Tormek Universal Support

  • Grid List
  • Page:
    1. 1
  • Items 1 - 13 of 13
  • Page:
    1. 1
  • Products (13)
  1. Tormek Bench Grinder Mounting Set

    Tormek Bench Grinder Mounting Set

    …to fit your grinder. Universal support with micro-adjust, mounting base, eight mounting screws, eight washers and four rubber feet included. Technical Details:* Allows you to use your bench grinder for shaping with the Tormek sharpening system* Allows you to use Tormek jigs with your bench grinder*…

    $66.00
  2. Horizontal Base for Universal Support (XB-100) - Tormek Sharpening System

    Horizontal Base for Universal Support (XB-100) - Tormek Sharpening System

    Lets you move the Universal Support on Tormek Sharpening Systems from the vertical position (with the wheel turning into the edge being sharpened) to the horizontal position (for grinding away from the edge).

    $27.00
  3. Tormek® Small Knife Sharpening Jig

    Tormek® Small Knife Sharpening Jig

    …bar mounts in the jaws of the Tormek Knife Jig SVM-45 (60533, sold separately).* Once installed, you sharpen using the same technique as for the knife jig.* The exact edge angle is set by turning the adjustable stop or using the micro-adjust on the universal support.* Patent pending.* Note: Some…

    $33.00
  4. Universal Support with Micro Adjust Upgrade (for Older Models) (US-105)

    Universal Support with Micro Adjust Upgrade (for Older Models) (US-105)

    The versatile Universal Support is the basis of the Tormek system, and this upgrade for older models incorporates a micro adjust feature for exact and fast fine setting. It is made of 12mm (approx. 1/2") round steel and has a double mounting for maximum stability. The Universal Support can be placed…

    $45.00
  5. Tormek T-7 Sharpening System

    Tormek T-7 Sharpening System

    …feed: Trues the grindstone exactly round and flat. Guided by the Universal Support, which also guides the jigs. Dual knobs for smooth feed across the stone.* Stainless steel hardware: Prevents rust and wear on bearings.* Universal Support with acme thread: Round section without flat machining makes…

    8 Review(s)
    $665.00
  6. Tormek Square Edge Jig SE-76

    Tormek Square Edge Jig SE-76

    …Details:* Mounts on Tormek's universal support* Automatically lines up chisels and plane irons for correct grinding angle* Lower clamp has a ridge to fit shorter tools* Two safety stops prevent tools from slipping off stone Best Used With: 35254 - Tormek T-7 33377 - Tormek T-3 Click Here to View…

    2 Review(s)
    $60.00
  7. Long Knife Jig SVM-140 for Tormek T-7 Sharpening System

    Long Knife Jig SVM-140 for Tormek T-7 Sharpening System

    Universal Support is placed vertically for grinding towards the edge. The jig comprises an adjustable clamp for holding knives of any thickness and an adjustable stop. You adjust the jig to the knife thickness with the screw. You lock the tool by tightening the knob. Best Used With: 35254 -Tormek

    $56.00
  8. Axe Grinding Jig SVA-170 for Tormek T-7 Sharpening System

    Axe Grinding Jig SVA-170 for Tormek T-7 Sharpening System

    …comprises a clamp with a rubber lined, wedge shaped stop, which holds the axe in a fixed position towards the grindstone. The clamp works on the Universal Support, on which it slides across the stone. The jig is designed so that the rotation of the stone presses the axe firmly into the jig. You only…

    $19.00
  9. Short Tool Jig SVS-32 for Tormek T-7 Sharpening System

    Short Tool Jig SVS-32 for Tormek T-7 Sharpening System

    …developed for short woodcarving tools, butt chisels and tools for power carvers. The jig has two parallel flanges running on both sides of the Universal Support. Max tool width 1-1/4". The technique achieved with this design ensures that at all times the jig - even when rotated - holds the tool…

    $28.00
  10. Tormek T-7 40th Anniversary Limited Edition Sharpening System

    Tormek T-7 40th Anniversary Limited Edition Sharpening System

    Tormek anniversary ballcap!* Square Edge Jig accepts blades up to 76mm or 3" in width.* Square Edge Jig features safety stops, which prevent the tool from slipping offthe stone.* Truing and Dressing Tool with screw feed: Trues the grindstone exactly roundand flat. Guided by the Universal Support,

    $639.00
  11. Tormek® Ultimate Bundle

    Tormek® Ultimate Bundle

    …feed: Trues the grindstone exactly round and flat. Guided by the Universal Support, which also guides the jigs. Dual knobs for smooth feed across the stone* Stainless steel hardware: Prevents rust and wear on bearings* Universal Support with acme thread: Round section without flat machining makes it…

    $1,315.00
  12. Tormek® Magnum Bundle

    Tormek® Magnum Bundle

    …feed: Trues the grindstone exactly round and flat. Guided by the Universal Support, which also guides the jigs. Dual knobs for smooth feed across the stone* Stainless steel hardware: Prevents rust and wear on bearings* Universal Support with acme thread: Round section without flat machining makes it…

    $1,149.00
  13. Tormek® Sharpening System with Handtool Kit

    Tormek® Sharpening System with Handtool Kit

    …feed: Trues the grindstone exactly round and flat. Guided by the Universal Support, which also guides the jigs. Dual knobs for smooth feed across the stone* Stainless steel hardware: Prevents rust and wear on bearings* Universal Support with acme thread: Round section without flat machining makes it…

    $849.00
  • Grid List
  • Page:
    1. 1
  • Items 1 - 13 of 13
  • Page:
    1. 1
Feedback X