Up Spiral Bits

  • Grid List
  • Page:
    1. 1
  • Items 1 - 11 of 11
  • Page:
    1. 1
  1. Freud Carbide Up-Spiral Router Bits

    Freud Carbide Up-Spiral Router Bits

    …mortises. It's also the ideal bit for pattern routing because when using a guide bushing the best face goes down and templates are attached to the top side. 1/2" shank. Application: Cutting mortises and routing deep blind holes * Freud's solid carbide up spiral bits combine effective chip removal…

    1 Review(s)
    From: $51.47
  2. Freud Up-Spiral Router Bits - 1/4'' Shank

    Freud Up-Spiral Router Bits - 1/4'' Shank

    spiral is perfect for ejecting chips from mortises. It’s also the ideal bit for pattern routing because the best face goes down while cutting, with templates attached to the top. 1/2" shank. Application: Cutting mortises and routing deep blind holes* Freud’s solid carbide up spiral bits

    From: $20.47
  3. Rockler Router Table Box Joint Jig

    Rockler Router Table Box Joint Jig

    …a sacrificial face* Easy-grip knobs lock platform into miter slot* Platform measures 10-3/4" x 12-3/8" x 1/2"* Includes all necessary mounting hardware* The jig requires a straight router bit to match the size of the indexing key.* Up-cut spiral bits deliver the cleanest cuts and prevent blowout.

    60 Review(s)
    $79.99
  4. Up-Cut Spiral Mortising Router Bits

    Up-Cut Spiral Mortising Router Bits

    Onsrud up-cut spiral router bits are perfect for cutting mortises. The up-cut design helps keep the mortise clear of chips and shavings while you cut. Available in high speed steel and solid carbide.

    6 Review(s)
    From: $17.99
  5. Freud 5-Piece Up Cut Spiral Router Bit Set

    Freud 5-Piece Up Cut Spiral Router Bit Set

    …portable routers. Up-Cut Spiral Bit (75-101)* Overall Diameter: 3/16"* Carbide Height: 3/4"* Shank Diameter: 1/4"* Overall Length: 2" Up-Cut Spiral Bit (75-102)* Overall Diameter: 1/4"* Carbide Height: 1"* Shank Diameter: 1/4"* Overall Length: 2-1/2" Up-Cut Spiral Bit (75-104)* Overall Diameter:…

    $159.97
  6. Freud Double Compression Spiral Router Bit

    Freud Double Compression Spiral Router Bit

    The Freud Double Compression Spiral Bit is the ultimate high-performance straight bit, specially designed to eliminate chipping on both sides of the workpiece. This makes it ideal for pattern routing on double-sided panels, edgework, mortises and more. Solid carbide. 1/2" shank. Application: Fine…

    1 Review(s)
    From: $81.97
  7. Leigh Louver Spiral Upcut Bit

    Leigh Louver Spiral Upcut Bit

    1/4" high-speed steel (HSS) spiral upcut bit for use with the Leigh Louver Door Guide Set (33649, sold separately) on the Leigh FMT Frame Mortise and Tenon Jigs (sold separately). The 1/4" Louver bit has a 1/2" shank to stand up to the added forces of cross-grain routing. 3/4" cutter depth.

    $20.99
  8. Conical Ball Bits for CNC Carving Machines-Click-N-Carve Bits

    Conical Ball Bits for CNC Carving Machines-Click-N-Carve Bits

    …possible cut. NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when you also purchase the 1/4" to 4mm Collet Reducer (48789 - Sold Separately). Technical Details:* Solid Tungsten Carbide CNC router bit.* 4mm shank is designed to fit…

    0 Review(s)
  9. End Mill Bits for CNC Carving Machines-Click-N-Carve Bits

    End Mill Bits for CNC Carving Machines-Click-N-Carve Bits

    …possible cut. NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when you also purchase the 1/4" to 4mm Collet Reducer (48789 - Sold Separately). Technical Details:* Solid Tungsten Carbide CNC router bit.* 4mm shank is designed to fit…

  10. Leigh FMT Pro Frame Mortise and Tenon Jig

    Leigh FMT Pro Frame Mortise and Tenon Jig

    …guide, one router bit and one jig setup. Make perfect joints for everything from match-stick frames and miniature tables (rout joints smaller than 1/4" - so tiny they're almost beyond belief!) to full-size chairs and 6-foot garden gates.* It's remarkably easy to set up perfectly aligned multiple…

    8 Review(s)
    $1049.00
  11. Leigh M2 Multiple Mortise and Tenon Attachment

    Leigh M2 Multiple Mortise and Tenon Attachment

    …half-blind dovetails with tails up to 1-1/4" deep. Features:* Mortises and tenons in sizes from 5/16" x 5/8" to 1-1/2" x 2-1/2"* Choice of three corner radii: 5/32", 1/4", or square (with chiseling)* 74-page fully illustrated user guide* Supplied with 1/2" HSS spiral upcut bit (Leigh No.180)* The M2…

    $268.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 11 of 11
  • Page:
    1. 1
Feedback X