Tormek Accessories

  • Items 1 - 24 of 36
  • Page:
    1. 1
    2. 2
  1. Stone Grader SP-650 for Tormek T-7 Sharpening System

    Stone Grader SP-650 for Tormek T-7 Sharpening System

    The Tormek Grindstone is constructed so that with the Stone Grader it can be treated to change its property from fast grinding to fine grinding, i.e. sharpening. This has obvious advantages. You can make both the first fast grinding and the sharpening on the same grindstone and the same grinding…

    1 Review(s)
    $29.00
  2. Horizontal Base for Universal Support (XB-100) - Tormek Sharpening System

    Horizontal Base for Universal Support (XB-100) - Tormek Sharpening System

    Lets you move the Universal Support on Tormek Sharpening Systems from the vertical position (with the wheel turning into the edge being sharpened) to the horizontal position (for grinding away from the edge).

    $27.00
  3. Universal Support with Micro Adjust Upgrade (for Older Models) (US-105)

    Universal Support with Micro Adjust Upgrade (for Older Models) (US-105)

    The versatile Universal Support is the basis of the Tormek system, and this upgrade for older models incorporates a micro adjust feature for exact and fast fine setting. It is made of 12mm (approx. 1/2") round steel and has a double mounting for maximum stability. The Universal Support can be placed…

    $45.00
  4. Scissors Jig SVX-150 for Tormek T-7 Sharpening System

    Scissors Jig SVX-150 for Tormek T-7 Sharpening System

    …the scissors' thickness with the screw. You lock the scissors by tightening the knob. The support plate has a sliding surface, so the holder with the scissors can easily be moved while it is pressed onto the plate. Best Used With: 35254 -Tormek T-7 Sharpening System Click Here to View Instructions:

    $54.00
  5. Tormek Square Edge Jig SE-76

    Tormek Square Edge Jig SE-76

    …Details:* Mounts on Tormek's universal support* Automatically lines up chisels and plane irons for correct grinding angle* Lower clamp has a ridge to fit shorter tools* Two safety stops prevent tools from slipping off stone Best Used With: 35254 - Tormek T-7 33377 - Tormek T-3 Click Here to View…

    2 Review(s)
    $60.00
  6. Tormek AngleMaster WM-200

    Tormek AngleMaster WM-200

    Set and measure edge angles quickly and easily for accurate knife and tool sharpening with the Tormek AngleMaster WM-200! Works easily in two ways: use it to set a jig to a grindstone so it grinds your tool at any desired edge angle from 10° to 75°, or use it to measure an existing edge…

    $27.00
  7. Work Sharp™ WS3000 Tool Bar Attachment

    Work Sharp™ WS3000 Tool Bar Attachment

    …top and underside of your grinding wheel with the Tormke® Work Sharp™ WS3000 Tool Bar Attachment! Designed to accept a wide range of Tormek® or Jet® sharpening jigs (Sold Separately) for turning tools and carving tools. Fits all WS3000 tools, installs quickly and doesn't interfere…

    $49.99
  8. T-7 Advanced Water Trough, AWT-250

    T-7 Advanced Water Trough, AWT-250

    Tired of a constant river of water dripping from your grinder onto your bench and floor below? Outfit your Tormek T-7, Tormek 2000, or older models with a 10" stone with the Tormek Advanced Water Trough and eliminate the mess!* Features an enlarged standard lip ensuring your workbench stays free…

    $28.00
  9. Replacement Super Grindstone 250 x 50 mm, (SG-250)

    Replacement Super Grindstone 250 x 50 mm, (SG-250)

    Help your Tormek T-7 Sharpening System (35254, sold separately) keep producing a keen edge with this replacement Super Grindstone. Normal 220-grit surface can be graded up to function like a 1000-grit stone.

    $184.00
  10. Tormek Honing Compound (PA-70) (Tube)

    Tormek Honing Compound (PA-70) (Tube)

    Use with the leather honing wheels on Tormek Sharpening Systems to remove the burr of a sharpened tool and polish the edge to a mirror finish. Grain size 3 micron (average). Approximately 2.5 oz.

    $10.00
  11. Handtool Kit for Tormek Sharpening Systems HTK-705

    Handtool Kit for Tormek Sharpening Systems HTK-705

    …tools. Each jig perfectly replicates the edge angle so you can sharpen hand tools faster than ever. This kit works with both the T-7 and T-3 Tormek Sharpening Systems. Technical Details:* The Knife Jig works to sharpen most knives, including carver's draw knives. Long knives need to be stiff,…

    1 Review(s)
    $215.00
  12. Tormek Woodturner's Accessory Kit TNT-708

    Tormek Woodturner's Accessory Kit TNT-708

    Shape and sharpen all your turning tools with this Tormek Woodturner's Accessory Kit (TNT-708)! You get Gouge Jig (SVD-185) for fingernail shaped bowl gouges and spindle gouges, a Tool Rest (SVD-110) for scrapers, hollowing tools, and thin parting tools, a Turning Tool Setter (TTS-100T) with…

    1 Review(s)
    $334.00
  13. Diamond Stone Truing Tool TT-50 for Tormek T-7 Sharpening System

    Diamond Stone Truing Tool TT-50 for Tormek T-7 Sharpening System

    Trues the stone to perfect roundness and an exact, flat grinding surface. Works with Tormek T-7 Sharpening System. Click Here to View Instructions:

    $89.00
  14. Tormek Japanese Waterstone SJ-250

    Tormek Japanese Waterstone SJ-250

    Bring the ultimate fine surface finish to carving tools, knives, scissors, plane irons and more with virtually no visible surface marks. No further honing is necessary. Compatible with Tormek T-7 models. Technical Details* 4000 grit* 250mm Best Used With: Tormek T-7 Sharpening System

    $386.00
  15. Profiled Leather Wheel LA-120 for Tormek T-7 Sharpening Systems

    Profiled Leather Wheel LA-120 for Tormek T-7 Sharpening Systems

    Designed specifically for the Tormek T-7 Sharpening System, this wheel has exchangeable leather discs so you can easily replace a disc with a worn tip. The two standard discs have a radius of 3 mm (1/8") and a 60° tip. Removes the burr and polishes the inside on turning and carving gouges and…

    1 Review(s)
    $64.00
  16. Multi-Jig SVS-50 for Tormek T-7 Sharpening System

    Multi-Jig SVS-50 for Tormek T-7 Sharpening System

    Use the Multi-Jig SVS-50 Sharpening System Jig with your Tormek T-7 or T-3 to sharpen turning skew chisels, straight or radiused edge parting and beading tools and roughing gouges. Straight carving gouges up to 2" width. Technical Details:* For turning skew chisels, straight or radiused edge parting…

    $68.00
  17. Tormek® Sharpening System with Handtool Kit

    Tormek® Sharpening System with Handtool Kit

    We're pairing the Tormek T-7 Sharpening System with the Tormek Handtool Kit to save you money and give you enhanced accuracy, convenience and versatility! With the T-7's new Square Edge Jig, your blades will automatically be squared to the grinding wheel without the need for picky adjustments. Since…

    $849.00
  18. Tormek DBS-22 Drill Bit Sharpening Attachment

    Tormek DBS-22 Drill Bit Sharpening Attachment

    …specialists at Tormek know how to keep a cutting edge. Accepts drill bits from 1/8" to 7/8". Technical Details:* Accepts Drill bits from 1/8" to 7/8" with point angles from 90 deg to 150 deg* Clearance angle can be set to 7 deg, 9 deg, 11 deg or 14 deg Best Used With: Tormek T-7 and T-3 Models.

    1 Review(s)
    $280.00
  19. Tormek® Small Knife Sharpening Jig

    Tormek® Small Knife Sharpening Jig

    …without damaging the handle.* The Tormek® Small Knife Sharpening Jig consists of a guide bar, a handle grip, and an adjustable clamp. The knife handle is fastened with a knob on the adjustable clamp.* The guide bar mounts in the jaws of the Tormek Knife Jig SVM-45 (60533, sold separately).*…

    $33.00
  20. Tormek Blackstone Silicon Stone SB-250

    Tormek Blackstone Silicon Stone SB-250

    For use with Tormek sharpener where more agressive metal removal is necessary. Perfect for HSS turning tools. Compatible with Tormek T-7 models.

    $210.00
  21. Tormek T-7 Sharpening System

    Tormek T-7 Sharpening System

    Tormek's new T-7 pairs an already widely acclaimed sharpening system with two new innovations for enhanced accuracy, convenience and versatility. With the new Square Edge Jig, your blades will be automatically squared to the grinding wheel without the need for picky adjustments. Since chisels and…

    8 Review(s)
    $665.00
  22. Tormek Bench Grinder Mounting Set

    Tormek Bench Grinder Mounting Set

    …a Tormek Sharpening System or your Bench Mount Grinder* The principle for setting the shape and edge angle is the same regardless of which machine you use OPTIONAL ACCESSORIES :* 18772 - Universal Gouge Jig (SVD-185)* 60483 - Tool Rest (SVD-110)* 37592 - Multi-Jig (SVS-50)* 24201 - Tormek Turning…

    $66.00
  23. Tool Rest SVD-110 for Tormek T-7 Sharpening System

    Tool Rest SVD-110 for Tormek T-7 Sharpening System

    …permits a safe and steady positioning of the tool towards the stone. The bore is made with a special wedge shape, which increases the locking force by 250 %. You can lock the Tool Rest instantly at the chosen angle. Best Used With: 35254 -Tormek T-7 Sharpening System Click Here to View Instructions:

    $38.00
  24. Long Knife Jig SVM-140 for Tormek T-7 Sharpening System

    Long Knife Jig SVM-140 for Tormek T-7 Sharpening System

    …towards the edge. The jig comprises an adjustable clamp for holding knives of any thickness and an adjustable stop. You adjust the jig to the knife thickness with the screw. You lock the tool by tightening the knob. Best Used With: 35254 -Tormek T-7 Sharpening System Click Here to View Instructions:

    $56.00
  • Items 1 - 24 of 36
  • Page:
    1. 1
    2. 2
Feedback X