Top Bearing Router Bit

  • Items 1 - 24 of 57
  • Page:
    1. 1
    2. 2
    3. 3
  1. Freud® Top Bearing Flush Trim Router Bits - 1/2" Shank

    Freud® Top Bearing Flush Trim Router Bits - 1/2" Shank

    …guide bearings on these router bits make them ideal for grooving, lettering and dadoes, as well as any other template work where the template is mounted on the top face of the workpiece. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as…

    From: $31.97
  2. Freud® Top Bearing Mortising Dado Router Bits - 1/4" Shank

    Freud® Top Bearing Mortising Dado Router Bits - 1/4" Shank

    …on CNC and other automatic routers as well as hand-held and table-mounted portable routers. * Features TiCo™ Hi-Density carbide for longer bit life and a flawless finish.* Perma-SHIELD® Non-stick Coating protects from heat, gumming, and corrosion.* Each bit is computer-balanced and…

    0 Review(s)
    From: $22.47
  3. Freud® Top Bearing Flush Trim Router Bits - 1/4" Shank

    Freud® Top Bearing Flush Trim Router Bits - 1/4" Shank

    …guide bearings on these router bits make them ideal for grooving, lettering and dadoes, as well as any other template work where the template is mounted on the top face of the workpiece. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as…

    From: $22.97
  4. Rockler Pattern Flush Trim Router Bits - 1/2" Shank

    Rockler Pattern Flush Trim Router Bits - 1/2" Shank

    The bearing guides on our Pattern Flush Trim Bits are located on the shank side of the blade, and have the same diameter as the blade, making them the perfect choice for template work when the template is fastened on the top side of the material (if using a hand-held router in the conventional way).…

    1 Review(s)
    From: $27.59
  5. Freud® Top and Bottom Bearing Flush Trim Router Bits

    Freud® Top and Bottom Bearing Flush Trim Router Bits

    Double bearing design allows you to choose the cutting direction that best suits your work piece. Freud's Top & Bottom Bearing Bits let you rout half the curve in one direction, flip the work piece over and rout the other half in the opposite direction without repositioning your pattern. Perfect for…

    From: $34.47
  6. Rockler Flush Door Trimming Router Bit - 3/4" Dia x 2" H x 1/2" Shank

    Rockler Flush Door Trimming Router Bit - 3/4" Dia x 2" H x 1/2" Shank

    …a full 2" of carbide, this bit is ideally suited for trimming thick entry doors, interior doors and countertops. It features a top-mounted guide bearing, which lets you use templates on the top side. This means better visibility when hand-holding the router. The bit is 3/4" in diameter, and features…

    6 Review(s)
    $44.99
  7. Freud® Rounding Over Router Bits - 1/2" Shank

    Freud® Rounding Over Router Bits - 1/2" Shank

    Freud's Rounding Over Router Bits are ideal for softening furniture edges and creating decorative rounded edges. The bit can set to cut a simple radius, or lowered to cut a beaded edge. Freud round over bits cut through all composition materials, plywoods, hardwoods, and softwoods. They feature…

    From: $32.47
  8. Freud® 50-098 Top Bearing Flush Trim Router Bit - 5/16" Dia x 1" H x 1/4" Shank

    Freud® 50-098 Top Bearing Flush Trim Router Bit - 5/16" Dia x 1" H x 1/4" Shank

    …guide bearing on this router bit makes it ideal for grooving, lettering and dadoes, as well as any other template work where the template is mounted on the top face of the workpiece. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well…

    $27.97
  9. Rockler Large Trim for 2" Thick Doors Router Bit - 1" Dia x 2" H x 1/2" Shank

    Rockler Large Trim for 2" Thick Doors Router Bit - 1" Dia x 2" H x 1/2" Shank

    …and balancing a large panel on top of a jointer. Instead, you bring the tool to the material. The kit includes one carbide router bit and five bearings to set up the various depths of cut. The bit can also be used as a double-bearing flush trim bit, as two bearings are included for that purpose.…

    5 Review(s)
    $89.99
  10. Freud® Bearing Flush Trim Router Bits - 1/2" Shank

    Freud® Bearing Flush Trim Router Bits - 1/2" Shank

    Trimming laminate counter tops and doing intricate pattern work with templates is a breeze with this flush trim bit from Freud. With two flutes to provide fast chip clearance, and razor sharp carbide for smooth, burn-free cuts, these bits will turn out top-quality edges time after time.* Cuts all…

    From: $18.97
  11. Rockler Small Trim for 1" Thick Doors Router Bit - 3/4" Dia x 1" H x 1/2" Shank

    Rockler Small Trim for 1" Thick Doors Router Bit - 3/4" Dia x 1" H x 1/2" Shank

    …and balancing a large panel on top of a jointer. Instead, you bring the tool to the material. The kit includes one carbide router bit and five bearings to set up the various depths of cut. The bit can also be used as a double-bearing flush trim bit, as two bearings are included for that purpose.…

    5 Review(s)
    $49.99
  12. Freud® Rabbeting Router Bits - 1/2" Shank

    Freud® Rabbeting Router Bits - 1/2" Shank

    These bits include a set of bearings, which are installed to achieve a range of rabbet depths. Use them for joinery applications, such as for letting in back panels and the tops and bottoms of cabinets. The bits feature high-grade carbide, which produces super smooth cuts on both surfaces of the…

    2 Review(s)
    From: $42.47
  13. Rockler Handrail Router Bit - 1-1/4" Dia x 1-1/2" H x 1/2" Shank

    Rockler Handrail Router Bit - 1-1/4" Dia x 1-1/2" H x 1/2" Shank

    …handrail, and this bit will ensure that it's as comfortable as it is beautiful. Combined with another profile for the top of the rail, you'll have an easy custom railing in the material of your choice. See 34525 for an ideal profile for the top of the rail.* Two flutes.* 5/8" ball bearing guide.

    $69.99
  14. Incra Master Lift II Designed for Rockler Tables

    Incra Master Lift II Designed for Rockler Tables

    …fit* Includes five steel reducing rings - 3/8", 1", 1-5/8", 2-5/8", 3-5/8"* Change router bits from the top of the table* Quickly make super precise, 0.001" height adjustments from above* Exclusive ball bearing mechanism for super smooth action and low friction* Ultra-responsive, direct drive 16TPI…

    6 Review(s)
    $329.99
  15. CNC Shark HD Version 2.0 Routing System

    CNC Shark HD Version 2.0 Routing System

    …Also includes: 3/8" dia. V-groove Bit and two hold-down clamps!* Mount for Router included (Router sold separately).* Z travel up to 7 inches max (2 inches more the regular plus).* X and Y axis have supported linear guides.* Bearings: precision linear bearing guides for maximum rigidity.* Precision…

    3 Review(s)
    $3999.99
  16. Rockler 3 Wing Slotting Cutters Router Bits - 1/2" Shank

    Rockler 3 Wing Slotting Cutters Router Bits - 1/2" Shank

    …a 22mm bearing set to cut 1/2" deep into the edge of your material. With the slot width of your choice, you can create slots and grooves for frame and panel doors, picture frames, glass retainer and more. The 3-wing design provides a smooth cut and a longer cutting life. Top quality bits that meet…

    14 Review(s)
    $36.99
  17. Rockler Ogee Base Molding Router Bit - 1-7/8" Dia x 3/4" H x 1/2" Shank

    Rockler Ogee Base Molding Router Bit - 1-7/8" Dia x 3/4" H x 1/2" Shank

    …Designed especially for base molding, this carbide-tipped router bit also works well for edge-shaping tabletops, box and trunk tops, picture frames, and more. The classic Roman ogee profile softens the field while maintaining sharp definition at the corners. Two flute, 1/2" Ball bearing guide.

    $59.99
  18. Rockler Double Bearing Shear Flush Trim Router Bit - 3/4" Dia x 1-1/2" H x 1/2" Shank

    Rockler Double Bearing Shear Flush Trim Router Bit - 3/4" Dia x 1-1/2" H x 1/2" Shank

    …on these bits slice through stock at a slight angle, producing a smoother cut than traditional straight-fluted bits. The unique design also helps eliminate tear-out problems that occur when routing end-grain, cross-grain and figured grain on hardwoods. Dual bearings mounted at both top and bottom…

    13 Review(s)
    $42.99
  19. Freud® 99-764 Bevel Rail and Stile Router Bit Set - 1-11/16" Dia x 1-1/4" H x 1/2" Shank

    Freud® 99-764 Bevel Rail and Stile Router Bit Set - 1-11/16" Dia x 1-1/4" H x 1/2" Shank

    Mill tenons of any length! Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for any door 5/8" to 1-1/4" thick. Unique cutter geometry virtually…

    $127.47
  20. Freud® 97-154 3-Pc. Door Router Bit Set - 5/8" H x 1/2" Shank

    Freud® 97-154 3-Pc. Door Router Bit Set - 5/8" H x 1/2" Shank

    …Adjustable Quarter Round Rail and Stile Bits to mill tenons of any length! Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for any door 5/8" to 1-1/4"…

    3 Review(s)
    $183.47
  21. Freud® 97-252 3-Pc. Door Router Bit Set - 5/8" H x 1/2" Shank

    Freud® 97-252 3-Pc. Door Router Bit Set - 5/8" H x 1/2" Shank

    …Adjustable Ogee Rail and Stile Bits, capable of milling tenons of any length! Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for any door 5/8" to…

    2 Review(s)
    $183.47
  22. Freud® 99-267 2-pc. Entry & Interior Router Bit Set - 1-7/8" Dia x 1-7/8" H x 1/2" Shank

    Freud® 99-267 2-pc. Entry & Interior Router Bit Set - 1-7/8" Dia x 1-7/8" H x 1/2" Shank

    …the spacers. You can also mill a tenon of virtually any length! To do so, the top cutter and bearing of the rail bit is simply unscrewed from the lower cutter and shank. No need to remove the bit from the router or change the height of the cutter!* Mills perfect rail and stile joints for 1-3/4"…

    1 Review(s)
    $199.97
  23. Freud® 99-760 Premier Adjustable Rail and Stile Router Bit Set - 1-11/16" Dia x 1-1/4" H x 1/2" Shank

    Freud® 99-760 Premier Adjustable Rail and Stile Router Bit Set - 1-11/16" Dia x 1-1/4" H x 1/2" Shank

    …remove the top portion of the cutter (including bearing and spindle). High-density carbide composition and Perma-Shield coating lengthen bit life and protect against heat and pitch buildup. 1/2" shanks.* Create extended tenons for extra door joint strength (patented solution) - Top portion of…

    4 Review(s)
    $127.47
  24. Freud® Bearing Flush Trim Router Bits - 1/4" Shank

    Freud® Bearing Flush Trim Router Bits - 1/4" Shank

    These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers. Application: Trimming laminate counter tops and doing…

    From: $16.97
  • Items 1 - 24 of 57
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X