and 600 - 3600 RPM* Number of indexing positions: 24* Distance between centers: 15-1/2"* Swing over tool rest base: 7-5/16"* Swing over bed: 10"* Spindle thread: 1"-8TPI* Spindle bore: 3/8"* Taper in tailstock spindle: MT2* Tailstock spindle travel: 2"* Quill travel: 2"* Quill…

    $579.99
  19. Jet® JWL-1015 10'' x 15'' Wood Lathe

    Jet® JWL-1015 10'' x 15'' Wood Lathe

    …840, 1240, 1800, 2630 and 3975 RPM* Number of indexing positions: 24* Distance between centers: 15-1/2"* Swing over tool rest base: 7-5/16"* Swing over bed: 10"* Spindle thread: 1"-8TPI* Spindle bore: 3/8"* Taper in tailstock spindle: MT2* Tailstock spindle travel: 2"* Quill travel: 2"* Quill taper:…

    $479.99
  20. Mortise Centering Router Base

    Mortise Centering Router Base

    …perfectly centered every time!* Plate is constructed of 1/4" Acrylic with 1-1/2" opening, and is transparent for visibility.* Solid brass guides thread easily into 3 different insert settings for a variety of wood thicknesses and for non-centered mortises.* Predrilled hole pattern fits: Porter Cable…

    10 Review(s)
    $19.99 $14.99

    SAVE 25%

  21. Infiniter® RS-1 Laser Cutting Guide

    Infiniter® RS-1 Laser Cutting Guide

    …and handheld circular saws.* Easy to install and use!* Powered by three alkaline batteries (included).* 5/8" arbor with squared end and internal threading. Easy installation: simply replace the outer blade washer of your miter saw with the laser guide unit.* Does not fit 12" Ridgid, Pro-Tech, Makita…

    118 Review(s)
    $29.99
  22. Counterweight for Robert Sorby Sovereign Handles

    Counterweight for Robert Sorby Sovereign Handles

    tool when very large chisels are installed in the handle. The counterweight installs inside the Sovereign handle, opposite the cutting end - simply unscrew the end cap and thread the counterweight into the inside of the end cap. Technical Details:* Heavy steel provides balances your turning tool

    $14.99
  23. Tormek® Magnum Bundle

    Tormek® Magnum Bundle

    …and Dressing Tool with screw feed: Trues the grindstone exactly round and flat. Guided by the Universal Support, which also guides the jigs. Dual knobs for smooth feed across the stone* Stainless steel hardware: Prevents rust and wear on bearings* Universal Support with acme thread: Round section…

    $1,149.00
  24. Tormek® Ultimate Bundle

    Tormek® Ultimate Bundle

    …and Dressing Tool with screw feed: Trues the grindstone exactly round and flat. Guided by the Universal Support, which also guides the jigs. Dual knobs for smooth feed across the stone* Stainless steel hardware: Prevents rust and wear on bearings* Universal Support with acme thread: Round section…

    $1,315.00
  • Items 1 - 24 of 66
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X