Wood Circles

  • Grid List
  • Page:
    1. 1
  • Items 1 - 24 of 24
  • Page:
    1. 1
  1. Rockler Circle Cutting Jig

    Rockler Circle Cutting Jig

    …perfectly arced circles (one pin is used for soft woods, use the other if your design allows drilling a center hole). A recessed groove in the jig lets you slide the center pivot pin (your center point) up or down the length of the jig to find the correct, exact diameter of your circle. Use the…

    6 Review(s)
    $29.99
  2. MPower Combination Router Base CRB7

    MPower Combination Router Base CRB7

    …workpieces.* Compass/Circle Cutter: Use the magnetic pin stored in the base to rout precision circles and holes, even holes that are actually smaller than the base of the router! CRB can rout circles from 3/4" to 8-3/4" radius, using a 1/4" straight bit.* Offset Base Plate: Increases overall router…

    7 Review(s)
    $79.99
  3. Heavy-Duty Circle Cutter

    Heavy-Duty Circle Cutter

    Adjustable cutter is designed for use on your drill press to make circular cuts 1-3/4" to 7-7/8" in diameter in wood, plastic, brass, copper, aluminum and more. For the smoothest circles possible, cut half way through your material, then flip it over to finish the cut from the back. Technical…

    11 Review(s)
    $35.69
  4. Circle Cutter

    Circle Cutter

    Produce precision circles in sheet metal, brass, copper, soft steel, aluminum, plastic, wood and composite materials.* Cuts circles ranging from 7/8" to 4" diameter.* Comes with replaceable 3/16" cutting blade.* Maximum safe speed is 500 RPM.

    4 Review(s)
    $20.59
  5. Bendix 1080 Carved Open Circle Moulding

    Bendix 1080 Carved Open Circle Moulding

    …a look of distinction to any project, adding ornamentation to the strong foundation you have built. Each piece is precisely shaped, sanded and ready for finishing. Open circle moulding measures 1/4"D x 2-1/4"H, is made of European Beech, and sold in 8 foot lengths. Extra shipping charges may apply.

    $39.99
  6. Bendix 1079 Carved Circle Moulding

    Bendix 1079 Carved Circle Moulding

    …add a look of distinction to any project, adding ornamentation to the strong foundation you have built. Each piece is precisely shaped, sanded and ready for finishing. Circle moulding measures 3/16"D x 1-1/2"H, is made of European Beech, and sold in 8 foot lengths. Extra shipping charges may apply.

    $24.99
  7. Round Country Table Base Kits-46" Diameter Table Base Kits

    Round Country Table Base Kits-46" Diameter Table Base Kits

    …creates an incredibly durable, seamless joint with the apron. The apron is composed of two perfect semi-circles, steam-bent from solid unlaminated wood. Also includes two pre-drilled apron joiner cleats, mounting screws for your top and assembly instructions. All table bases are 29" high. Legs are…

    $330.19
  8. Full Circle 2 Shelf Lazy Susan, Rev-a-Shelf 6012 Series-18" Diameter

    Full Circle 2 Shelf Lazy Susan, Rev-a-Shelf 6012 Series-18" Diameter

    The 6012 Series by Rev-a-Shelf is a two shelf Full Circle System with dependently rotating shelves, available in 18" diameter. These polymer full circle sets feature a ¾" zinc diameter shaft system for absolute durability and a telescoping shaft accommodating heights from 26"-32". Shelves are…

    From: $51.49
  9. Bendix 1466 Embossed Circles Moulding

    Bendix 1466 Embossed Circles Moulding

    These elegant mouldings will add a look of distinction to any project, adding ornamentation to the strong foundation you have built. Each piece is precisely shaped, sanded and ready for finishing. Moulding measures 5/16"D x 1-3/8"H, is made of European Beech, and sold in 8 foot lengths. Extra…

    $19.99
  10. Bendix Embossed Circle Ornament

    Bendix Embossed Circle Ornament

    These elegant mouldings will add a look of distinction to any project, adding ornamentation to the strong foundation you have built. Each piece is precisely shaped, sanded and ready for finishing. Ornament has a 3-1/2" diameter and is made of plywood with a Luan veneer.

    $3.99
  11. Rockler Trim Router Circle Jig

    Rockler Trim Router Circle Jig

    …perfect circles: one sharp one, which is used for soft woods, and one blunt one, which is used if your design allows for drilling a center hole. A routed channel in the jig lets you slide the center pivot pin up or down the length of the jig to match the exact diameter of your circle. Use the 4-star…

    $36.99
  12. Sonicrafter® 2-1/2'' HSS Circle Saw Blade RW9118

    Sonicrafter® 2-1/2'' HSS Circle Saw Blade RW9118

    Cut thin wood, plastic, fiberglass, non-ferrous metals, thin sheet metal, hardened fillers and window glazing with these versatile blade. This blade can also be used for linear and plunge cutting.

    $31.49
  13. Full Circle 2 Shelf Lazy Susan, Rev-a-Shelf 6012 Series-24" Diameter

    Full Circle 2 Shelf Lazy Susan, Rev-a-Shelf 6012 Series-24" Diameter

    The 6012 Series by Rev-a-Shelf is a two shelf Full Circle System with dependently rotating shelves, available in 24" diameter. These polymer full circle sets feature a ¾" zinc diameter shaft system for absolute durability and a telescoping shaft accommodating heights from 26"-32". Shelves are…

    $64.49
  14. Full Circle 2 Shelf Lazy Susan, Rev-a-Shelf 6012 Series-28" Diameter

    Full Circle 2 Shelf Lazy Susan, Rev-a-Shelf 6012 Series-28" Diameter

    The 6012 Series by Rev-a-Shelf is a two shelf Full Circle System with dependently rotating shelves, available in 28" diameter. These polymer full circle sets feature a ¾" zinc diameter shaft system for absolute durability and a telescoping shaft accommodating heights from 26"-32". Shelves are…

    $77.99
  15. Woodworking with the Router Book

    Woodworking with the Router Book

    …376 pages.* A Reader's Digest book. Learn the best ways to: * Cut decorative edgings and moldings* Surface wood and joint edges for glue-ups* Shape furniture parts* Cut curves, circles and ovals* Make cope-and-stick frames, and raise panels* Cut strong, practical joints of all kinds - dadoes,…

    3 Review(s)
    $24.95
  16. Fluted/Beaded Moldings and Rosettes-Fluted/Beaded Moldings 3" W x 4' L x 3/4" Thick

    Fluted/Beaded Moldings and Rosettes-Fluted/Beaded Moldings 3" W x 4' L x 3/4" Thick

    Unfinished moldings are dual-sided: Fluted on one side and beaded on the other side. For the finishing touch add fluted or beaded molding and rosettes. Molding is 3" W x 4' L x 3/4" thick. Rosettes are 3" x 3". See our complete selection of Embossed Carvings.

    1 Review(s)
    From: $32.49
  17. Fluted/Beaded Moldings and Rosettes-Rosettes

    Fluted/Beaded Moldings and Rosettes-Rosettes

    For the finishing touch add fluted or beaded molding and rosettes. Molding is 3" W x 4' L x 3/4" thick. Rosettes are 3" x 3". See our complete selection of Embossed Carvings.

    From: $9.39
  18. Rockwell® Blade Runner™ Jig Saw, Multi-Purpose Precision Cutter

    Rockwell® Blade Runner™ Jig Saw, Multi-Purpose Precision Cutter

    Get more bang for your buck with a saw that does it all! This multi-purpose saw makes straight cuts or curved cuts on everything from wood and metal to ceramic tile, plastic, PVC and more.* Use it in your shop or take it to your job site - weighs just over 17 lbs.* Uses standard T-shank jigsaw…

    21 Review(s)
    $178.99
  19. Replacement 1/4" Cutting Blade

    Replacement 1/4" Cutting Blade

    Replacement 1/4" cutting blade for the adjustable Heavy-Duty Circle Cutter (42887, sold separately), which allows you to use your drill press to make circular cuts 1-3/4" to 7-7/8" in diameter in wood, plastic, brass, copper, aluminum and more.

    $10.49
  20. Round Country Table Base Kits-39" Diameter Table Base Kits

    Round Country Table Base Kits-39" Diameter Table Base Kits

    …creates an incredibly durable, seamless joint with the apron. The apron is composed of two perfect semi-circles, steam-bent from solid unlaminated wood. Also includes two pre-drilled apron joiner cleats, mounting screws for your top and assembly instructions. All table bases are 29" high. Legs are…

    From: $309.59
  21. Stock Center Finder

    Stock Center Finder

    …lathe or other purposes. No need for special calculations. This easy-to-use finder has no moving parts, so your measurements will be simple and consistent. Technical Details* Transparent yellow tinted plastic* Maximum 8" circle, octagon and square or 5-3/4" hexagon* Made of impact resistant plastic

    6 Review(s)
    $9.79
  22. Walnut Hollow® Creative Versa-Tool Woodburning Kit

    Walnut Hollow® Creative Versa-Tool Woodburning Kit

    …razor cuts and shapes a variety of materials.* Transfer Point: Transfers photocopies of black and white laser and color laser images onto surfaces.* 3 Stamping Points: Circle, Square and Star Points can be used seperately or together to create interesting patterns and borders on multiple surfaces.

    1 Review(s)
    $27.99
  23. Olson® All Pro™ Band Saw Blade Assortment, 93-1/2''

    Olson® All Pro™ Band Saw Blade Assortment, 93-1/2''

    …easy cutting.* Cuts a wide range of woods, plastic and non-ferrous metal.* Raker set clears the dust quickly, allowing rapid cutting.* Back Hardness of Rc 40-50.* Tooth Hardness: Rc 64-66. 3/16" Wide Band Saw Blade 93-1/2"* 3/16" width can cut a 3/8" radius circle!* 10 TPI offers the cleanest finish…

    4 Review(s)
    $52.49
  24. 6-Pc. Fractional Forstner Bit Set

    6-Pc. Fractional Forstner Bit Set

    …cutting edges that efficiently shear through wood.* Exterior cutting rim, along with the inner brad point, keeps the bit in position on the workpiece. As the rim cuts the outside "circle," the bit's two bottom edges quickly cut out the inner wood.* Wide flute openings allow for fast chip removal.*…

    20 Review(s)
    $33.49
  • Grid List
  • Page:
    1. 1
  • Items 1 - 24 of 24
  • Page:
    1. 1
Feedback X