Wax Sticks

  • Grid List
  • Page:
    1. 1
  • Items 1 - 7 of 7
  • Page:
    1. 1
  1. Behlen Fill Sticks

    Behlen Fill Sticks

    …rub it in and wipe it off. Behlen Fill Sticks accept any top coat finish. Recommended for use with wooden furniture, picture frames, hard leather surfaces, plastics and paneling. Technical Details:* Although Behlen Fill Sticks can be used cold, warming the stick slightly can help with application in…

    $3.99
  2. Blade Lubricant Stick

    Blade Lubricant Stick

    The blade lubricant stick extends the life of saw blades, keeping them sharper longer. A special blend of oils and wax helps protect blades from heat damage and clogging because of the accumulation of wood, pitch and metal chips. Excellent performance on band saw, scroll saw and coping saw blades.…

    4 Review(s)
    $8.49
  3. Stick Fast CA Wood Finish Starter Kit

    Stick Fast CA Wood Finish Starter Kit

    Create a glassy smooth pen finish in record time with the Stick Fast CA Wood Finishing Kit! This remarkable finish has all the fast-curing properties of other CA finishes, along with a longer working time of 50-60 seconds. It also boasts increased flexibility, which eliminates the cracking that…

    $29.99
  4. High Friction Build Polish

    High Friction Build Polish

    …Build Friction Polish with a lint-free cotton clothwhile the wood is turning. Once the desired build is achieved, finish with the edge of acarnuba wax stick (sold separately) and burnish with a dry cloth. 500mL. Caution: Flammable. Keep out of eyes and off of skin. Use in a well-ventilated area.

    $24.99
  5. Freud® LU89M Industrial Thick Non-Ferrous Metal Saw Blades

    Freud® LU89M Industrial Thick Non-Ferrous Metal Saw Blades

    …Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray of WD-40 or other lubricant every 4 to 5 cuts. Wax sticks are not recommended. The Silver I.C.E.™ (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than standard,…

    1 Review(s)
    From: $74.97
  6. Freud® LU77M Industrial Thin Kerf Non-Ferrous Metal Saw Blades

    Freud® LU77M Industrial Thin Kerf Non-Ferrous Metal Saw Blades

    …Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray of WD-40 or other lubricant every 4 to 5 cuts. Wax sticks are not recommended. The Silver I.C.E.™ (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than standard,…

    From: $62.47
  7. Freud® LU90M Industrial Thin Stock Non-Ferrous Metal Saw Blades

    Freud® LU90M Industrial Thin Stock Non-Ferrous Metal Saw Blades

    …lubricant when cutting non-ferrous materials. This can be accomplished with a spray of WD-40 or other similar type of lubricant every 4 or 5 cuts. Wax sticks are not recommended. The Silver I.C.E.™ (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than…

    From: $104.47
  • Grid List
  • Page:
    1. 1
  • Items 1 - 7 of 7
  • Page:
    1. 1
Feedback X