Veneer Cutter

  • Grid List
  • Page:
    1. 1
  • Items 1 - 4 of 4
  • Page:
    1. 1
  1. Piloted Flush Trim Bits 1/2" Shank

    Piloted Flush Trim Bits 1/2" Shank

    …shaft, below the blades, which lets you trim face frames flush with cabinet sides, shelf caps flush with shelves, or veneers and laminates flush with the substrate. The cutter can also be used for template work where the template is below the worked material or, alternatively, with a router mounted…

    $27.99 From: $18.99

    SAVE 32%

  2. Piloted Flush Trim Bits 1/4" Shank

    Piloted Flush Trim Bits 1/4" Shank

    …shaft, below the blades, which lets you trim face frames flush with cabinet sides, shelf caps flush with shelves, or veneers and laminates flush with the substrate. The cutter can also be used for template work where the template is below the worked material or, alternatively, with a router mounted…

    From: $15.99
  3. Undersized Router Bits-1/4 Inch  Shank

    Undersized Router Bits-1/4 Inch Shank

    …and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut grooves, dadoes and rabbets. Of course, they can also be used for general purpose material removal or any application which requires a flat, finished bottom. The two-flute cutters give…

    21 Review(s)
    From: $13.99
  4. Undersized Router Bits-1/2 Inch  Shank

    Undersized Router Bits-1/2 Inch Shank

    …and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut grooves, dadoes and rabbets. Of course, they can also be used for general purpose material removal or any application which requires a flat, finished bottom. The two-flute cutters give…

    21 Review(s)
    $20.99 From: $13.99

    SAVE 33%

  • Grid List
  • Page:
    1. 1
  • Items 1 - 4 of 4
  • Page:
    1. 1
Feedback X