Tool Rest

  • Items 1 - 24 of 74
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Lathe Tool Rests

    Rockler Lathe Tool Rests

    …finger along the edge of Rockler's premium Lathe Tool Rests, and you'll know instantly what a pleasure they are to use. That's because each tool rest is capped with a 5/16" round stainless steel bar, providing a silky smooth surface for your turning tools to glide across, and a comfortable contour…

    5 Review(s)
    From: $19.99
  2. Nova Tool Rest

    Nova Tool Rest

    The tool rest is one of the most important features on any lathe. The rest should allow for maximum flexibility of chisel movement and provide adequate chisel support as close to the cutting edge as possible. These Nova tool rests are made of cast iron for excellent rigidity, and come with a…

    From: $26.99
  3. Tormek Woodturner's Accessory Kit TNT-708

    Tormek Woodturner's Accessory Kit TNT-708

    …turning tools! Compatible with Tormek T-7 and T-3 Models. Technical Details:* Shape and sharpen all your turning tools* Gouge Jig (SVD-185) for fingernail shaped bowl gouges and spindle gouges - maximum tool width is 25mm* Tool Rest (SVD-110) for scrapers, hollowing tools, and thin parting tools*

    1 Review(s)
    $334.00
  4. Nova Outrigger Lathe Accessory

    Nova Outrigger Lathe Accessory

    …The outrigger is made from solid cast iron for optimum strength, stability, and vibration-free performance. Note: Tool rest is not included (the outrigger accepts the same tool rest that comes with your lathe). * Fits Nova 3000, Nova DVR, Nova DVR XP and Nova 1624-44 lathes (sold separately). *…

    $284.99
  5. Rockler Round Carbide Mini Turning Tool

    Rockler Round Carbide Mini Turning Tool

    …the tool rest.* The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue. Technical Details:* Ideal for giving you a smooth finish on curved, concave surfaces and for general turning applications.* Total overall length of Mini Turning Tool is…

    1 Review(s)
    $69.99
  6. Carter Multi-Rest™ Work Support System

    Carter Multi-Rest™ Work Support System

    …beds with way sizes from 1" to 4.5" in width.* Multi-ring structure creates great rigidity while keeping the tool's weight to half that of a comparable full steel rest.* High strength, laser cut steel and aircraft grade aluminum components assure the ultimate in strength and durability.*…

    $359.95
  7. Robert Sorby Spiralling System

    Robert Sorby Spiralling System

    …on turned pieces. The Robert Sorby Spiralling System is a further development on the texturing tool and is used to create both left and right handed spirals with ease. It features an innovative rest with indexed reference positions, which enable the replication of the spirals. Differing pitch and…

    $189.99
  8. Powermatic® Wood Lathe 2HP

    Powermatic® Wood Lathe 2HP

    …chrome-trimmed handwheels and a laser-etched, self-ejecting quill. The tool rest assembly also has improved locking on a new profile tool rest that can accommodate an optional dust hood assembly that travels with the tool rest. Additional features include a set of dead centers to hold a spindle for…

    $3,999.99
  9. 1/2" Tenon-Lok™  Dovetail Drill Bit

    1/2" Tenon-Lok™ Dovetail Drill Bit

    …the base of the mortise for the wedge ring to rest in. Using the 1/2" Tenon-Lok™ Dovetail Drill Bit: 1. Drill a standard 1/2" round mortise with a forstner bit or another bit of your choice. 2. Chuck the 1/2" Tenon-Lok™ cutting tool in your drill. 3. Before starting the drill, position…

    2 Review(s)
    $25.49
  10. Robert Sorby Handled TurnMaster Turning Tools-TurnMaster

    Robert Sorby Handled TurnMaster Turning Tools-TurnMaster

    …nitride coated M2 HSS. How to use the TurnMaster:* Set the head in a neutral position so that the cutter is horizontal when the tool is held flat on the lathe tool rest.* This is done by loosening the locking collar with the unique wrench and rotating the collar a minimum of two and half turns,…

    From: $108.99
  11. Tormek® Ultimate Bundle

    Tormek® Ultimate Bundle

    …Kit Details:* Shape and sharpen all your turning tools* Gouge Jig (SVD-185) for fingernail shaped bowl gouges and spindle gouges - maximum tool width is 25mm* Tool Rest (SVD-110) for scrapers, hollowing tools, and thin parting tools* Turning Tool Setter (TTS-100T) with built-in edge geometries*…

    $1,315.00
  12. Work Sharp WS2000 Tool Sharpener

    Work Sharp WS2000 Tool Sharpener

    …port prevents the tool from overheating, and the completely dry system eliminates the mess of water and oil. Sharpens edges up to 1-5/8" wide in the port, and as large as you want on the top of the wheel. Tool rest allows you to easily sharpen axes and other large tools. Includes two double-sided…

    18 Review(s)
    $79.99
  13. Nova Soft Jaw Set

    Nova Soft Jaw Set

    …to the side of the scraper. It will cut on both sides and on the end.* Recommended bevel angle is about 70 degrees.* When scraping nylon, the tool rest must be as close to the work as possible and you must always use a light touch.* Run your lathe at a speed between 1700 and 2000 rpm for best…

    $18.99
  14. Tormek Bench Grinder Mounting Set

    Tormek Bench Grinder Mounting Set

    …System or your Bench Mount Grinder* The principle for setting the shape and edge angle is the same regardless of which machine you use OPTIONAL ACCESSORIES :* 18772 - Universal Gouge Jig (SVD-185)* 60483 - Tool Rest (SVD-110)* 37592 - Multi-Jig (SVS-50)* 24201 - Tormek Turning Tool Setter (TTS-100)

    $66.00
  15. Hollowing Tools SOV-RS for Sorby Sovereign Turning Tool System-Tools

    Hollowing Tools SOV-RS for Sorby Sovereign Turning Tool System-Tools

    Sorby's Multi-Tip Hollowing Tool (31747) and Hollowmaster (39659) combine to take you from start to finish in your hollowing projects. The Multi-Tip Hollowing Tool features a broad 3/4" flat surface in permanent contact with the tool rest, giving you maximum stability and control for anything from…

    1 Review(s)
    $68.99 From: $43.99

    SAVE 36%

  16. Scheppach 8'' Variable Speed Bench Grinder

    Scheppach 8'' Variable Speed Bench Grinder

    …aluminum tool rests provide excellent workpiece support. Use as a benchtop grinder, or pair with the optional pedestal stand (44676, sold separately).* Cast iron base provides stability and reduces vibration.* Locking ON/OFF switch prevents unauthorized use.* Die cast aluminum tool rests adjust to…

    $129.00
  17. Jet® 16'' x 42'' Wood Lathe 1.5HP

    Jet® 16'' x 42'' Wood Lathe 1.5HP

    …can operate the machine at any speed from 50 to 3,200 RPM. Cam-lock mechanisms allow adjustments of headstock, tailstock and tool rest base without having to use any tools at all.* Digital readout allows operator to dial in the desired speed for best results* Heavy-duty cast-iron lathe bed adds…

    2 Review(s)
    $2,344.99
  18. Lathe Tool Holder

    Lathe Tool Holder

    …your turning tools within reach! This specially designed holder mounts to most flatbed lathes to keep up to 12 turning tools and other turning supplies at the ready.* 12" diameter tray features six slots for standard size tools and six for miniature tools and spins to make tool selection…

    14 Review(s)
    $27.99 $19.99

    SAVE 29%

  19. Laguna Mini Lathe Banjo Support Bracket

    Laguna Mini Lathe Banjo Support Bracket

    …Bracket is an accessory attachment for the Laguna REVO 10 x 16 Mini Lathe (#48234, sold separately). The bracket bolts onto your lathe to move the tool rest further away from the tail stock, increasing the bowl turning capacity of the REVO from 10" to 16" in diameter. Technical Details:* Solid cast…

    $49.99
  20. Nova 27007 Tool Rest Collar

    Nova 27007 Tool Rest Collar

    …Nova Tool Rest Collar acts as a stop collar for your Nova tool rest. It slides onto the tool rest shank, and maintains a fixed, repeatable height so you don't lose your height adjustment when you angle the rest for different angles of approach. 1" internal diameter fits many common tool rest models.…

    $15.99
  21. Carter Hollow Roller™ Mounting Stud 1125-65

    Carter Hollow Roller™ Mounting Stud 1125-65

    …with a longer 1-1/8" tool rest post. Includes a second lengthened stud for the secondary tool rest. Technical Details:* Adapts your lathe to use the Carter Hollow Roller™ Vessel Turning System* Works with Powermatic 3520 and most lathes with a longer 1-1/8" tool rest post* Includes a second…

    $24.99
  22. Carter Hollow Roller™ Vessel Turning System

    Carter Hollow Roller™ Vessel Turning System

    …General 260, Jet 1236, Jet 1442, Jet 1642, Nova 1500, Nova 3000, Oneway 1224, Oneway 1640 and most lathes with a 1" tool rest post * 47912 - Mounting Stud Works with Delta Midi, Jet Mini 1014, Jet Midi 1220, Nova Mercury, Rikon Mini, and most Mini and Midi lathes with a 5/8" tool rest post

    1 Review(s)
    $358.99
  23. Carter Hollow Roller™ Mounting Stud 1125-45

    Carter Hollow Roller™ Mounting Stud 1125-45

    …lathes with a 1-1/8" tool rest post. Includes a second lengthened stud for the secondary tool rest. Technical Details:* Adapts your lathe to use the Carter Hollow Roller™ Vessel Turning System* Works with Powermatic 45 & 90 lathes and most lathes with a 1-1/8" tool rest post* Includes a second…

    $24.99
  24. Oneway Wolverine Skew Grind Jig

    Oneway Wolverine Skew Grind Jig

    Oneway Skew Grind Jig is a skew grinding attachment for sharpening skew chisels. Attachment holds the skew chisel at a 30° angle to the stone so both sides are sharpened identically. Works with the Oneway Wolverine Grinding Jig (#24707).

    $34.69
  • Items 1 - 24 of 74
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X