Wood Lathe Tool Rest

  • Items 1 - 24 of 31
  • Page:
    1. 1
    2. 2
  1. Rockler Lathe Tool Rests

    Rockler Lathe Tool Rests

    …finger along the edge of Rockler's premium Lathe Tool Rests, and you'll know instantly what a pleasure they are to use. That's because each tool rest is capped with a 5/16" round stainless steel bar, providing a silky smooth surface for your turning tools to glide across, and a comfortable contour…

    4 Review(s)
    From: $19.99
  2. Jet® 12'' x 35.5'' Wood Lathe with Stand

    Jet® 12'' x 35.5'' Wood Lathe with Stand

    …easily, this lathe can maintain consistent rpm through a much wider range of turning situations. Heavy-duty cast-iron lathe bed adds stability while limiting vibration during operation. Best of all, you can adjust the headstock, tailstock and tool rest base without having to use tools.* Headstock…

    3 Review(s)
    $919.99
  3. Nova Tool Rest

    Nova Tool Rest

    The tool rest is one of the most important features on any lathe. The rest should allow for maximum flexibility of chisel movement and provide adequate chisel support as close to the cutting edge as possible. These Nova tool rests are made of cast iron for excellent rigidity, and come with a…

    From: $26.99
  4. Lathe Tool Holder

    Lathe Tool Holder

    …your turning tools within reach! This specially designed holder mounts to most flatbed lathes to keep up to 12 turning tools and other turning supplies at the ready.* 12" diameter tray features six slots for standard size tools and six for miniature tools and spins to make tool selection…

    14 Review(s)
    $27.99 $23.99

    SAVE 14%

  5. Carter Hollow Roller™ Mounting Stud 1125-45

    Carter Hollow Roller™ Mounting Stud 1125-45

    …45 & 90 lathes and most lathes with a 1-1/8" tool rest post. Includes a second lengthened stud for the secondary tool rest. Technical Details:* Adapts your lathe to use the Carter Hollow Roller™ Vessel Turning System* Works with Powermatic 45 & 90 lathes and most lathes with a 1-1/8" tool rest

    $24.99
  6. Robert Sorby Handled TurnMaster Turning Tools-TurnMaster

    Robert Sorby Handled TurnMaster Turning Tools-TurnMaster

    …nitride coated M2 HSS. How to use the TurnMaster:* Set the head in a neutral position so that the cutter is horizontal when the tool is held flat on the lathe tool rest.* This is done by loosening the locking collar with the unique wrench and rotating the collar a minimum of two and half turns,…

    From: $108.99
  7. Square Carbide Mini Turning Tool

    Square Carbide Mini Turning Tool

    …the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue. Technical Details:* Ideal profile for flat or convex areas on spindles and pen turnings.* Diameter of square cutter is 3/8".* Total overall length of Mini Turning Tool

    1 Review(s)
    $69.99
  8. Jet® 16'' x 42'' Wood Lathe 2HP

    Jet® 16'' x 42'' Wood Lathe 2HP

    …a 2 x 12 to construct a solid tool or sandbag shelf* Tool storage basket conveniently holds chisels and other tools within easy reach of operator The JET 1642 Wood Lathes strike a perfect balance of versatility, cutting edge technology and performance. The 1642 Lathes have been designed and built to…

    $2649.99
  9. Jet® JWL-1015VS 10'' x 15'' Variable Speed Wood Lathe

    Jet® JWL-1015VS 10'' x 15'' Variable Speed Wood Lathe

    …of spindle speeds: 200 - 1050, 300 - 1750 and 600 - 3600 RPM* Number of indexing positions: 24* Distance between centers: 15-1/2"* Swing over tool rest base: 7-5/16"* Swing over bed: 10"* Spindle thread: 1"-8TPI* Spindle bore: 3/8"* Taper in tailstock spindle: MT2* Tailstock spindle travel: 2"*…

    $579.99
  10. Nova 57073 Outrigger Accessory for 2024 Lathe

    Nova 57073 Outrigger Accessory for 2024 Lathe

    …vibration-free performance. Note: Tool rest is not included (the outrigger accepts the same tool rest that comes with the 2024 lathe). * Fits Nova DVR 2024 lathe only (49055, sold separately).* Handles work up to 33" in diameter.* Space saving - does not add to lathe footprint.* Very quick and…

    $299.99
  11. Jet® 16'' x 42'' Wood Lathe 1.5HP

    Jet® 16'' x 42'' Wood Lathe 1.5HP

    …PRO Wood Lathe is a one-of-a-kind machine for the true wood turner. With a 1.5-hp motor and electronic inverter, you can operate the machine at any speed from 50 to 3,200 RPM. Cam-lock mechanisms allow adjustments of headstock, tailstock and tool rest base without having to use any tools at all.*…

    2 Review(s)
    $2344.99
  12. Powermatic® Wood Lathe 2HP

    Powermatic® Wood Lathe 2HP

    …chrome-trimmed handwheels and a laser-etched, self-ejecting quill. The tool rest assembly also has improved locking on a new profile tool rest that can accommodate an optional dust hood assembly that travels with the tool rest. Additional features include a set of dead centers to hold a spindle for…

    $3999.99
  13. Carter Multi-Rest™ Work Support System

    Carter Multi-Rest™ Work Support System

    …larger lathes.* The base of the MultiRest has independently adjustable spacer blocks that provide a secure fit on lathe beds with way sizes from 1" to 4.5" in width.* Multi-ring structure creates great rigidity while keeping the tool's weight to half that of a comparable full steel rest.*

    $359.95
  14. Jet® 14'' x 42'' Wood Lathe with Stand

    Jet® 14'' x 42'' Wood Lathe with Stand

    …tailstock and tool rest base without having to use tools* Hollow tailstock allows you to perform long hole boring for lamps and other vessels* Special cast-in webbings in legs accept 2 x 4's or a 2 x 12 to construct a solid tool or sandbag shelf Standard Equipment* 12" tool rest* 6" faceplate* Spur…

    $1429.99
  15. Nova 27007 Tool Rest Collar

    Nova 27007 Tool Rest Collar

    …Nova Tool Rest Collar acts as a stop collar for your Nova tool rest. It slides onto the tool rest shank, and maintains a fixed, repeatable height so you don't lose your height adjustment when you angle the rest for different angles of approach. 1" internal diameter fits many common tool rest models.…

    $15.99
  16. Jet® Variable Speed Pro Benchtop Wood Lathe

    Jet® Variable Speed Pro Benchtop Wood Lathe

    …Live center has a removable pin for boring through stock* Cam-lock mechanisms allow adjustments of headstock, tailstock and tool rest base without having to use tools* Hollow tailstock allows you to perform long hole boring for lamps and other vessels* Benchtop includes four non-skid rubber feet…

    $1137.99
  17. Jet® JWL-1015 10'' x 15'' Wood Lathe

    Jet® JWL-1015 10'' x 15'' Wood Lathe

    …6* Spindle speeds: 500, 840, 1240, 1800, 2630 and 3975 RPM* Number of indexing positions: 24* Distance between centers: 15-1/2"* Swing over tool rest base: 7-5/16"* Swing over bed: 10"* Spindle thread: 1"-8TPI* Spindle bore: 3/8"* Taper in tailstock spindle: MT2* Tailstock spindle travel: 2"*…

    $479.99
  18. Nova Outrigger Lathe Accessory

    Nova Outrigger Lathe Accessory

    …performance. Note: Tool rest is not included (the outrigger accepts the same tool rest that comes with your lathe). * Fits Nova 3000, Nova DVR, Nova DVR XP and Nova 1624-44 lathes (sold separately). * Handles work up to 29" (740mm) in diameter. * Space saving - does not add to lathe footprint. *…

    $284.99
  19. Laguna Mini Lathe Banjo Support Bracket

    Laguna Mini Lathe Banjo Support Bracket

    Outside Banjo Support Bracket for Laguna REVO 10 x 16 Mini Lathe. The Banjo Support Bracket is an accessory attachment for the Laguna REVO 10 x 16 Mini Lathe (#48234, sold separately). The bracket bolts onto your lathe to move the tool rest further away from the tail stock, increasing the bowl…

    $49.99
  20. Nova DVR 2024 20'' x 24'' Lathe

    Nova DVR 2024 20'' x 24'' Lathe

    …DVR Wood Lathe the perfect solution for a wide variety of projects from small pens to large bowls and platters.* Head swivels 360° and locks at any position, with detents at 0°, 22°, 45° and 90°. High accuracy and easy swivel.* All the versatility of a full swivel-head lathe with…

    $3149.99
  21. Diamond Carbide Mini Turning Tool

    Diamond Carbide Mini Turning Tool

    …stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue. Technical Details:* Ideal for use as a parting tool, and for tight profiles.* Total overall length of Mini Turning Tool is approximately 13-1/2".*…

    $69.99
  22. Round Carbide Mini Turning Tool

    Round Carbide Mini Turning Tool

    …the tool rest.* The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue. Technical Details:* Ideal for giving you a smooth finish on curved, concave surfaces and for general turning applications.* Total overall length of Mini Turning Tool is…

    1 Review(s)
    $69.99
  23. Carter Hollow Roller™ Mounting Stud 1000-60

    Carter Hollow Roller™ Mounting Stud 1000-60

    lathes with a longer 1" tool rest post. Includes a second lengthened stud for the secondary tool rest. Technical Details:* Adapts your lathe to use the Carter Hollow Roller™ Vessel Turning System* Works with Laguna 163, Oneway 2036, Oneway 2436, Powermatic 3520, Powermatic 4224 and most lathes

    $24.99
  24. Carter Hollow Roller™ Mounting Stud 1125-65

    Carter Hollow Roller™ Mounting Stud 1125-65

    …and most lathes with a longer 1-1/8" tool rest post. Includes a second lengthened stud for the secondary tool rest. Technical Details:* Adapts your lathe to use the Carter Hollow Roller™ Vessel Turning System* Works with Powermatic 3520 and most lathes with a longer 1-1/8" tool rest post*…

    $24.99
  • Items 1 - 24 of 31
  • Page:
    1. 1
    2. 2
Feedback X