V Groove Router Bit

  • Grid List
  • Page:
    1. 1
  • Items 1 - 21 of 21
  • Page:
    1. 1
  1. Solid Carbide Sign Making Router Bit

    Solid Carbide Sign Making Router Bit

    …for routing letters in wood signs and intricate design work in flat panels. 60° V-groove point cuts deeper than a standard 90° bit, for more contrasting shadows and crisper definition at the edge of the groove. Features a three-flute design that has been precision ground to a fine point.

    1 Review(s)
    $59.99
  2. Freud 90 Degree V Grooving Router Bits

    Freud 90 Degree V Grooving Router Bits

    …adding decorative accents to furniture and plaques. Freud's "V" grooving bits are designed to cut deep or shallow 90 degree "V" grooves. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    From: $21.47
  3. Freud - ''V'' Panel Bit Set

    Freud - ''V'' Panel Bit Set

    …paneling from 1/2", 3/4", or 1" thick stock. Neat 45° chamfer produces a classic lined effect, similar to beadboard, while the tongue and groove joint keeps everything precisely aligned once installed.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on table-mounted…

    $177.47
  4. V-Groove Router Bit

    V-Groove Router Bit

    Commonly used for sign-making, this 90° V-groove Bit provides excellent shadow and definition for letters and text. It is also ideal for fluted columns, or for adding a bead-board effect to panels. Top quality bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes.…

    2 Review(s)
    $23.99
  5. Rockler Flush Trim V-Groove Router Bit, 1/2" Diameter x 1" Height - 1/2" Shank

    Rockler Flush Trim V-Groove Router Bit, 1/2" Diameter x 1" Height - 1/2" Shank

    …better to emphasize a seam than to try to hide it. This bit does just that, applying a neat decorative V-groove along the line of the seam. Since you no longer have to sand the joint perfectly flush as you would with a typical flush trim bit, you also cut down on a lot of sanding. Just a pass or two…

    $22.99
  6. Flooring Router Bit Set, Nail Slot

    Flooring Router Bit Set, Nail Slot

    …milling some boards to patch or add to an existing floor, or you want more control over the color match and strip width of a new floor, our flooring bit set is the perfect candidate. The cutters are specially designed for flooring, and feature chamfered edges along the tongue and along the bottom…

    $109.99
  7. V-Groove Router Bits-1/4 Inch Shank

    V-Groove Router Bits-1/4 Inch Shank

    …V-groove bits are available in several angles to cut grooves of varying depths. They are commonly used for sign-making, as the V-groove provides excellent shadow and definition for letters and text. They are also ideal for fluted columns, or for adding a bead-board effect to panels. Top quality bits

    2 Review(s)
    From: $19.99
  8. Rockler 3-Pc. Signmaking Router Bit Set

    Rockler 3-Pc. Signmaking Router Bit Set

    bits separately! This set includes two V-groove bits and a round-nose bit—great for sign text, fluting and other decorative effects. All bits are carbide-tipped, with 1/4" shanks. Set includes:* 19/32" dia. x 33/64" high, carbide tipped , 60° V-groove bit* 1/2" dia., 90° V-groove bit

    2 Review(s)
    $59.99
  9. V-Groove Template Bit

    V-Groove Template Bit

    Whether for fluting, sign-making or decorative scrolls, this V-Groove Template Bit nearly guarantees excellent results. Just use a template to guide the bit with rock-solid precision. Because the router bit is bearing-guided, the template won't wear away over time, and the results will remain…

    $24.99
  10. Rockler 5-Piece CNC Router Bit Set

    Rockler 5-Piece CNC Router Bit Set

    Router Bit Set from Rockler. The set includes three innovative dual-purpose bits, which simultaneously cut your parts to size and apply one of three edge profiles: 1/2-inch cove, 45° chamfer or 1/2-inch roundover. There's no need to remove the parts to machine them again on a traditional router

    $199.99
  11. Freud # 99-472 Beadboard Bit System

    Freud # 99-472 Beadboard Bit System

    …The tongue and groove assembly includes two slot cutters: use the 1/4" cutter to mill a 1/4" thick tongue and groove for 1/2" to 3/4" stock, or switch to the 1/16" cutter for 3/8" material. Once the tongue and groove joints are complete, use the solid carbide Radius V-Groove Bit to rout the beads…

    From: $18.97
  12. Freud 13 Piece Super Bit Set

    Freud 13 Piece Super Bit Set

    bits, a round-over bit, a chamfer bit, a rabbeting bit, a cove bit and a Roman ogee bit. All bits have sturdy 1/2" shanks for minimal vibration, and the set comes in Freud's unique shadow box case, which can hang on the wall or mount on the bench to keep your bits safe and within easy reach. Bits

    2 Review(s)
    $220.47
  13. Edge V-Groove Bit, 1/2" Shank

    Edge V-Groove Bit, 1/2" Shank

    …with these interlocking V-Groove Bits, and you'll never have to worry about misaligned boards again. When it's time to clamp up an edge joint, the parts slide into perfect alignment without any twisting, prying or hammering. The deep channel created by the V-Groove Bit also increases the available…

    1 Review(s)
    From: $39.99
  14. CNC Shark Black Diamond Edition w/FREE $50 Gift Card and Accessory Bundle

    CNC Shark Black Diamond Edition w/FREE $50 Gift Card and Accessory Bundle

    …Hold-down Clamps.* Mount for Router included (Router sold separately).* One year warranty on parts and labor, special shipping exclusions apply.* Download free project plans from Vectric* Made in the USA CNC Shark Black Diamond is fully compatible with the following routers (sold separately):* Bosch…

    0 Review(s)
    $4289.98
  15. CNC Shark Routing System, with New 7.0 Software

    CNC Shark Routing System, with New 7.0 Software

    …included (over $900 value).* Includes 3/8" Diameter V-Groove Router Bit* Includes two Hold-down Clamps* Includes mounts for a Bosch Router (Router Motor is not included, sold separately) * Fully compatible with the Bosch Colt Palm Router* Free downloadable control program included* Download free…

    20 Review(s)
    $2899.99
  16. CNC Shark Pro Plus Routing System - Limited Quantities

    CNC Shark Pro Plus Routing System - Limited Quantities

    …compatible with the Bosch Colt Palm Router and includes a 1/2" diameter V-groove router bit. The CNC Shark also includes version 7.0 of the VCarve Pro software interface - a $600 value. You supply a PC computer with USB 2.0 port and a Bosch Colt router (router sold separately). Simply connect the…

    15 Review(s)
    $3799.99 $3499.99
  17. Freud # 20-152 V Grooving Bit, 60°, 1/2'' Dia. x 1/2'' H x 1/4'' Sh.

    Freud # 20-152 V Grooving Bit, 60°, 1/2'' Dia. x 1/2'' H x 1/4'' Sh.

    …adding decorative accents to furniture and plaques. Freud's "V" grooving bits are designed to cut deep or shallow 60 degree "V" grooves. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    $30.47
  18. Freud # 91-108 9-Piece Basic Router Bit Set, 1/2'' Shank

    Freud # 91-108 9-Piece Basic Router Bit Set, 1/2'' Shank

    …(B): 1/2"* Shank (C): 1/2"* Overall Height: 2-3?8" Bearing Flush Trim Bit:* Freud #: 42-109* Overall Diameter (A): 1/2"* Bearing Diameter: 1/2"* Carbide Height (B): 1/2"* Shank (C): 1/2"* Overall Height: 2-7/8" "V" Grooving Bit:* Freud #: 20-108* Overall Diameter (A): 3/4"* Carbide Height (B): 1/2"*…

    $176.47
  19. Rockler Flush Trim V-Groove Router Bit, 1/2" Diameter x 1" Height - 1/4" Shank

    Rockler Flush Trim V-Groove Router Bit, 1/2" Diameter x 1" Height - 1/4" Shank

    Top quality bits that meet the high demands of Rockler Woodworking and Hardware. Bit has two flutes and 5/8" ball bearing guide. Use to trim cabinet face frames flush with cabinet sides - decorative V-groove conceals the seam.

    $21.99
  20. CNC Shark Pro Plus

    CNC Shark Pro Plus

    …fully compatible with the Bosch Colt Palm Router and includes a 3/8" diameter V-groove router bit. The CNC Shark also includes VCarve Pro 7 and Cut3D design software a $900 value. You supply a PC computer with USB 2.0 port and a Bosch Colt router (router sold separately). Simply connect the USB…

    $3799.99 $3699.99
  21. CNC Shark HD Version 2.0 Routing System

    CNC Shark HD Version 2.0 Routing System

    …and greater accuracy.* USB interface.* Download free project plans from Vectric* Also includes: 3/8" dia. V-groove Bit and two hold-down clamps!* Mount for Router included (Router sold separately).* Z travel up to 7 inches max (2 inches more the regular plus).* X and Y axis have supported linear…

    $3999.99 $3899.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 21 of 21
  • Page:
    1. 1
Feedback X