Vise Screw

  • Grid List
  • Page:
    1. 1
  • Items 1 - 23 of 23
  • Page:
    1. 1
  1. 9" Press Screw

    9" Press Screw

    Use to make veneer press frames, case clamps, plus portable and stationary jigs.Removable swivel permits easy installation. Castings are malleable iron with a baked enamel finish. Threaded nut drives into a 1" hole. Swivel face is 1-3/8" x 1-5/8". 11/16" diameter with deep, smooth threads.

    $21.49
  2. Heavy Duty Quick Release Front  Vise

    Heavy Duty Quick Release Front Vise

    Slides open or closed in seconds! This powerful vise is perfect for custom workbenches. A quick-release mechanism engages with a 1/4 turn of the handle, letting you make major adjustments almost instantaneously. Two 3/4" dia. solid steel guide rods provide absolute resistance to racking, while an…

    25 Review(s)
    $103.99
  3. Sjobergs Smart Vise

    Sjobergs Smart Vise

    …Smart Vise also works great as a carving vise. It offers three mounting options: dowels for drop-in ease, clamps for a firmer connection, and screws for the ultimate in stability. Jaws open to 4-1/2". Technical Details:* The Sjobergs Smart Vise measures 14-1/4" x 14-1/4" when the vise is closed.*…

    0 Review(s)
    $148.99 $138.99
  4. Large Push Action Clamp

    Large Push Action Clamp

    …work pieces. Technical Details:* Bottom of rubber clamp foot adjusts from 3/8" above mounting surface to 5/8" below mounting surface.* Total length with arm extended and lever down 5-5/8".* Length of arm only, extended is 2-1/4"* Mounting plate is 2" W x 3-1/4" L.* Mounting screws not included.

    1 Review(s)
    $22.99
  5. Rockler CNC Table

    Rockler CNC Table

    At 28" x 40", it's large enough to accommodate any CNC Shark, as well as most other consumer CNC routers. Your controller hangs conveniently below the table in a saddle-shaped bracket, and is easy to access for emergency shut-downs. With its sturdy steel stand as a foundation, you'll get rock-solid…

    $249.99
  6. 9'' Quick Release Workbench Vise

    9'' Quick Release Workbench Vise

    …drilled out for easy attachment of wooden vise pads.* Features adjustable pop-up dog on vise face for clamping panels in conjunction with bench dogs.* Manufactured from close-grained cast iron.* With hardwood handle.* Vise faces are 2-7/8" high.* 7/8" screw diameter.* Easy to install on your…

    19 Review(s)
    $159.99
  7. 12'' Quick Release End Vise

    12'' Quick Release End Vise

    vise.* Handle plate is drilled out and countersunk for easy attachment of wooden jaws (not included) with #12 wood screws.* 19" screw and body length.* 13" overall travel before wooden jaws are added.* 1" dia. guide rods.* Includes hardwood handle.* Easy to install with included instructions.* Vise

    32 Review(s)
    $179.99
  8. Frame Clamp Kit

    Frame Clamp Kit

    Tightens all four corners simultaneously for ease of use. Adjustable clamp is self-squaring as it pulls all four corners together. Reversible jaws work for either small or large frames. Clamps anywhere in a range from 5" x 7" to 26" x 30" . Quickly and easily folds for compact storage. Technical…

    39 Review(s)
    $34.99 $24.99

    SAVE 29%

  9. Small T-Handle Clamp

    Small T-Handle Clamp

    …Its holding capacity is approximately 200 pounds. * Bottom of rubber foot adjusts from 1/4" above mounting surface to 3/8" below mounting surface. Total length with arm extended and T-handle up is 2-5/8". Height is 2-1/4".* Mounting plate is 1-9/16" W x 1" L.* Does not include mounting screws.

    1 Review(s)
    $16.99
  10. Adjustable Multi-Function Shop Stand Stretchers

    Adjustable Multi-Function Shop Stand Stretchers

    Available in four sizes: 18", 24", 36" and 48". Each size includes four stretchers. Top stretchers can be mounted flush with top or 4" down to add drawer or woodworking vice. Maximum stand size is 48" x 48". All parts coated with durable black sand paint. Shop stand hinges come complete with nuts…

    $29.99 From: $24.99

    SAVE 17%

  11. 6'' Clamp-On Bench Vise

    6'' Clamp-On Bench Vise

    Portable woodworking vise can be clamped or screwed onto a bench or other work surface. With 6" wide jaw and 4-1/2"jaw opening. Technical Details:* Main screw, guide rods and handle are chrome-plated for corrosion resistance.* Lightweight cast-iron body.* Toe-in feature provides even clamping…

    8 Review(s)
    $39.99
  12. 7'' Woodworker's Bench Vise

    7'' Woodworker's Bench Vise

    …and tear, and give vises a smooth and true parallel action.* Square body seating provides easy fit under benchtop so jaws are flush with bench.* With 1/2" diameter handle.* Toe-in feature provides even clamping pressure on the whole depth of the workpiece.* Steel main screw with Acme threads for…

    9 Review(s)
    $89.99
  13. Bench Cookie Plus® Work Grippers with Sawhorse Clips, 4-Pack

    Bench Cookie Plus® Work Grippers with Sawhorse Clips, 4-Pack

    …that is easily resizeable for any workpiece. The grip is so secure, it's almost like having a fully-equipped workbench with dog holes and a vise. Kit Includes the following:* Bench Cookie Plus® Work Grippers, 4-Pack* Sawhorse Clips for Bench Cookie Plus®, 4-Pack Bench Cookie Plus®…

    $19.99
  14. Stainless Steel Pizza Cutter Turning Kit, Chrome Finish

    Stainless Steel Pizza Cutter Turning Kit, Chrome Finish

    …with a handscrew or a drill press vise and manually turn the drill press chuck to drive the insert into the stock. DO NOT TURN ON THE DRILL PRESS. The drill press will keep the insert square to the stock as it is threaded in. We also recommend using beeswax, screw lube, or even soap to lubricate the…

    21 Review(s)
    $19.99 $15.99

    SAVE 20%

  15. 7'' Quick Release Workbench Vise

    7'' Quick Release Workbench Vise

    …drilled out for easy attachment of wooden vise pads.* Features adjustable pop-up dog on vise face for clamping panels in conjunction with bench dogs.* Manufactured from close-grained cast iron.* With hardwood handle.* Vise faces are 2-7/8" high.* 7/8" screw diameter.* Easy to install on your…

    14 Review(s)
    $124.99
  16. Kreg Toolboxx w/Pocket Hole Start Up Kit

    Kreg Toolboxx w/Pocket Hole Start Up Kit

    …stock up to 2-3/4'' thick. Screw Selector Wheel: Quickly shows you the correct screw to use with various material thicknesses.Just dial in the thickness of each piece to be joined - whether those thicknessesare the same or different and the wheel shows you the correct screw lengthand Kreg Jig®…

    $106.00
  17. Sawhorse Clips for Bench Cookie Plus® Pack of 4 Clips

    Sawhorse Clips for Bench Cookie Plus® Pack of 4 Clips

    …Bench Cookie® Plus Sawhorse Clips are constructed of black spring steel.* Includes four sawhorse clips and four pan-head screws.* Not compatible with original Bench Cookies, which lack a threaded insert.* Pan-head screws are 5/16 x 18T x 1/2".* Designed to fit over 2x material (1-1/2" thick).

    $10.49
  18. Adjustable Carving Vise/Carvers Mallet-Select Option

    Adjustable Carving Vise/Carvers Mallet-Select Option

    Adjustable Carving Vise Firmly grips your work piece! Attaches to almost any style of workbench or top, and swings out of the way when not in use. Adjustable in all directions for maximum maneuverability. Attaches to workbench with screws (not included). Then drill a hole through the workbench and…

    2 Review(s)
    From: $43.99
  19. Kreg Premium Face Clamp

    Kreg Premium Face Clamp

    …on the Premium Kreg Face Clamp enable you to clamp directly over the joint line, ensuring a perfectly flush seam. Without a face clamp, the pocket screw can follow the grain of the wood, resulting in misalignment. The vise-grip style clamp action makes it easy to engage and disengage the Kreg clamp…

    7 Review(s)
    $21.99
  20. Wilton Pivot-Jaw Woodworking Vise

    Wilton Pivot-Jaw Woodworking Vise

    …standard vise and the jaws will rack, leading to inadequate clamping pressure and premature wear on the screw. The Wilton Pivot-Jaw Vise solves this problem with a pivoting front plate that automatically adapts to any angle up to 10°. In addition, a sturdy U-channel guide bar protects the screw

    $199.99 $119.99

    SAVE 40%

  21. Small Push Clamp

    Small Push Clamp

    …works great with shop-made jigs, auxiliary fences, or simply for keeping a work piece secure. Attach it to a bench or fixture for convenient, versatile clamping. Technical Details:* Plunger travels 5/8".* Mounting plate is 1-1/16" W x 1-3/8" L.* Does include wood screws for mounting - brass colored.

    5 Review(s)
    $11.99
  22. Stainless Steel Pizza Cutter Turning Kit, Brass Finish

    Stainless Steel Pizza Cutter Turning Kit, Brass Finish

    …handscrew or a drill press vise and manually turn the drill press chuck to drive the insert into the stock. Safety Tip: MAKE SURE DRILL PRESS IS UNPLUGGED. The drill press will keep the insert square to the stock as it is threaded in. We also recommend using beeswax, screw lube, or even soap to…

    $19.99
  23. Rockler 24'' x 36'' Shop Stand

    Rockler 24'' x 36'' Shop Stand

    …1/8" steel, with adjustable levelers for various height settings. Top stretchers can be mounted flush with top or 4" down to add drawer or vise. All parts coated with durable black sand paint. Technical Details:* Steel base measures 24"W x 36"L x 32"H.* Perfect for a CNC table, work station,…

    1 Review(s)
    $159.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 23 of 23
  • Page:
    1. 1
Feedback X