Tool Roll

  • Items 1 - 24 of 68
  • Page:
    1. 1
    2. 2
    3. 3
  1. The Toolbox Book

    The Toolbox Book

    …to plan tool storage, select materials, construct, and finish nine types of storage systems.* Chapters include: Tool boxes and the building of a nation; Traditional-style tool chests; A student tool-chest project; Designing in-shop tool storage; Wall cabinets; Standing tool cabinets; Rolling tool

    $24.95
  2. Rockler Pack Rack® Clamp & Tool Storage System

    Rockler Pack Rack® Clamp & Tool Storage System

    …shelf, while four high-quality polyurethane casters let you roll the entire rig anywhere in the shop. The heavy-duty 5/8" diameter steel rods are strong enough to hold a full row of clamps and simultaneously support a shelf filled with tools. The steel rods can be repositioned in 13 mounting holes.…

    60 Review(s)
    $149.99
  3. Pack Rack® Tool Apron

    Pack Rack® Tool Apron

    …x 5" pockets for hand tools* Eighteen 1/2" x 5-1/2" pockets* Five 1/2" x 3" pockets for pencils, nail punches, etc.* One custom combo square pocket* Easy-access slot for your tape measure* Two steel loops for your hammer, drill, or mallet* Small steel loop for hanging rolls of tape* Four reinforced…

    2 Review(s)
    $31.99
  4. Dust-Free Shop Tray, 5''W x 24''L x 3''H

    Dust-Free Shop Tray, 5''W x 24''L x 3''H

    …Since the trays don't sit on your work surface, your benchtop will be free of tools and parts, and dust is free to fall through the bottom of the tray. Ideal for commonly used items, especially items that tend to roll, such as hardware, drill bits, drill drivers and screwdrivers. Technical Details:*…

    $24.99
  5. FlexCut 4-piece Carving Knife Set

    FlexCut 4-piece Carving Knife Set

    …Try your hand at carving withthe cutting knife for roughing out shapes, the detail knife for tight work in areas ofdetail, the pelican knife for rolled, slicing cuts and use in hollow areas, and the minipelican knife for extremely fine detail. Ergonomic solid ash handles are easy on yourhands as you…

    $82.99
  6. Rockler Power Tool Mobile Base Hardware

    Rockler Power Tool Mobile Base Hardware

    …ready-made. Just step on the generously-sized pedal and the mobile base raises the tool onto a single swivel caster. Tripod design allows for easy maneuverability. * Load rating of 600 pounds.* Mobile base raises tool approximately 3/4" off the floor.* 1-1/2" square hardwood stretchers supplied by…

    165 Review(s)
    $62.99
  7. 5/8" Alan Lacer Skew Chisel

    5/8" Alan Lacer Skew Chisel

    …Quality skew chisels made by Hamlet Craft Tools of England!* Small skew chisel is 5/8" wide with 14" handle.* Large skew chisel is 1-3/8" wide and has a 16" handle.* Short point side is rolled completely for improve ease in planing spindle stock and for rolling beads.* Long point side is kept flat,…

    $79.99
  8. 1-3/8" Alan Lacer Skew Chisel

    1-3/8" Alan Lacer Skew Chisel

    …Quality skew chisels made by Hamlet Craft Tools of England!* Small skew chisel is 5/8" wide with 14" handle.* Large skew chisel is 1-3/8" wide and has a 16" handle.* Short point side is rolled completely for improve ease in planing spindle stock and for rolling beads.* Long point side is kept flat,…

    $109.99
  9. Flexcut Craft Carvers Set

    Flexcut Craft Carvers Set

    …instead of a tightly gripped tool. Made in USA. Flexcut 5 Piece Flexcut Travel Kit includes: * Contains quick connect palm handle* 4 interchangeable blades: No. 3 - 3/8" sweep, No. 6 - 5/16" sweep, No. 9 - 1.5mm sweep, and 70° 1/4" V-tool.* The 5 pocket tool roll rolls up into a handy 5" X 2"…

    3 Review(s)
    From: $49.99
  10. Nordfab QF Pipe

    Nordfab QF Pipe

    …construction. All other sizes (ranging from 4" to 6" in diameter) are 22-gauge galvanized steel and have laser welded seams. Every Quick-Fit pipe has rolled ends for fast, tool-free connections with Quick-Fit clamps. Note: One Quick-Fit clamp of appropriate diameter is required for every connection…

    From: $26.79
  11. Tool Box Liner

    Tool Box Liner

    …your tool box. This nonslip liner is solid grade and cushioned to keep tools in place even as you slide tool box drawers in and out, avoiding scratching and marring. Anti corrosive Rust Gard™ coating will inhibit rust and protect your tools for up to five years. Comes in a 22" x 6' roll that…

    1 Review(s)
    $18.99
  12. SawStop Contractor Table Saw Job Site Cart

    SawStop Contractor Table Saw Job Site Cart

    …fully equipped to handle the muddy, rugged conditions present at most any construction site. The sturdy 10" ball bearing wheels make it easy to roll your saw up and down ramps to get into houses and trucks. The stand is constructed of squared steel tubing to withstand the rigors of daily use.…

    $199.00
  13. Dewalt D55684 Heavy-Duty 196cc 6.5 HP, 150 PSI, 10.5 Gallon, PSI Gas Wheeled Portable w/ Roll Cage

    Dewalt D55684 Heavy-Duty 196cc 6.5 HP, 150 PSI, 10.5 Gallon, PSI Gas Wheeled Portable w/ Roll Cage

    Heavy-Duty 196cc (6.5 HP), 150 PSI, 10.5 Gallon, PSI Gas Wheeled Portable w/ Roll Cage * 3 Year Limited Warranty Features & Benefits: * 10.5 Gallon (39.7L) Tank, 150 Max PSI, 10.5 SCFM* Pump delivers the surge air power and recovery needed to run extra nailers over standard 8 gallon (30.2L) (*Tested…

    $1,202.99
  14. Collapsible Rolling Tool Carts - Set of 2

    Collapsible Rolling Tool Carts - Set of 2

    Whether for the occasional household project or everyday shop use, this Collapsible Rolling Tool Cart will save you countless trips back to your workbench to get yet another tool. Simply load up the cart with whatever you need for any given task and wheel it around the shop, the jobsite and even up…

    0 Review(s)
    $59.98
  15. Jet® SBR-30M 3-in-1 Shear, Brake and Roll

    Jet® SBR-30M 3-in-1 Shear, Brake and Roll

    …and slip roll in one compact machine* Right- or left-handed operation* Shear can be used for mild steel, aluminum, brass, copper, lead, plastic and zinc* Brake is equipped with easily removable fingers that permit angle, channel, box and other complex bending operations* Slip rolls are precision…

    $899.00
  16. S-36N Stand for Jet® SR-2236M Benchtop Slip Roll

    S-36N Stand for Jet® SR-2236M Benchtop Slip Roll

    …height for better ergonomics and less fatigue, plus a shelf for added storage and convenience. * Elevates your manual slip roll to a comfortable working height* Approximate dimensions (L x W x H): 44'' x 14'' x 28''* Includes shelf for convenient storage of tools* Sturdy aluminum construction

    $229.00
  17. S-30N Stand for Jet® SBR-30M 3-in-1 Shear, Brake and Roll

    S-30N Stand for Jet® SBR-30M 3-in-1 Shear, Brake and Roll

    …comfort, ergonomics and less fatigue, plus a shelf for added storage and convenience. * Elevates your combination shear, brake and slip roll to a comfortable height* Approximate dimensions (L x W x H): 35'' x 16'' x 28''* Includes shelf for convenient storage of tools* Sturdy aluminum construction

    $159.00
  18. Robert Sorby Multi-Tip Hollowing Tool (RS200KT)

    Robert Sorby Multi-Tip Hollowing Tool (RS200KT)

    The Robert Sorby RS200KT is a multi-purpose turning tool that comes packaged with three replaceable cutters - two for hollowing, one for scraping. Of the two hollowing cutters, the one with the rounded end is designed for general roughing out and will create a flowing curve as in the bottom of a…

    5 Review(s)
    $102.99
  19. Hook & Loop 3" x 10 Yard Abrasive Roll for SAND-FLEE-Non-Stearate Abrasive

    Hook & Loop 3" x 10 Yard Abrasive Roll for SAND-FLEE-Non-Stearate Abrasive

    Ten-yard abrasive rolls with a hook and loop backing for fast and easy application and removal. Stearate coating retards loading, so it is not only easy to remove the paper from your SAND-FLEE, but you can use it over and over again.

    1 Review(s)
    $158.59
  20. Peel-and-Stick Edge Banding   25' Rolls

    Peel-and-Stick Edge Banding 25' Rolls

    …from premium veneers.Features: * PSA (Pressure Sensitive Adhesive) Edge Banding allows you to apply edging without expensive edge banders or other tools.* Wood edgings are made of solid hardwood veneer.* Available in a variety of wood species – some of them difficult to find in edge bandings.

    From: $14.49
  21. Peel-and-Stick Edge Banding   50' Rolls

    Peel-and-Stick Edge Banding 50' Rolls

    …from premium veneers.Features: * PSA (Pressure Sensitive Adhesive) Edge Banding allows you to apply edging without expensive edge banders or other tools.* Wood edgings are made of solid hardwood veneer.* Available in a variety of wood species – some of them difficult to find in edge bandings.

    From: $24.49
  22. Tool Holder for Festool CT 26 E and CT 36 E Dust Extractors

    Tool Holder for Festool CT 26 E and CT 36 E Dust Extractors

    Allows you to work more efficiently by keeping your tool right at hand. No more sanders rolling off the bench! Installs without tools onto the top of CT 26 and CT 36 dust extractors. Holds one tool. Compatible with all Festool sanders and Festool Domino.

    $55.00
  23. Dewalt DW7440RS Heavy-Duty Rolling Table Saw Stand

    Dewalt DW7440RS Heavy-Duty Rolling Table Saw Stand

    Heavy-Duty Rolling Table Saw Stand * 3 Year Limited Warranty* Leightweight design weighs only 33 lbs delivering over 20% less weight to carry than other competitive mobile stands* Heavy-Duty kickstand allows the stand to balance upright for mobility and storage* Quick connect stand brackets attach…

    $169.00
  24. Flexcut® SK760 1/2'' x 60° Soft V-Tool

    Flexcut® SK760 1/2'' x 60° Soft V-Tool

    …as a parting tool for creating lines and textures, and it can be rolled onto its side and used as a straight chisel for flattening. This is an unhandled carving tool, and fits the Flexcut® SK100 Quick Connect Handle (20219, sold separately). Made in USA. * Unhandled carving tools let you save…

    $16.49
  • Items 1 - 24 of 68
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X