Ts 55 Blades

  • Grid List
  • Page:
    1. 1
  • Items 1 - 12 of 12
  • Page:
    1. 1
  1. Festool TS 55 Universal Circular Saw Blade (495376)

    Festool TS 55 Universal Circular Saw Blade (495376)

    …Purpose blade for the TS 55 Plunge Cut Saw is a clean-cutting general purpose blade for wood and soft plastics, and serves as a fine-rip cutting blade for glue-ready joints.This blade incorporates an offset tooth design known as ATB (Alternating Top Bevel), allowing the blade to cut alternately…

    $52.00
  2. Festool Parallel Guide Extensions 495718

    Festool Parallel Guide Extensions 495718

    …Technical Details:* Festool Parallel Guide Extensions allow you to make narrow, repetitive rip cuts ranging from 1/16" to 7-11/16" (1mm to 195mm).* Easy tool-free attachment to the standard Parallel Guide System.* Rugged metal construction.* U-shaped brackets allow clearance for the saw blade.

    $150.00
  3. Saw Blade Panther, ATF 55 (495372)

    Saw Blade Panther, ATF 55 (495372)

    …Panther Ripping blade for the TS 55 Plunge Cut Saw is an excellent fast-cutting rip blade with an aggressive hook angle and deep gullets for use with both hard and soft woods. This blade incorporates an offset tooth design known as ATB (Alternating Top Bevel), allowing the blade to cut alternately…

    $45.00
  4. Festool Aluminum/Plastic Cutting Blade for TS 55

    Festool Aluminum/Plastic Cutting Blade for TS 55

    …Cutting blade for the TS 55 Plunge Cut Saw is designed to cut non-ferrous materials, especially aluminum; also useful for acrylics and hard plastics. This blade incorporates a TC (Triple Chip), or trapezoidal flat tooth saw blade design, wherein the edges of alternating blade teeth are…

    0 Review(s)
    $94.00
  5. Festool TS 55 Fine Tooth Circular Saw Blade

    Festool TS 55 Fine Tooth Circular Saw Blade

    Tungsten-Carbide, ATB saw blade for fine cross cuts in sheet goods, melamine, hard and soft woods. 48 teeth.

    $73.00
  6. Freud® LU79R Thin Kerf Ultimate Plywood & Melamine Saw Blades

    Freud® LU79R Thin Kerf Ultimate Plywood & Melamine Saw Blades

    …these thin kerf blades the ultimate finish blades. The result is a cut so smooth it eliminates the need for a stabilizer or a scoring blade! The Perma-SHIELD® coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD® blades resist binding in…

    5 Review(s)
    From: $52.47
  7. Waste Side Splinterguard for Festool TS 55 REQ, 5-Pack

    Waste Side Splinterguard for Festool TS 55 REQ, 5-Pack

    …of five. * Use with the Festool TS 55 REQ (45959, sold separately).* When used with a Festool Guide Rail, the guard allows you to achieve splinter-free cuts on both sides of the blade.* For best results, replace splinterguard when changing blade kerf sizes.* Not compatible with TS 55 EQ or TS 75 EQ.

    $20.00
  8. Cover Plate

    Cover Plate

    Cover Plate enhances dust extraction for the TS 55 Plunge Cut Saw by enclosing blade housing.

    $57.00
  9. Parallel Guide for Festool TS 55 Circular Saw

    Parallel Guide for Festool TS 55 Circular Saw

    …enables guided, parallel cutting with the TS 55 Plunge Cut Saw. Can be used for parallel rip cutting with the TS saw, independent of the FS guide rails. Attaches to both sides of the saw for short side or broad side cuts. Rip capacity from the blade side up to 11 13/16in (300mm), and on the motor…

    $62.00
  10. Festool TS 55 REQ Plunge Cut Saw with 55" Guide Rail (561556)

    Festool TS 55 REQ Plunge Cut Saw with 55" Guide Rail (561556)

    …not least, the riving knife has been re-engineered to enter the workpiece before the blade. This allows you to continue long cuts by locating the riving knife in the initial kerf as a reference. The Festool TS 55 REQ is not your standard circular saw. With its accuracy and versatility, a better…

    1 Review(s)
    $615.00
  11. Festool TS 75 EQ Plunge Cut Saw with New T-Loc Systainer

    Festool TS 75 EQ Plunge Cut Saw with New T-Loc Systainer

    …and greater cutting depth than the smaller TS 55, plus added safety features. Designed to work with Festool's revolutionary zero-clearance guide rail, it provides perfectly straight cuts with zero splintering on either face of the stock. The saw blade retracts into the housing, which makes cuts…

    $725.00
  12. Splinterguards for Festool Plunge Cut Saws

    Splinterguards for Festool Plunge Cut Saws

    …on both sides of the blade by using the off-cut side splinterguard in conjunction with the integrated guide rail splinterguard. For best results, replace Splinterguard when switching between different kerf blades. Splinterguards attach easily to both the TS 55 and TS 75 Plunge Cut Saws. Includes…

    $21.00
  • Grid List
  • Page:
    1. 1
  • Items 1 - 12 of 12
  • Page:
    1. 1
Feedback X