Viscosity

  • Items 1 - 24 of 27
  • Page:
    1. 1
    2. 2
  1. HVLP Spray System

    HVLP Spray System

    …0.9mm tip works better with latex paints and the 1.8mm tip is better for oil-based paints.* 15' hose for maximum flexibility and convenience * Viscosity cup for accurate thinning* Operating and cleaning instructions; Instructions include information on how to thin material and more!* Small amounts…

    164 Review(s)
    $146.99
  2. Titebond Instant Bond Wood Adhesive - Thin Viscosity

    Titebond Instant Bond Wood Adhesive - Thin Viscosity

    These high-performance CA glues (cyanoacrylate adhesives) take just 5-15 seconds to set and 30-60 seconds for initial cure. For even faster adhesion, the Instant Bond Activator cuts set time nearly in half! Designed primarily for wood and wood products, these adhesives also provide strong, permanent…

    5 Review(s)
    From: $12.59
  3. Titebond Instant Bond Wood Adhesive - Medium Viscosity

    Titebond Instant Bond Wood Adhesive - Medium Viscosity

    These high-performance CA glues (cyanoacrylate adhesives) take just 5-15 seconds to set and 30-60 seconds for initial cure. For even faster adhesion, the Instant Bond Activator cuts set time nearly in half! Designed primarily for wood and wood products, these adhesives also provide strong, permanent…

    5 Review(s)
    From: $12.59
  4. Titebond Instant Bond Wood Adhesive - Thick Viscosity

    Titebond Instant Bond Wood Adhesive - Thick Viscosity

    These high-performance CA glues (cyanoacrylate adhesives) take just 5-15 seconds to set and 30-60 seconds for initial cure. For even faster adhesion, the Instant Bond Activator cuts set time nearly in half! Designed primarily for wood and wood products, these adhesives also provide strong, permanent…

    5 Review(s)
    From: $12.59
  5. Earlex Fluid Tip Needles

    Earlex Fluid Tip Needles

    …Tip Needle for the job! Larger needles are ideal for higher viscosity, thicker materials where the finish is less important. Smaller needles are an excellent choice when your goal is getting a high-quality finish using lower viscosity materials.* Use the 1.0mm needle for cellulose, acrylics,…

    $41.99
  6. High-Performance Glue Sticks, 12-pk

    High-Performance Glue Sticks, 12-pk

    …bonds laminates, plastics, ceramics and more.* High-temperature formula — ideal for materials that require a strong bond.* Yellow color.* Working time: 30-40 seconds.* Setup time 35-45 seconds.* Medium viscosity allows high delivery rates.* 10" x 0.44" glue sticks.* Odorless, never go bad.

    $8.39
  7. Dewalt DC545K 18V Cordless Adhesive Dispenser - 10oz

    Dewalt DC545K 18V Cordless Adhesive Dispenser - 10oz

    …rotateable cartridge holder fits 10oz, 1/10 gal, and 300ml to 310ml cartridges* Tool delivers up to 650 pounds pushing force to dispense the highest viscosity adhesives and sealants* Auto-reverse feature helps reduce drips, waste, & clean-up* Set-and-Forget variable speed control for consistent…

    $288.99
  8. Apollo ECO-4 Four-Stage HVLP Spray System with E7000 Non-Bleeder Spray Gun

    Apollo ECO-4 Four-Stage HVLP Spray System with E7000 Non-Bleeder Spray Gun

    …turbine that generates a full 9.0 PSI, more than most other 4-stage turbines in its class. It is capable of spraying an even wider range of coating viscosities than the ECO-3. It's dual filter QT™ Quiet Technology makes for extremely quiet operation. This package includes the E7000 non-bleeder…

    $749.00
  9. Apollo ECO-4 Four-Stage HVLP Spray System with E5011 Bleeder Spray Gun

    Apollo ECO-4 Four-Stage HVLP Spray System with E5011 Bleeder Spray Gun

    …that generates a full 9.0 PSI, more than most other 4-stage turbines in its class. It is capable of spraying an even wider range of coating viscosities than the ECO-3. It's dual filter QT™ Quiet Technology makes for extremely quiet operation. This package includes the E5011 bleeder-style…

    $699.00
  10. RotFix Wood Restoration and Repair

    RotFix Wood Restoration and Repair

    Rot Fix is an easy to use, low viscosity epoxy wood sealer, primer, and consolidant for repair and restoration of rotted, deteriorated, dried out or spongy wood. It creates a strong, water-resistant base for repair and restoration, suitable for both interior and exterior use. Recommended Uses: Use…

    $41.99
  11. Quick-Set Glue- 4.5 oz

    Quick-Set Glue- 4.5 oz

    …adhesive) has a clear, fast cure and strong bond for a variety of materials, including wood, metal, glass, rubber, ceramics and plastic. Choose a viscosity that does not absorb completely into the surfaces to be bonded.* CA-Thin has fast setting and curing for relatively non-porous surfaces.*…

    10 Review(s)
    From: $14.19
  12. Apollo ECO-3 Three-Stage HVLP Spray System with E5011 Bleeder Spray Gun

    Apollo ECO-3 Three-Stage HVLP Spray System with E5011 Bleeder Spray Gun

    …a reputation as premier HVLP systems. The Apollo ECO-3 features an efficient 3-stage turbine ideal for spraying a wide range of thin to medium viscosity finishes. At 7.0 PSI, it generates more power and pressure than other 3-stage turbines in its class. It's dual filter QT™ Quiet Technology…

    $599.00
  13. Apollo ECO-3 Three-Stage HVLP Spray System with E7000 Non-Bleeder Spray Gun

    Apollo ECO-3 Three-Stage HVLP Spray System with E7000 Non-Bleeder Spray Gun

    …a reputation as premier HVLP systems. The Apollo ECO-3 features an efficient 3-stage turbine ideal for spraying a wide range of thin to medium viscosity finishes. At 7.0 PSI, it generates more power and pressure than other 3-stage turbines in its class. It's dual filter QT™ Quiet Technology…

    $649.00
  14. Sculpwood Moldable Epoxy Putty

    Sculpwood Moldable Epoxy Putty

    …variety of substrates. It is easily sanded and will accept paint, screws and nails. It is most commonly used in conjunction with Rot Fix , a low viscosity wood sealer and consolidant. Recommended Uses: Use SculpWood for replacing missing sections of windowsills, frames and furniture or for adding…

    5 Review(s)
    From: $16.49
  15. Mesh Tip Filters for Graco TrueCoat® Paint Sprayers

    Mesh Tip Filters for Graco TrueCoat® Paint Sprayers

    …Use the coarse 60-mesh tip filters for latex paints, enamels, and primers. Use the fine 100-mesh tip filters for stains, lacquers and other thin viscosity materials. Sold in packs of three. Technical Details:* For use with the Graco TrueCoat® Pro II and TrueCoat® Pro Fine Finish sprayers…

    $11.99
  16. Quick-Set Glue-2.5 oz

    Quick-Set Glue-2.5 oz

    …adhesive) has a clear, fast cure and strong bond for a variety of materials, including wood, metal, glass, rubber, ceramics and plastic. Choose a viscosity that does not absorb completely into the surfaces to be bonded.* CA-Thin has fast setting and curing for relatively non-porous surfaces.*…

    10 Review(s)
    From: $9.49
  17. Apollo ECO-5 Five-Stage HVLP Spray System with E7000 Non-Bleeder Spray Gun

    Apollo ECO-5 Five-Stage HVLP Spray System with E7000 Non-Bleeder Spray Gun

    …5-stage turbine available at this price point. It generates a full 9.5 PSI, enough to atomize and spray the fullest range of viscosities, including high viscosity products like unthinned latex (emulsion) paints. It's dual filter QT™ Quiet Technology makes for substantially quieter operation…

    $899.00
  18. Apollo ECO-5 Five-Stage HVLP Spray System with E5011 Bleeder Spray Gun

    Apollo ECO-5 Five-Stage HVLP Spray System with E5011 Bleeder Spray Gun

    …5-stage turbine available at this price point. It generates a full 9.5 PSI, enough to atomize and spray the fullest range of viscosities, including high viscosity products like unthinned latex (emulsion) paints. It's dual filter QT™ Quiet Technology makes for substantially quieter operation…

    $849.00
  19. Old Brown Glue

    Old Brown Glue

    …wood finishing, so there is no risk of glue spots spoiling your final finish.* Viscosity is a function of temperature, and ranges from rather thick above 75°F, to very runny at higher temperatures. * Glue viscosity is best above 120°F.* Do not dilute or heat above 160°F. * Apply to clean…

    1 Review(s)
    From: $8.49
  20. Pro 100 Hot Glue Gun

    Pro 100 Hot Glue Gun

    …laminates, plastics, ceramics and more.* High Temperature Formula - ideal for materials that require a strong bond.* Yellow color.* Working time: 30-40 seconds.* Set-up time 35-45 seconds.* Medium viscosity allows high delivery rates.* Includes: Twelve 10" glue sticks.* Odorless, never goes bad.

    2 Review(s)
    $24.69
  21. SculpWood Paste, 4 oz.

    SculpWood Paste, 4 oz.

    …repair, and the best resistance to further rot, use both SculpWoodPutty and Sculpwood Paste with System Three RotFix (23249, sold separately), alow viscosity wood sealer and consolidant. Technical Details:* SculpWood Paste is a 2-component, solvent-free, epoxy resin.* Soft spackle-like consistency…

    $16.49
  22. WEST SYSTEM&reg Epoxy-Epoxy Resin

    WEST SYSTEM® Epoxy-Epoxy Resin

    …resistance, and is designed specifically for wood fiber, fiberglass, reinforcing fabrics and a variety of metals. 105 Resin * 105 Resin viscosity is approximately 1000 cP (centipoise) at 72°F (22°C).* Coverage for "A" resin containers: Porous surfaces: 90-105 sq. ft. (8.5-10m2)Non-porous…

    2 Review(s)
    From: $54.99
  23. WEST SYSTEM&reg Epoxy-Hardener

    WEST SYSTEM® Epoxy-Hardener

    …resistance, and is designed specifically for wood fiber, fiberglass, reinforcing fabrics and a variety of metals. 105 Resin * 105 Resin viscosity is approximately 1000 cP (centipoise) at 72°F (22°C).* Coverage for "A" resin containers: Porous surfaces: 90-105 sq. ft. (8.5-10m2)Non-porous…

    2 Review(s)
    From: $24.99
  24. WEST SYSTEM&reg Epoxy-Filler

    WEST SYSTEM® Epoxy-Filler

    …resistance, and is designed specifically for wood fiber, fiberglass, reinforcing fabrics and a variety of metals. 105 Resin * 105 Resin viscosity is approximately 1000 cP (centipoise) at 72°F (22°C).* Coverage for "A" resin containers: Porous surfaces: 90-105 sq. ft. (8.5-10m2)Non-porous…

    2 Review(s)
    From: $15.99
  • Items 1 - 24 of 27
  • Page:
    1. 1
    2. 2
Feedback X