Wood Stock

  • Items 1 - 24 of 233
  • Page:
    1. 1
    2. 2
    3. 3
  1. Purpleheart by the Piece-3/4" Thickness

    Purpleheart by the Piece-3/4" Thickness

    …especially when planing and moulding material with interlocked or wavy grain. * Nailing: The wood requires to be pre-bored, but nail-holding capabilities are reported to be good.* Steam Bending: The wood steam bends fairly well.* Strength Properties: Bending strength in the air-dry condition is very…

    17 Review(s)
    From: $10.49
  2. Basswood Carving Stock

    Basswood Carving Stock

    Available in lengths from 6'' to 48''.

    From: $0.70
  3. African Mahogany by the Piece-3/4" Thickness

    African Mahogany by the Piece-3/4" Thickness

    …S4S to 1/8", 1/4", 1/2" and 3/4" thicknesses. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations. Thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine jewelry boxes and whatever else…

    4 Review(s)
    From: $8.49
  4. Red River Gum Burl Turning Blanks

    Red River Gum Burl Turning Blanks

    …deep red color and attractive dark speckling of Red River Gumburls have made them a favorite choice for decorative turnings and sculpture.The wood is also strong, durable and termite resistant. These turning blanksare available in a range of sizes for small bowls, platters, carvings, bottlestoppers,…

    From: $9.99
  5. White Oak Lumber by the Lineal Inch

    White Oak Lumber by the Lineal Inch

    All of our lumber is premium grade stock. (FAS Grade First and Seconds). It is surfaced smooth on both faces (S2S) so planing is not required, and is guaranteed to be clear and free of defects on at least one side. This lumber is kiln dried to 7% to 8% moisture content. Note: The lumber on this page…

    From: $0.14
  6. Black Palm Turning Blanks

    Black Palm Turning Blanks

    Black Palm comes from the tough outer rings of a palm tree native to Australia and Southeast Asia. The wood has a distinctive streaked or speckled pattern, with a deep brown backdrop and flecks of black. It is hard, extremely durable but not as heavy as one would expect. These turning blanks are…

    8 Review(s)
    From: $2.29
  7. Mora Turning Stock

    Mora Turning Stock

    This Guatemalan variety of Mora wood is heavy, dense and ranges from pale brown to pale yellow in color. The sapwood from which these bowl blanks are taken yields a very smooth surface when turned and readily accepts wood treatment products. Blanks measure approximately 5" x 5" x 3".

    3 Review(s)
    $15.49
  8. Hormigo Turning Stock

    Hormigo Turning Stock

    …from the forests of Guatemala, Hormigo wood is often used in the construction of musical instruments such as the marimba. The main color of the wood is a warm reddish-orange with grain patterns varying from banding to curly flame accents. A beautiful, dense wood to turn with sharp tools to produce…

    $7.99
  9. Ready-to-use Turning Stock-2" x 2" x 18"

    Ready-to-use Turning Stock-2" x 2" x 18"

    …ready-to-use turning stock is square, rough sawn and ready for the lathe. Stock is ideal for turning spindles, finials, bun feet or for carving projects. The stock is approximately 2" square and available in 18" lengths. Choose from cherry, maple, oak, or walnut. May include sap wood. Technical…

    10 Review(s)
    From: $5.99
  10. Table Leg Turning Blanks, 3" x 3" x 36"

    Table Leg Turning Blanks, 3" x 3" x 36"

    Table Leg Turning Blanks, 3" x 3" x 36"These premium table leg blanks are cut from thick, clean stock, with no glue seams. They can be turned, tapered or shaped to your specifications - or you can simply sand and finish them for a basic rectangular table leg. Available inseveral species (see below).…

    From: $31.99
  11. Exotic Cutoffs, 10 lb. Box

    Exotic Cutoffs, 10 lb. Box

    A blend of assorted exotics - perfect for ornamental turnings and small projects. May include some rare species worth up to $25 per board foot. No two boxes are exactly the same! Sizes range from roughly 2" to 12" long. Widths and thicknesses vary widely. Box measures 8" x 6" x 12".

    32 Review(s)
    $29.99
  12. Stock Center Finder

    Stock Center Finder

    Works quickly and accurately to locate the center of stock for turning on a lathe or other purposes. No need for special calculations. This easy-to-use finder has no moving parts, so your measurements will be simple and consistent. Technical Details* Transparent yellow tinted plastic* Maximum 8"…

    6 Review(s)
    $9.79
  13. Beadlock® Tenon Stock

    Beadlock® Tenon Stock

    …3/8", and 1/2" widths. Technical Details:* Stock is specially designed for our Beadlock® Loose Tenon Joinery System (sold separately).* Flutes on the stock increase the amount of glue surface.* Save time by buying Beadlock® tenon stock in precut lengths of 1-1/2", 2", 2-1/2".* Available…

    6 Review(s)
    From: $7.99
  14. Bullet Cutter with 1/2" Blade for Rapid Stock Removal (RS232C)

    Bullet Cutter with 1/2" Blade for Rapid Stock Removal (RS232C)

    Replacement bullet-shaped cutter installs in the Robert Sorby RS200KT Multi-Tip Hollowing Tool (43224, sold separately) for rapid stock removal.

    $20.99
  15. Freud® LU90M Industrial Thin Stock Non-Ferrous Metal Saw Blades

    Freud® LU90M Industrial Thin Stock Non-Ferrous Metal Saw Blades

    …slice efficiently through the material without binding. The requirements on the cutting edge greatly differ wth non-ferrous metals than with cutting wood. With this in mind, Freud formulated a special carbide with high impact strength for this blade. Freud recommends use of a liquid lubricant when…

    From: $104.47
  16. Powermatic® Wood Lathe 2HP

    Powermatic® Wood Lathe 2HP

    …with low- and high-speed ranges and the spindle lock. The enhanced features include a digital RPM readout, built-in spindle indexing on the head stock and a redesigned tailstock with internal storage, chrome-trimmed handwheels and a laser-etched, self-ejecting quill. The tool rest assembly also has…

    $3999.99
  17. 1-9/16" Plyedge® Real Wood Edging

    1-9/16" Plyedge® Real Wood Edging

    If you can iron you can apply Plyedge®! Just position edge banding and heat with either our hand held iron or edge banding machine. This item backing creates a permanent bond. Then simply cut and trim edging to make plywood look like solid stock.

    2 Review(s)
    From: $7.99
  18. Jet® 16'' x 42'' Wood Lathe 1.5HP

    Jet® 16'' x 42'' Wood Lathe 1.5HP

    …a removable pin for boring through stock* Cam-lock mechanisms allow adjustments of headstock, tailstock and tool rest base without having to use tools* Hollow tailstock allows you to perform long hole boring for lamps and other vessels The JET 1642 Wood Lathes strike a perfect balance of…

    2 Review(s)
    $2344.99
  19. Jet® 16'' x 42'' Wood Lathe 2HP

    Jet® 16'' x 42'' Wood Lathe 2HP

    …operations* Built-in spindle locks let you remove or replace faceplates and chucks with ease* Live center has a removable pin for boring through stock* Cam-lock mechanisms allow adjustments of headstock, tailstock and tool rest base without having to use tools* Hollow tailstock allows you to perform…

    $2649.99
  20. Jet® Variable Speed Pro Benchtop Wood Lathe

    Jet® Variable Speed Pro Benchtop Wood Lathe

    …operations* Built-in spindle locks let you remove or replace faceplates and chucks with ease* Live center has a removable pin for boring through stock* Cam-lock mechanisms allow adjustments of headstock, tailstock and tool rest base without having to use tools* Hollow tailstock allows you to perform…

    $1137.99
  21. Jet® 14'' x 42'' Wood Lathe with Stand

    Jet® 14'' x 42'' Wood Lathe with Stand

    …operations* Built-in spindle locks let you remove or replace faceplates and chucks with ease* Live center has a removable pin for boring through stock* Cam-lock mechanisms allow adjustments of headstock, tailstock and tool rest base without having to use tools* Hollow tailstock allows you to perform…

    $1429.99
  22. Jet® 12'' x 35.5'' Wood Lathe with Stand

    Jet® 12'' x 35.5'' Wood Lathe with Stand

    …requirements* Indexing mechanism which allows for fast, efficient, fluting and veining operations* Live center has a removable pin for boring through stock* Cam-lock mechanisms allow adjustments of headstock, tailstock and tool rest base without having to use tools* Hollow tailstock allows you to…

    3 Review(s)
    $919.99
  23. Basswood Carving Stock-Select size

    Basswood Carving Stock-Select size

    Available in lengths from 6" to 48" . Sold by the inch. Minimum order length is 6" length and the maximum length is 48". Sizes are nominal. Minimum order quantity is 6" length

    11 Review(s)
    From: $0.70
  24. Ready-to-use Turning Stock-2" x 2" x 30"

    Ready-to-use Turning Stock-2" x 2" x 30"

    …ready-to-use turning stock is square, rough sawn and ready for the lathe. Stock is ideal for turning spindles, finials, bun feet or for carving projects. The stock is approximately 2" square and available in 30" lengths. Choose from cherry, maple, oak, or walnut. May include sap wood. Technical…

    10 Review(s)
    From: $9.99
  • Items 1 - 24 of 233
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X