Wood Lathe Accessories

  • Items 1 - 24 of 114
  • Page:
    1. 1
    2. 2
    3. 3
  1. Lathe Chuck and Tapers

    Lathe Chuck and Tapers

    …or #2 Morse taper listed to assemble as shown. Key is supplied with chuck. Both #20777 and either #20785 or #20793 need to be ordered to complete assembly as shown. This assembly is used on a lathe to hold a mandrel for turning wood pens and pencils. Note: Chuck shown with a Morse Taper installed

    9 Review(s)
    From: $16.99
  2. Rockler Lathe Tool Rests

    Rockler Lathe Tool Rests

    …provide more sliding surface without having to readjust. 5/8" diameter mounting post fits most mini and midi lathes. Technical Details:* 5/8" diameter mounting post fits most mini and midi lathes.* 5/16" round stainless steel tool rest.* Cast steel body with black epoxy finish.* Integrated mounting…

    5 Review(s)
    From: $19.99
  3. Nova Chuck Jaw Sets

    Nova Chuck Jaw Sets

    …across all chuck models.* All accessory jaws in the range will fit all the chucks in the range for optimumflexibility. Some, however, are not recommended. See individual jaws forrecommendations.* Nova chucks are specially designed so the jaws cut into the wood, grip firmly inthe contraction mode…

    From: $36.99
  4. Nova 10-in-1 Chuck Gauge

    Nova 10-in-1 Chuck Gauge

    …dovetail marking tool, ruler, protractor and faceplate marking tool. With over 10 functions, you'll work faster and have less clutter around your lathe. Made from heavy-duty polycarbonate. * Dovetail Gauge: A fast and easy way to create and check a dovetail recess. Perfect companion for your NOVA…

    $13.99
  5. Lathe Dust Hood

    Lathe Dust Hood

    Lathe dust collection has never been easier! Hood assembly features a hinged viewing shield that can swing up and out of the way. Hood mounts by clamping the bracket to the back of the lathe bed. * Includes convenient mounting bracket that allows easy installation onto many different styles of…

    10 Review(s)
    $24.99 $18.74

    SAVE 25%

  6. Face Plates

    Face Plates

    …a wide variety of lathe spindles just by changing the threaded insert. They fit Delta, Jet and other lathes. Great for small to medium sized projects. Mount the plates to a wide variety of lathe spindles just by changing the threaded insert. They fit Delta, Jet and other lathes. Great for small to…

    2 Review(s)
    $29.99
  7. Lathe Duplicator

    Lathe Duplicator

    …projects. This Lathe Duplicator attaches easily to almost any floor-model lathe, and the handwheel allows for smooth operation while cutting.* Will duplicate to a maximum length of 39" (depending on the lathe used)* Maximum duplication depth-of-cut of 2-3/8"* Suitable for lathe with a turning…

    14 Review(s)
    $331.99
  8. Nova Lathe Bed Extension

    Nova Lathe Bed Extension

    …with the Nova DVR XP and Nova 1624-44 lathes (45311 and 48465, sold separately). It is a solid cast iron unit that adds 20" to the spindle turning capacity of your lathe. Multiple units can be added as needed. * Each bed extension adds 20" to your lathe.* Add as many extensions as you like to…

    $209.99
  9. Nova Cole Jaw Set

    Nova Cole Jaw Set

    …across all chuck models.* All accessory jaws in the range will fit all the chucks in the range for optimum flexibility. Some, however, are not recommended. See individual jaws for recommendations.* Nova chucks are specially designed so the jaws cut into the wood, grip firmly in the contraction…

    0 Review(s)
    $83.99
  10. Robert Sorby Micro Gouge Blade

    Robert Sorby Micro Gouge Blade

    This 1/2" wide blade for the Robert Sorby Modular Handle is perfect for general purpose smoothing and shaping on the lathe. High speed steel.

    $20.99
  11. Lathe Faceplates, 1''-8 TPI

    Lathe Faceplates, 1''-8 TPI

    These aluminum lathe faceplates are CNC machined for minimal runout and feature large screw holes for more workholding power. They are available in 2'' diameter (48582) and 3'' diameter (44919) sizes. The 3'' diameter faceplate includes a set screw for use on reversible lathes, but the 2'' does not…

    From: $22.99
  12. Wood Lathe Tailstock Live Center, MT1

    Wood Lathe Tailstock Live Center, MT1

    Precision ball bearings bring you the smoothest possible turning with greater speed capabilities, and no need to lubricate. Live centers also allow greater clamping pressures while still retaining their incredibly smooth rotation. This center is precision machined to a 60 degree point and includes a…

    $24.99
  13. Nova Comet II Versaturn Grinding Wheel Attachment

    Nova Comet II Versaturn Grinding Wheel Attachment

    …safety shield and tool rest. * For use with the Nova Comet II Midi Lathe (46457, sold separately).* Easy to install and remove with the required Versaturn Coupler (48026, sold separately).* Variable speed adjustment on Comet II Lathe reduces tool edge burn.* 6" x 3/4" white-stone wheel.*…

    $52.49
  14. Carter Multi-Rest™ Work Support System

    Carter Multi-Rest™ Work Support System

    …in USA. Technical Details:* Compatible with lathe swing sizes from mini up to 20" with no additional hardware required.* With purchase of the 2" Lift Blocks (49120, sold separately below), the Multi-Rest can be used on even larger lathes.* The base of the MultiRest has independently…

    $359.95
  15. Nova SuperNova 2 Insert Chuck

    Nova SuperNova 2 Insert Chuck

    …and square wood.* Quality materials.* Precision machined in one operation from a solid steel block for optimal accuracy.* Polished self metal finish to allow for closer tolerances and accuracy.* Common accessory jaw fixing profile - compatible across all Nova chucks and accessories.* Jaw slides made…

    $199.99
  16. Nova Precision Midi 1" 8-TPI Direct Thread Chuck

    Nova Precision Midi 1" 8-TPI Direct Thread Chuck

    …square wood.* Quality materials.* Precision machined in one operation from a solid steel block for optimal accuracy.* Polished self metal finish to allow for closer tolerances and accuracy.* Common accessory jaw fixing profile — compatible across all Nova chucks and accessories.* Jaw slides…

    $119.99
  17. Pro Pen Turning Mandrel, #1 Morse Taper

    Pro Pen Turning Mandrel, #1 Morse Taper

    …bar is held in the lathe to ensure accurate pen turning when using a live center. No drill chuck is required - the mandrel is held directly in the morse taper of your lathe! The brass compression fitting allows you to turn shorter length blank without having to use a wood spacer. Simply slide…

    $13.99
  18. Robert Sorby Stebcentre with #2 Morse Taper

    Robert Sorby Stebcentre with #2 Morse Taper

    …bite to the point where kick back of the turning chisel is eliminated. The Stebcentre may also be removed without the need to stop and re-start the lathe. Simply wind back the tail stock and the piece can be withdrawn safely.Size refers to drive face diameter. Comes in diameters of 1/2", 7/8", and…

    From: $69.99
  19. Lathe Tool Holder

    Lathe Tool Holder

    Keep your turning tools within reach! This specially designed holder mounts to most flatbed lathes to keep up to 12 turning tools and other turning supplies at the ready.* 12" diameter tray features six slots for standard size tools and six for miniature tools and spins to make tool selection…

    14 Review(s)
    $27.99 $19.99

    SAVE 29%

  20. Nova DVR Wireless Remote

    Nova DVR Wireless Remote

    …almost any part of your lathe. * Compatible with any "Remote Enabled" Nova DVR Lathe.* Retrofit Kit Accessory (46435, sold separately) may be required for older DVR lathes.* To determine if you need the Retrofit Kit, look on your lathe for the "Remote Enabled" sticker. Lathes with this sticker do…

    $104.99
  21. Nova Dovetail Chisel

    Nova Dovetail Chisel

    Quickly cuts a dovetail that matches exactly with the dovetailed contour of your Nova Jaws, making it easy to mount bowl blanks onto your lathe. The precise fit and wedging action give the maximum holding power for your chuck. Although other chisels can be used, none have the dedicated shape of the…

    $39.99
  22. 1" X 8 TPI Insert

    1" X 8 TPI Insert

    Required accessory to mount the 4" Face Plate (91008, sold separately) to a lathe with a 1" x 8 tpi drive spindle.

    $9.99
  23. Nova G3 Insert Chuck

    Nova G3 Insert Chuck

    …square wood.* Quality materials.* Precision machined in one operation from a solid steel block for optimal accuracy.* Polished self metal finish to allow for closer tolerances and accuracy.* Common accessory jaw fixing profile — compatible across all Nova chucks and accessories.* Jaw slides…

    $149.99
  24. Adjustable Mandrel

    Adjustable Mandrel

    …perfect mandrel length for any pen kit. Just loosen the locking collar and adjust the mandrel as needed-no more hassling with spacers. Turn two barrels at once, or single barrels up to 6" long. Consult your lathe's instruction manual to determine the appropriate MT size. For 7mm pen bushings only.

    4 Review(s)
    $32.49
  • Items 1 - 24 of 114
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X