Turning With Carbide

  • Items 1 - 24 of 43
  • Page:
    1. 1
    2. 2
  1. Turning Wood with Carbide Tools, Book

    Turning Wood with Carbide Tools, Book

    With the recent introduction of replaceable carbide cutting tips, turning tools have a taken a quantum leap forward. Carbide-tipped turning tools are safer, faster, easier and more efficient than traditional tools, which must be ground and reground to one of dozens of nonstandard profiles. But how…

    $21.95
  2. Round Carbide Mini Turning Tool

    Round Carbide Mini Turning Tool

    …handles feature molded rubber for a secure, effortless grip and excellent ergonomics. Also Available from Rockler:* Diamond Carbide Mini Turning Tool* Square Carbide Mini Turning Tool* Carbide Mini Turning Tool 3-Piece Set Note: carbide cutters are not interchangeable between the different tools.

    1 Review(s)
    $69.99
  3. Square Carbide Mini Turning Tool

    Square Carbide Mini Turning Tool

    …coated with a soft, grippy rubber for a secure, effortless grip and excellent ergonomics.* Note: carbide cutters are not interchangeable between the different tools. Also Available from Rockler:* Round Carbide Mini Turning Tool* Diamond Carbide Mini Turning Tool* Carbide Mini Turning Tool 3-Piece…

    1 Review(s)
    $69.99
  4. Diamond Carbide Mini Turning Tool

    Diamond Carbide Mini Turning Tool

    …feature a molded rubber end for a secure, effortless grip and excellent ergonomics.* Note: carbide cutters are not interchangeable between the different tools. Also Available from Rockler:* Round Carbide Mini Turning Tool* Square Carbide Mini Turning Tool* Carbide Mini Turning Tool 3-Piece Set

    $69.99
  5. Round Carbide Turning Tool Replacement Cutter -R1

    Round Carbide Turning Tool Replacement Cutter -R1

    This solid carbide cutter was sharpened on a diamond wheel to 1500 grit, and can be rotated to give you a fresh edge in only seconds! Use it with the Round Carbide Mini Turning Tool or the Round Carbide Pen Turning Tool (both sold separately) to get smooth finishes on concave surfaces! Technical…

    $17.99
  6. Carbide Mini Turning Tool 3-Piece Set

    Carbide Mini Turning Tool 3-Piece Set

    …sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutting edges stay sharper, longer when compared to steel. The handles are turned from fine, solid ash, and are ergonomic with molded rubber that enhances…

    6 Review(s)
    $189.99
  7. Replacement Carbide Cutter for 41501 Turning Tool

    Replacement Carbide Cutter for 41501 Turning Tool

    Replacement cutter for Carbide Roughing Tool (41501, sold separately). Razor-sharp carbide cutter with 360° cutting surface gives you a smooth finish on most materials.

    $21.99
  8. Square Radius Carbide Mini Turning Tool

    Square Radius Carbide Mini Turning Tool

    This Square Radius Carbide Mini Turning Tool from Rockler features a subtle 2'' radius that works perfectly for smoothing cuts. Additionally, the replaceable, rotatable cutter eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it…

    $69.99
  9. Full Size Round Ergonomic Carbide Turning Tool

    Full Size Round Ergonomic Carbide Turning Tool

    …diameter.* Total overall length of Full Size Carbide Turning Tool is approximately 19-1/2''.* Handles are 13'' long from the butt of the handle to the top of the stainless steel ferrule.* Length of the shaft is approximately 6-1/2''.* Ash handles are coated with a soft, grippy rubber for a secure,…

    $99.99
  10. Full Size Square Ergonomic Carbide Turning Tool

    Full Size Square Ergonomic Carbide Turning Tool

    …square.* Total overall length of Full Size Carbide Turning Tool is approximately 19-1/2".* Handles are 13" long from the butt of the handle to the top of the stainless steel ferrule.* Length of the shaft is approximately 6-1/2".* Ash handles are coated with a soft, grippy rubber for a secure,…

    $99.99
  11. Full Size Square Radius Carbide Turning Tool

    Full Size Square Radius Carbide Turning Tool

    …square with a 2'' convex radius on all 4 edges.* Total overall length of Full Size Carbide Turning Tool is approximately 19-1/2''.* Handles are 13'' long from the butt of the handle to the top of the stainless steel ferrule.* Length of the shaft is approximately 6-1/2''.* Ash handles are coated with

    $99.99
  12. Full Size Diamond Ergonomic Carbide Turning Tool

    Full Size Diamond Ergonomic Carbide Turning Tool

    …wide.* Total overall length of Full Size Carbide Turning Tool is approximately 19-1/2".* Handles are 13" long from the butt of the handle to the top of the stainless steel ferrule.* Length of the shaft is approximately 6-1/2".* Ash handles are coated with a soft, grippy rubber for a secure,…

    $99.99
  13. Carbide Pen Turning Tool 3-Piece Set

    Carbide Pen Turning Tool 3-Piece Set

    …perfect size for turning pens, bottle stoppers and other small items. Carbide cutters can be easily rotated to expose a fresh edge. The set includes one high speed steel 1/8" parting tool, and two tools with replaceable carbide cutters: a 1/2" round cutter and a 1/2" square cutter with a 2" radius…

    1 Review(s)
    $129.99
  14. Diamond Carbide Turning Tool Replacement Cutter - D1

    Diamond Carbide Turning Tool Replacement Cutter - D1

    This solid carbide cutter was sharpened on a diamond wheel to 1500 grit, and can be rotated to give you a fresh edge in only seconds! Use it with the Diamond Carbide Mini Turning Tool or the Diamond Carbide Pen Turning Tool (both sold separately) to get smooth finishes in detailed areas, such as…

    $17.99
  15. Square Carbide Pen Turning Tool Replacement Cutter - Sr1

    Square Carbide Pen Turning Tool Replacement Cutter - Sr1

    …finishing cuts.* Solid carbide for a long life.* Measures 1/2" x 1/2".* Factory sharpened—ready for use right out of the box.* Note: this carbide cutter is not compatible with a standard square turning tool. Use it with the handle included with the 3-Piece Carbide Pen Turning Tool Set (47600,…

    $19.99
  16. Square Carbide Mini Turning Tool Replacement Cutter - S1

    Square Carbide Mini Turning Tool Replacement Cutter - S1

    This solid carbide cutter was sharpened on a diamond wheel to 1500 grit, and can be rotated to give you a fresh edge in only seconds! Use it with the Square Carbide Mini Turning Tool (sold separately) for flat or convex areas on spindles and pen turnings. Technical Details:* Ideal for giving you a…

    $17.99
  17. Carbide Roughing Tool

    Carbide Roughing Tool

    …rotate the 360° carbide cutter when the old surface wears out.* Gives you a smooth finish on most materials* 16" solid hardwood handle gives you greater control and stability.* Ergonomically - correct 16" solid hardwood handle and brass ferrule* Razor-sharp carbide cutter with 360° cutting…

    16 Review(s)
    $65.99 $24.99

    SAVE 62%

  18. Olivewood Turning Blanks-Optional Sizes

    Olivewood Turning Blanks-Optional Sizes

    …Nutty brown with veins of rich green and dark brown. Acquires a rich patina with exposure to UV rays.* Sapwood: Creamy golden color, interlaced with darker stripes.* Texture: Fine, with closed pores.* Working Characteristics: Routs and planes well with carbide cutters. Turns and carves beautifully.…

    5 Review(s)
    From: $3.49
  19. Full Size Square Radius Carbide Replacement Cutter - Sr2

    Full Size Square Radius Carbide Replacement Cutter - Sr2

    …0.60'' square with a 2'' convex radius on all 4 edges. * Solid carbide for a long life. * Factory sharpened - ready for use right out of the box. * Note: This cutter is not compatible with a standard square turning tool. Use it with the Full Size Square Radius Carbide Turning Tool only (48535,…

    $19.99
  20. Full Size Round Carbide Replacement Cutter - R2

    Full Size Round Carbide Replacement Cutter - R2

    This solid carbide cutter was sharpened on a diamond wheel to 1500 grit, and can be rotated to give you a fresh edge in only seconds! Use it with the Full Size Round Carbide Turning Tool (48723, sold separately) to get smooth finishes on curved, concave surfaces. Features:* R2 replacement cutter…

    $19.99
  21. Full Size Diamond Carbide Replacement Cutter - D2

    Full Size Diamond Carbide Replacement Cutter - D2

    …solid carbide cutter was sharpened on a diamond wheel to 1500 grit, and can be rotated to give you a fresh edge in only seconds! Use it with the Full Size Diamond Carbide Turning Tool (49632, sold separately) to get smooth finishes in detailed areas, such as those in spindle turnings! Features:*…

    $19.99
  22. Full Size Square Carbide Replacement Cutter - S2

    Full Size Square Carbide Replacement Cutter - S2

    This solid carbide cutter was sharpened on a diamond wheel to 1500 grit, and can be rotated to give you a fresh edge in only seconds! Use it with the Full Size Square Carbide Turning Tool (49318, sold separately) to smooth flat or convex surfaces. Features:* S2 replacement cutter measures…

    $19.99
  23. Tungsten Carbide Cutters for Robert Sorby TurnMaster System

    Tungsten Carbide Cutters for Robert Sorby TurnMaster System

    …Tungsten Carbide, High Speed Steel (HSS) and HSS coated with Titanium Nitride ("Excelsior"). Tungsten Carbide:* Designed to be disposable, these carbide cutters don't require any sharpening. (Carbide tips can be sharpened, but require specialized diamond abrasives).* Carbide stays…

    $19.99
  24. Robert Sorby Handled TurnMaster Turning Tools-TurnMaster

    Robert Sorby Handled TurnMaster Turning Tools-TurnMaster

    …(left or right shear) with a simple turn of the head.* Cutters are held in place with a high tensile torx screw which canbe easily removed to change the cutter. Which cutter material should I use? Cutters are available in Tungsten Carbide, High Speed Steel (HSS) and HSS coated with Titanium Nitride…

    From: $108.99
  • Items 1 - 24 of 43
  • Page:
    1. 1
    2. 2
Feedback X